Experimentation and characterization of stir casted bio mesquite wood ash (M.W.A.) reinforced aluminium (Al6061 T6) matrix hybrid composites

References

• Raviraj MS, Sharanprabhu CM, Mohankumar GC. Experimental analysis on processing and properties of Al-TiC metal matrix composites. Journal Of Procedia Materials Science. 2014;5:2032–2038.
   Google Scholar
• Reza Ezatpour H, Abolkarim Sajjadi S, Haddad Sabzevar M, et al. Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting. J Mater Des. 2014;55:921–928.
   Web of Science ®Google Scholar
• Manjunatha B, Niranjan HB, Satyanarayana KG. Effect of mechanical and thermal loading on boron carbide particles reinforced Al-6061 alloy. Journal Of Material Science & Engineering. 2015;632:147–155.
   Google Scholar
• Chandra Kandpal B, Kumar J, Singh H. Fabrication and characterisation of Al2O3/aluminium alloy 6061 composites fabricated by Stir casting. Journal Of Materials Today: Proceedings. 2017;4(2):2783–2792.
   Google Scholar
• Bharath V, Madev Nagaral VA, Koric SA. Preparation of 6061Al-Al2O3 MMC’s by stir casting and evaluation of mechanical and wear properties. Journal Of Procedia Materials Science. 2014;6:1658–1667.
   Google Scholar
• Umanath K, Selvamani ST, Palanikumar K, et al. Dry sliding wear behaviour of AA6061-T6 reinforced SiC and Al2O3 particulate hybrid composites. Journal Of Procedia Engineering. 2014;97:694–702.
   Google Scholar
• Reza Ezatpour H, Abolkarim Sajjadi S, Haddad Sabzevar M, et al. An investigation of the tensile and compressive properties of Al6061 and its nanocomposites in as-cast state and extruded condition. J Mater Sci And Eng A. 2014;607:589–595.
   Google Scholar
• Chaithanyasai A, Pragnya Rani Vakchore PR, Umasankar V. The microstructural and mechanical property study of effects of EGGSHELL particles on the Aluminum 6061. Journal Of Procedia Engineering. 2014;97:961–967.
   Google Scholar
• Hassan SB, Aigbodion VS. Effects of eggshell on the microstructures and properties of Al–Cu–Mg/eggshell particulate composites. J King Saud Univ Sci. 2015;27(1):49–56.
   Google Scholar
• Athijayamani AS, Jose A, Ramanathan K, et al. Effects of addition of Prosopis juliflora fiber on the physical and mechanical properties of wood dust and coir pith particle reinforced phenol formaldehyde hybrid composite. Journal Of Advances In Chemistry. 2017;13(10):6558–6562.
   Google Scholar
• Allwyn Kingsly Gladston J, Dinaharan I, Sheriff NM, et al. Dry sliding wear behavior of AA6061 aluminum alloy composites reinforced rice husk ash particulates produced using compocasting. J Asian Ceram Soc. 2017;5(2):127–135.
   Web of Science ®Google Scholar
• Kathirvel P, Amal Anik G, Raja Mohan Kaliyaperumal S, et al. Effect of partial replacement of cement with Prosopis juliflora ash on the strength and microstructural characteristics of cement concrete. J Constr Build Mater. 2019;225:273–282.
   Web of Science ®Google Scholar
• Surya Rajan B, Saibalaji MA, Mohideen S. Tribological performance evaluation of epoxy modified phenolic FC reinforced with chemically modified Prosopis juliflora bark fiber. Journal Of Material Research Express. 2019;6(7):075313.
   Web of Science ®Google Scholar
• Santhosh MS, Karthikeyan G, Sasikumar R, et al. Mechanical and morphological behaviour of rice husk/Prosopis juliflora reinforced bio composites. Journal Of Materials Today Proceedings. 2019;27:556–560.
   Google Scholar
• Manoj Kumar G, Uthranarayan C, Jones Joseph Jebaraj D, et al. Exploration of tensile, flexural and hardness test properties of Prosopis Juliflora/glass/epoxy hybrid composite laminates. J Phys. 2019;1362:012015.
   Google Scholar
• Santhoskumar AU, Jaya Chitra N. Studies on mechanical and thermal properties of P.P. with natural carbon powder. Journal Of Chemical Methodologies. 2018;3:346–35.
   Google Scholar
• Surya Rajan B, Saibalaji MA, Mohideen S. Tribological performance evaluation of epoxy modified phenolic FC reinforced with chemically modified Prosopis juliflora bark fiber. Journal Of Material Research Express. 2019;6(7):075313.
   Web of Science ®Google Scholar
• PonnarenganHariharasakthisudhan P, Jose S, Manisekar K. Dry sliding wear behaviour of single and dual ceramic reinforcements premixed with Al powder in AA6061 matrix. J Mater Res Technol. 2018;8(1):275–283.
   Google Scholar
• Hariharasakthisudhan P, Jose S. Influence of metal powder premixing on mechanical behavior of dual reinforcement (Al2o3 (μm)/Si3N4 (nm)) in AA6061 matrix. J Alloys Compd. 2017;731:100–110.
   Web of Science ®Google Scholar
• Bharathesha TP, Ramesh CS, Keshavamurthy R, et al. Effect of hot forging on mechanical characteristics of Al6061-TiO2 metal matrix composite. Journal Of Materials Today Proceedings. 2015;2(4–5):2005–2012.
   Google Scholar
• Lokesh T, Mallik US, “Effect of ECAP process on the microstructure and mechanical properties of Al6061-Gr composites”, Journal of Materials Today: Proceedings, 5, 2453–2461, 2018.
   Google Scholar
• Raghav GR, AN B, Selvakumar N, et al. Effect of tungsten reinforcement on mechanical, tribological and corrosion behavior of mechanically alloyed Co-25C Cermets nanocomposites. Journal Of Materials Research Express. 2019;6(11):1165–4.
   Web of Science ®Google Scholar
• Charitha BP, Rao P. An ecofriendly approach for corrosion control of 6061 Al-15 % (v) SiC (P) composite and its base alloy. Chin J Chem Eng. 2016;S1004-9541(3):30334–2.
   Google Scholar
• Hullur MK, Goudar DM, Venkateshwaralu K, et al. Sliding wear behaviour of in situ TiB2 reinforced hypoeutectic Al-Si alloy composites. Inter Metal Cast. 2022;17(2):1179–1190. DOI:10.1007/s40962-022-00847-0
   Web of Science ®Google Scholar
• Sun W, Wei Yee Tan A, Marinescu I, et al. Adhesion, tribological and corrosion properties of cold-sprayed Co-Cr- Mo and Ti6Al4V coatings on 6061-T651 Al alloy. Journal Of Surface & Coatings Technology. 2017;326:291–298.
   Web of Science ®Google Scholar
• Shrivastava V, Gaurav Kumar Gupta IBS, Singh IB. Heat treatment effect on the microstructure and corrosion behavior of Al-6061 alloy with influence of α-nanoalumina reinforcement in 3.5% NaCl solution. J Alloys Compd. 2018;775:628–638.
   Web of Science ®Google Scholar
• Gopinath S, Prince M, Raghav GR. Enhancing the mechanical, wear and corrosion behavior of stir cast aluminium 6061 hybrid composites through the incorporation of boron nitride and aluminium oxide particles. International Journal Of Materials Research Express. 2020;7(1):016582.
   Web of Science ®Google Scholar