Damping properties of magnesium surface layers developed by friction stir processing

References

• Hiremath P, Sharma S, M C G, et al. Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels – a numerical analysis. J Mater Res Technol. 2020;9:8439–8450.
   Google Scholar
• Kahrobaee S, Hejazi TH, Ahadi Akhlaghi I. Electromagnetic methods to improve the nondestructive characterization of induction hardened steels: a statistical modeling approach Surf. Coatings Technol. 2019;380:125074.
   Web of Science ®Google Scholar
• Cao YJ, Sun JQ, Ma F, et al. Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel. Tribol Int. 2017;115:108–115.
   Web of Science ®Google Scholar
• Wang X, Meng Q, Wang Z, et al. Prediction of the surface characteristic of 42CrMo after spot continual induction hardening based on a novel co-simulation method. Surf Coat Technol. 2019;357:252–266.
   Web of Science ®Google Scholar
• Amanov A. Wear resistance and adhesive failure of thermal spray ceramic coatings deposited onto graphite in response to ultrasonic nanocrystal surface modification technique. Appl Surf Sci. 2019;477:184–197.
   Web of Science ®Google Scholar
• Choy KL. Chemical vapour deposition of coatings. Prog Mater Sci. 2003;48(2):57–170.
   Web of Science ®Google Scholar
• Lee WB, Lee CY, Kim MK, et al. Microstructures and wear property of friction stir welded AZ91 Mg/SiC particle reinforced composite. Compos Sci Technol. 2006;66(11–12):1513–1520.
   Web of Science ®Google Scholar
• Dhanesh Babu SD, Sevvel P, Senthil Kumar R, et al. Development of thermo mechanical model for prediction of temperature diffusion in different FSW tool pin geometries during joining of AZ80A Mg Alloys. J Inorg Organomet Polym. 2021;31(7):3196–3212.
   Web of Science ®Google Scholar
• Yaknesh S, Sampathkumar K, Sevvel P. Sampathkumar K and sevvel p. Effect of tool pin geometry and process parameters during FSW of dissimilar Alloys of Mg. Mater Res. 2022;25:e20210508.
   Web of Science ®Google Scholar
• Satheesh C, Sevvel P, Senthil Kumar R. Experimental identification of optimized process parameters for FSW of AZ91C Mg Alloy using quadratic regression models. Stroj Vestn/J Mech Eng. 2020;66(12):736–751.
   Web of Science ®Google Scholar
• Sharma V, Prakash U, Kumar BVM. Surface composites by friction stir processing: a review. J Mater Process Technol. 2015;224:117–134.
   Web of Science ®Google Scholar
• Rohatgi PK, Nath D, Singh SS, et al. Factors affecting the damping capacity of cast aluminium-matrix composites. J Mater Sci. 1994;29(22):5975–5984.
   Web of Science ®Google Scholar
• Lan FY, Chen HM, Guo WP, et al. Effects of friction stir processing on mechanical properties and damping capacities of AZ31 Magnesium Alloys. IOP Conf Ser Mater Sci Eng. 2017;230:012013.
   Google Scholar
• Tang YT, Zhang C, Ren LB, et al. Effects of Y content and temperature on the damping capacity of extruded Mg-Y sheets. J Magnes Alloy. 2019;7(3):522–528.
   Web of Science ®Google Scholar
• Wang J, Wu Z, Gao S, et al. Optimization of mechanical and damping properties of Mg–0.6Zr alloy by different extrusion processing. J Magnes Alloy. 2015;3(1):79–85.
   Google Scholar
• Zheng MY, Fan GD, Tong LB, et al. Damping behavior and mechanical properties of Mg-Cu-Mn alloy processed by equal channel angular pressing. Trans Nonferrous Met Soc. 2008;18:33–38.
   Web of Science ®Google Scholar
• Yokesh Kumar B, Sevvel P. Impact of speed of traverse during joining of CDA101 plates by FSW process.Sci. Iran. 2022;29:1817–1827.
   Google Scholar
• Giridharan K, Sevvel P, Stalin B, et al. Microstructural analysis and mechanical behaviour of Copper CDA 101/AISI-SAE 1010 dissimilar metal welds processed by friction stir welding. Mater Res-IBERO-AM. 2022;25:20210430.
   Web of Science ®Google Scholar
• Dhanesh Babu SD, Sevvel P, Senthil Kumar R. Simulation of heat transfer and analysis of impact of tool pin geometry and tool speed during friction stir welding ofAZ80A Mg alloy plates. J Mech Sci Technol. 2020;34(10):4239–4250.
   Web of Science ®Google Scholar
• Sevvel P, Dhanesh Babu SD, Senthil Kumar R. “Peak temperature correlation and temperature distribution during joining of AZ80A Mg Alloy by FSW – a numerical and experimental investigation. Stroj Vestn/J Mech Eng. 2020;66(6):395–407.
   Web of Science ®Google Scholar
• Sevvel P, Satheesh C, Senthil Kumar R. Generation of regression models and multi- response optimization of friction stir welding technique parameters during the fabrication of AZ80A Mg alloy joints. Trans Can Soc Mech Eng. 2020;44(2):311–324.
   Web of Science ®Google Scholar
• Venkateswara Reddy K, Bheekya Naik R, Madhusudhan Reddy G, et al. Damping capacity of friction stir processed commercial pure aluminium metal. Mater Today Proc. 2019;27:2061.
   Google Scholar
• Asadi P, Besharati Givi MK, Parvin N, et al. On the role of cooling and tool rotational direction on microstructure and mechanical properties of friction stir processed AZ91. Int J Adv Manuf Technol. 2012;63(9–12):987–997.
   Web of Science ®Google Scholar
• Zheng FY, Wu YJ, Peng LM, et al. Microstructures and mechanical properties of friction stir processed Mg–2.0Nd–0.3Zn–1.0Zr magnesium alloy. J Magnes Alloy. 2013;1(2):122–127.
   Google Scholar
• Hu XS, Zhang YK, Zheng MY, et al. A study of damping capacities in pure Mg and Mg–Ni alloys. Scr Mater. 2005;52(11):1141.
   Web of Science ®Google Scholar
• Zhang J, Perez RJ, Wong CR, et al. Lavernia. effect of sic and graphite particulates on the damping behavior of metal matrix composites. Mater Sci Eng R. 1994;42(2):395–405.
   Google Scholar
• Fan GD, Zheng MY, Hu XS, et al. Improved mechanical property and internal friction of pure Mg processed by ECAP. Mater Sci Eng A. 2012;556:588–594.
   Web of Science ®Google Scholar
• Jiang HJ, Liu CY, Zhang B, et al. Simultaneously improving mechanical properties and damping capacity of Al-Mg-Si alloy through friction stir processing.Mater. Charact. 2017;131:425.
   Web of Science ®Google Scholar