Effect of SAW electrode wire preheating current on its melting rate and weldment properties of HSLA steel joint

References

• Gao X, Wang Y, Chen Z, et al. Analysis of welding process stability and weld quality by droplet transfer and explosion in MAG-laser hybrid welding process. J Manuf Processes. 2018;32:522–529. doi: 10.1016/j.jmapro.2018.03.024
   Web of Science ®Google Scholar
• Sharma SK, Maheshwari S, Singh RKR. Modeling and optimization of HAZ characteristics for submerged arc welded high strength pipeline steel. Trans Indian Inst Met. 2018;72(2):439–454. doi: 10.1007/s12666-018-1495-5
   Web of Science ®Google Scholar
• Singh RP, Garg RK, Shukla DK. Mathematical modeling of effect of polarity on weld bead geometry in submerged arc welding. J Manuf Processes. 2016;21:14–22. doi:10.1016/j.jmapro.2015.11.003
   Web of Science ®Google Scholar
• Küçüköner H, Karakoç H, Kahraman N, et al. Investigation of microstructure and mechanical properties of AISI2205/DIN-P355GH steel joint by submerged arc welding. J Manuf Processes. 2020;59:566–586. doi:10.1016/j.jmapro.2020.10.023
   Web of Science ®Google Scholar
• Choudhury S, Sharma A, Mohanty UK, et al. Mathematical model of complex weld penetration profile: a case of square AC waveform arc welding. J Manuf Processes. 2017;30:483–491. doi: 10.1016/j.jmapro.2017.10.015
   Web of Science ®Google Scholar
• Chandel RS, Seow HP, Cheong FL, et al. Effect of increasing deposition rate on the bead geometry of submerged arc welds. J Mater Process Technol. 1997;72(1):124–128. doi: 10.1016/S0924-0136(97)00139-8
   Web of Science ®Google Scholar
• Lu Y, Chen S, Shi Y, et al. Double-electrode arc welding process: Principle, variants, control and developments. J Manuf Processes. 2014;16:93–108. doi: 10.1016/j.jmapro.2013.08.003
   Web of Science ®Google Scholar
• Ramakrishnan M, Muthupandi V. Application of submerged arc welding technology with cold wire addition for drum shell long seam butt welds of pressure vessel components. Int J Adv Manuf Technol. 2012;65(5–8):945–956. doi: 10.1007/s00170-012-4230-0
   Web of Science ®Google Scholar
• Kiran DV, Cho D-W, Song W-H, et al., Arc interaction and molten pool behavior in the three wire submerged arc welding process. Int J Heat & Mass Trans. 2015;87:327–340. doi:10.1016/j.ijheatmasstransfer.2015.04.020
   Web of Science ®Google Scholar
• Om H, Pandey S. Effect of process parameters on weld penetration shape factor in ASAW. Int J Innovat Res Sci Eng Technol. 2014;3:13590–13596.
   Google Scholar
• Tušek J, Suban M. High-productivity multiple-wire submerged-arc welding and cladding with metal-powder addition. J Mater Process Technol. 2003;133(1–2):207–213. doi: 10.1016/S0924-0136(02)00235-2
   Web of Science ®Google Scholar
• Singh S, Kumar M, Meena ML, et al. Investigating the wire preheating current on dilution and angular distortion on thick plate of ASTM A709 Gr 36 steel. Weld Int. 2021;35(4–6):127–137. doi: 10.1080/09507116.2021.1977591
   Google Scholar
• Choudhary A, Kumar M, Unune DR. Investigating effects of resistance wire heating on AISI 1023 weldment characteristics during ASAW. Mater Manuf Processes. 2017;33(7):759–769. doi: 10.1080/10426914.2017.1415441
   Web of Science ®Google Scholar
• Sharma SK, Maheshwari S, Singh RKR. Effect of heat-input and cooling-time on bead characteristics in SAW. Mater Manuf Processes. 2018;34(2):208–215. doi: 10.1080/10426914.2018.1532578
   Web of Science ®Google Scholar
• Chandel RS. Electrode melting and plate melting efficiencies of submerged arc welding and gas metal arc welding. Mater Sci Technol. 2013;6(8):772–777. doi: 10.1179/mst.1990.6.8.772
   Google Scholar
• Shahi AS, Pandey S. Effect of auxiliary preheating of the filler wire on quality of gas metal arc stainless steel claddings. J Materi Eng Perform. 2007;17(1):30–36. doi: 10.1007/s11665-007-9132-1
   Web of Science ®Google Scholar
• Kamble AG, Venkata Rao R. Effects of process parameters and thermo-mechanical simulation of gas metal arc welding process. Int J Model Simulat. 2016;36:170–182. doi: 10.1080/02286203.2016.1188343
   Google Scholar
• Panchal HN, Patel N. ANSYS CFD and experimental comparison of various parameters of solar still. Int J Ambient Energy. 2017;39(6):551–557. doi: 10.1080/01430750.2017.1318785
   Web of Science ®Google Scholar
• George F, Voort V, Lampman SR, et al. Metallogr Microstruct. 2004;9:44073–40002. doi: 10.1361/asmhba0003752
   Google Scholar
• Prasad K, Dwivedi DK. Some investigations on microstructure and mechanical properties of submerged arc welded HSLA steel joints. Int J Adv Manuf Technol. 2006;36(5–6):475–483. doi: 10.1007/s00170-006-0855-1
   Web of Science ®Google Scholar
• Shen S, Oguocha INA, Yannacopoulos S. Effect of heat input on weld bead geometry of submerged arc welded ASTM A709 grade 50 steel joints. J Mater Process Technol. 2012;212(1):286–294. doi: 10.1016/j.jmatprotec.2011.09.013
   Web of Science ®Google Scholar