Silicon carbide particulate reinforced dual phase brass composites with improved wear resistance prepared via friction stir processing

References

• Farabi E, Zarei-Hanzaki A, Moghaddam M, et al. Microstructural evolution and mechanical properties of accumulative back extruded duplex (α + β) brass. Mater Charact. 2019;152:101–114. doi: 10.1016/j.matchar.2019.03.039
   Web of Science ®Google Scholar
• Fang XT, He GZ, Zheng C, et al. Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass. Acta Materialia. 2020;186:644–655. doi: 10.1016/j.actamat.2020.01.037
   Web of Science ®Google Scholar
• Moshkovich A, Perfilyev V, Lapsker I, et al. Friction, wear and plastic deformation of Cu and α/β brass under lubrication conditions. Wear. 2014;320:34–40. doi: 10.1016/j.wear.2014.08.016
   Web of Science ®Google Scholar
• Filippova AV, Yu Tarasov S, Fortuna SV, et al. Microstructural, mechanical and acoustic emission-assisted wear characterization of equal channel angular pressed (ECAP) low stacking fault energy brass. Tribol Int. 2018;123:273–285. doi: 10.1016/j.triboint.2018.03.023
   Web of Science ®Google Scholar
• Ghorbani M, Mazaheria M, Khangholi K, et al. Electrodeposition of graphite brass composite coatings and characterization of the tribological properties. Surf Coat Technol. 2001;148(1):71–76. doi: 10.1016/S0257-8972(01)01322-6
   Web of Science ®Google Scholar
• Li NL, Bouchart V, Chevrier P, et al. Densification behaviour and wear performance of brass-based composite reinforced with SiO2 nanoparticles: switchable water pump clutch application. Tribology Lett. 2019;67(2):41. doi: 10.1007/s11249-019-1154-y
   Web of Science ®Google Scholar
• Kaczmar JW, Granat K, Pietrzak K, et al. Tribological studies of composite material based on CuZn38Al2Mn1Fe brass strengthened with δ-alumina fibres. Arch Foundry Eng. 2010;10:27–30.
   Google Scholar
• Yih P, Chung DDL. Brass-matrix silicon carbide whisker composites prepared by powder metallurgy. J Mater Sci. 1999;34(2):359–364. doi: 10.1023/A:1004426210456.
   Web of Science ®Google Scholar
• Imai H, Kosaka Y, Kojima A, et al. Characteristics and machinability of lead-free P/M Cu60–Zn40 brass alloys dispersed with graphite. Powder Technol. 2010;198(3):417–421. doi:10.1016/j.powtec.2009.12.010
   Web of Science ®Google Scholar
• Yan A, Wang Z, Wang ZY. High power diode laser clad Cu-WC-Ni composite coatings on brass for wear resistance enhancement. Adv Mater Res. 2013;816-817:47–53. doi: 10.4028/scientific.net/AMR.816-817.47
   Google Scholar
• Rathee S, Maheshwari S, Siddiquee AN, et al. A review of recent progress in solid state fabrication of composites and functionally graded systems via friction stir processing. Critl Rev Solid State Mater Sci. 2018;43(4):334–366. doi: 10.1080/10408436.2017.1358146.
   Web of Science ®Google Scholar
• Xu N, Chen L, Feng RN, et al. Recrystallization of Cu-30Zn brass during friction stir welding. J Mater Res Technol. 2020;9(3):3746–3758. doi: 10.1016/j.jmrt.2020.02.001
   Google Scholar
• Heidarzadeh A, Saeid T. A comparative study of microstructure and mechanical properties between friction stir welded single and double phase brass alloys. Mater Sci Eng A. 2016;649:349–358. doi: 10.1016/j.msea.2015.10.012
   Web of Science ®Google Scholar
• Sharma V, Prakash U, Manoj Kumar BV. Surface composites by friction stir processing: a review. J Mater Process Technol. 2015;224:117–134. doi: 10.1016/j.jmatprotec.2015.04.019
   Web of Science ®Google Scholar
• Ebrahimi M, Par MA. Twenty-year uninterrupted endeavor of friction stir processing by focusing on copper and its alloys. J Alloys Compd. 2019;781:1074–1090. doi: 10.1016/j.jallcom.2018.12.083
   Web of Science ®Google Scholar
• Yousefpour H, Mousavi SAAA. Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing. Compos Sci Technol. 2016;3:562–593. In Persian.
   Google Scholar
• Heidarzadeh A, Taghizadeh B, Mohammadzadeh A. Microstructure and mechanical properties of CuZn‑Al2O3 nanocomposites produced by friction stir processing. Arch Civil Mech Eng. 2020;20(3):98. doi: 10.1007/s43452-020-00102-5
   Web of Science ®Google Scholar
• Heidarzadeh A, Taghizadeh B, Mohammadzadeh A. In-situ formation of Zn oxide particles in CuZn matrix during friction stir processing. J Adhes Sci Technol. 2021;35(9):1006–1013. doi: 10.1080/01694243.2020.1826829
   Web of Science ®Google Scholar