Compression behaviour and strengthening mechanisms for Cu hybrid composites

References

• Ramkumar KR, Natarajan S. Investigations on microstructure and mechanical properties of TiO2 nanoparticles addition in Al 3003 alloy joints by gas tungsten arc welding. Mater Sci Eng A. 2018;727:51–60.
   Web of Science ®Google Scholar
• Radhika N, Teja RNK, Rahul K, et al. Fabrication of Cu-Sn-Ni/SiC FGM for automotive applications: investigation of its mechanical and tribological properties. Silicon. 2018;1–12. DOI:10.1007/s12633-017-9657-3
   Web of Science ®Google Scholar
• Nageswaran G, Natarajan S. Synthesis, structural characterization, mechanical and wear behaviour of Cu-TiO2-Gr hybrid composite through stir casting technique. J Alloys Compd. 2018;768:733–741.
   Web of Science ®Google Scholar
• Ramkumar KR, Natarajan S. Optimisation of GTAW Al 3003 weld using fabricated nanocomposite filler metal. Mater Manuf Processes. 2018;34(3):293–302.
   Web of Science ®Google Scholar
• Tjong S. Microstructural and mechanical characteristics of in situ metal matrix composites, material science and engineering R reports. Mater Sci Eng R Rep. 2017;29(3–4):49–113.
   Google Scholar
• Sam M, Radhika N. Development of functionally graded Cu-Sn-Ni/Al₂O₃ composite for bearing applications and investigaton of its mechanical and wear behaviour. Particulate Science Technology; 2017; DOI:10.1080/02726351.2017.1364312
   Google Scholar
• Sanesh K, Sunder SS, Radhika N. Effect of reinforcement content on the adhesive wear behavior of Cu10Sn5Ni/Si3N4 composites produced by stir casting. International Journal Mineral And Metallurgy. 2017;24(9):1052–1060.
   Web of Science ®Google Scholar
• Thankachan T, Soorya Prakash K, Kavimani V. Effect of friction stir processing and hybrid reinforcements on copper. Mater Manuf Processes. 2018;33(15):1681–1692.
   Web of Science ®Google Scholar
• Thankachan T, Soorya Prakash K, Loganathan M. WEDM process parameter optimization of FSPed copper-BN composites. Mater Manuf Processes. 2018;33:350–358.
   Web of Science ®Google Scholar
• Ma ZY, Feng AH, Chen DL, et al. Recent advances in friction stir welding/processing of aluminum alloys: microstructural evolution and mechanical properties. Critl Rev Solid State Mater Sci. 2018;43(4):269–333.
   Web of Science ®Google Scholar
• Seetharam R, Subbu SK, Davidson, et al. Influence of reinforcement particles on dynamically recrystallized grain of hot upset sintered Al-B4C composites. J Mater Eng Perform. 2022;31(11):9083–9096.
   Web of Science ®Google Scholar
• Raj Kumar D, Jeyaprakash N, Yang CH. Investigation on drilling behavior of CFRP composites using optimization technique. Arab J Sci Eng. 2020;45(11):8999–9014.
   Web of Science ®Google Scholar
• Jeyaprakash N, Yang CH, Ramkumar KR. Microstructure and wear resistance of laser cladded Inconel 625 and Colmonoy 6 depositions on Inconel 625 substrate. Appl Phys A. 2020;126(6):1–11.
   Web of Science ®Google Scholar
• Ramkumar KR, Natarajan S. Tensile properties and strengthening effects of Al 3003 alloy weldment reinforced with TiO2 nanoparticles. Composites. 2019;175:107159.
   Google Scholar
• Téllez-Villaseñor MA, León-Patiño CA, Aguilar-Reyes EA, et al. Effect of load and sliding velocity on the wear behaviour of infiltrated TiC/Cu–Ni composites. Wear. 2021;203667.
   Web of Science ®Google Scholar
• Zhang Y, Fang S, Wang Y, et al. Simultaneous enhancement of tensile strength and ductility of titanium by optimizing its bimodal microstructure. Mater Sci Eng A. 2021;803:140701.
   Google Scholar
• Charan MS, Naik AK, Kota N, et al. Review on development of functionally graded composite materials. Int Mater Rev. 2022;67(8):797–863.
   Web of Science ®Google Scholar
• Ramkumar KR, Natarajan S. Retardation of grain growth in Al 3003 nanocomposite weldment using ARB filler metal. Met Mater Int. 2021;27(7):2450–2460.
   Web of Science ®Google Scholar
• Kota N, Charan MS, Laha T, et al. Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties. Ceram Int. 2022;48(2):1451–1483.
   Web of Science ®Google Scholar
• Tang S, Ummethala R, Suryanarayana C, et al. Additive manufacturing of aluminum-based metal matrix composites—a review. Adv Eng Mater. 2021;23(7):1–17.
   Web of Science ®Google Scholar
• Schukraft J, Lohr C, Weidenmann KA. 2D and 3D in-situ mechanical testing of an interpenetrating metal ceramic composite consisting of a slurry-based ceramic foam and AlSi10Mg, Compos. Struct. 2021;263:113742.
   Google Scholar
• Zhang JF, Zhang XX, Andra H, et al. A fast numerical method of introducing the strengthening effect of residual stress and strain to tensile behavior of metal matrix composites. J Mater Sci Technol. 2021;87:167–175.
   Web of Science ®Google Scholar
• Sun R, Cao Z, Zhang Y, et al. Laser shock peening of SiCp/2009Al composites: microstructural evolution, residual stress and fatigue behavior. Materials. 2021;14(1):1–13.
   Google Scholar
• Zamani SMM, Behdinan K, Mohammadpour A, et al. Friction stir welding of Al-SiC composite sheets: a numerical simulation of residual stresses. Int J Adv Manuf Technol. 2021;116(11–12):3717–3729.
   Web of Science ®Google Scholar
• He L, Pagan DC, Nardi A, et al. Synchrotron X-ray diffraction studies of the phase-specific deformation in additively manufactured Ni – CrC composites, Compos. Part B. 2021;222:109086.
   Web of Science ®Google Scholar
• Oza MJ, Günter K, Claudia E, et al. Developing a hybrid Al–SiC-graphite functionally graded composite material for optimum composition and mechanical properties. Sci Eng A. 2021;805:140625.
   Web of Science ®Google Scholar
• Jana P, Jaydeepkumar M, Günter K, et al. Study of the elastic properties and thermal shock behavior of Al – SiC-graphite hybrid composites fabricated by spark plasma sintering. Ceram Int. 2021;48(4):5386–5396.
   Web of Science ®Google Scholar
• Ramkumar KR, Natarajan S. Effects of TiO2 nanoparticles on the microstructural evolution and mechanical properties on accumulative roll bonded Al nanocomposites. J Alloys Compd. 2019;793:526–532.
   Web of Science ®Google Scholar
• Oza MJ, Schell KG, Bucharsky EC, et al. Developing a hybrid Al–SiC-graphite functionally graded composite material for optimum composition and mechanical properties, Mater. Sci Eng. 2021;805:140625.
   Google Scholar
• Schukraft J, Lohr C, Weidenmann KA. 2D and 3D in-situ mechanical testing of an interpenetrating metal ceramic composite consisting of a slurry-based ceramic foam and AlSi10Mg, Compos. Struct. 2021;263:113742.
   Google Scholar