References
- Kruzic JJ, Arsecularatne JA, Tanaka CB, et al. Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics. J Mech Behav Biomed Mater. 2018;88:504–533. doi: 10.1016/j.jmbbm.2018.08.008
- Ayyagari A, Hasannaeimi V, Grewal HS, et al. Corrosion, erosion and wear behavior of complex concentrated alloys: a review. Metals. 2018;8(8):603. doi: 10.3390/met8080603
- Ranjith R, Kumar SNV, Giridharan PK, et al. CHARACTERIZATION of TRIBOLOGICAL and MECHANICAL PROPERTIES of AA7050/Al 2 O 3 COMPOSITES at ELEVATED TEMPERATURE. High Temp Mater Processes: Int Q High-Technol Plasma Processes. 2021;25(4):39–50. doi: 10.1615/HighTempMatProc.2021040983
- Ravindran P, Mohamed MJS, Gnanaraj SJP, et al. Effect of graphite addition on dry sliding wear behavior of self-lubricating al-SiC-Gr hybrid composites by PM process. Mater Today Proc. 2022;60:783–787. doi: 10.1016/j.matpr.2021.09.198
- Ul Haq MI, Anand A. Dry sliding friction and wear behavior of AA7075-Si3N4 composite. Silicon. 2018;10(5):1819–1829. doi: 10.1007/s12633-017-9675-1
- Ranjith R, Giridharan PK. Experimental investigation of surface hardness and dry sliding wear behavior of AA7050/B 4 C. High Temp Mater Processes: Int Q High-Technol Plasma Processes. 2015;19(3–4):291–305. doi: 10.1615/HighTempMatProc.2016016824
- Banoriya D, Purohit R, Dwivedi RK. Wear performance of titanium reinforced biocompatible TPU. Adv Mater Process Technol. 2020;6(2):284–291. doi: 10.1080/2374068X.2020.1731232
- Kumar R, Dwivedi RK, Ahmed S, et al. Wear behaviour analysis of medium carbon high silicon alloy steel at different process parameter. Adv Mater Process Technol. 2020;6(2):292–300. doi: 10.1080/2374068X.2020.1731231
- Ranjith R, Giridharan PK. Influence of high temperature on surface hardness of AA7050 hybrid composites. J Mater Environ Sci. 2017;8:1168–1172.
- Kumar A, Rana RS, Purohit R. Effect of stirrer design on microstructure of MWCNT and al alloy by stir casting process. Adv Mater Process Technol. 2020;6(2):320–327. doi: 10.1080/2374068X.2020.1731156
- Ranjith R, Karthick B, Kavi MS, et al. Impact of various reinforcement particles on the density of AA7050 graded aluminium fabricated through stir casting. Mater Today Proc. 2020;26:1465–1468. doi: 10.1016/j.matpr.2020.02.301
- Rajeshkumar G. Effect of sodium hydroxide treatment on dry sliding wear behavior of Phoenix sp. fiber reinforced polymer composites. J Ind Text. 2022;51(2_suppl):2819S–2834S. doi: 10.1177/1528083720918948
- Ranjith R, Pradeep VP, Kumar BS, et al. Investigation on mechanical and tribological properties of AA6061/Gr composites for solar header pipes. Eng Res Exp. 2022;4(2):025018. doi: 10.1088/2631-8695/ac6b19
- Alidokht SA, Yue S, Chromik RR. Effect of WC morphology on dry sliding wear behavior of cold-sprayed Ni-WC composite coatings. Surf Coat Technol. 2019;357:849–863. doi: 10.1016/j.surfcoat.2018.10.082
- Chen X, Ran L, Liu Q, et al. Hand hygiene, mask-wearing behaviors and its associated factors during the COVID-19 epidemic: a cross-sectional study among primary school students in Wuhan, China. Int J Environ Res Public Health. 2020;17(8):2893. doi: 10.3390/ijerph17082893
- Ranjith R, Vivekanandan P, Vishnu A. Sulphide stress corrosion cracking of AA7050 hybrid composites. J Indian Chem Soc. 2020;97:783–785.
- Wu Z, Tang P, Wu Y, et al. Wear behavior of AlCrSiVN coatings at elevated temperature up to 700° C. Vacuum. 2019;169:108876. doi: 10.1016/j.vacuum.2019.108876
- Deng C, Zhang X, Wang D, et al. Preparation and characterization of carbon nanotubes/aluminum matrix composites. Mater Lett. 2007;61(8–9):1725–1728. doi: 10.1016/j.matlet.2006.07.119
- Xu R, Tan Z, Fan G, et al. High-strength CNT/Al-Zn-Mg-Cu composites with improved ductility achieved by flake powder metallurgy via elemental alloying. Compos Part A Appl Sci Manuf. 2018;111:1–11. doi: 10.1016/j.compositesa.2018.05.012
- Padmavathi KR, Ramakrishnan R. Tribological behaviour of aluminium hybrid metal matrix composite. Procedia Eng. 2014;97:660–667. doi: 10.1016/j.proeng.2014.12.295
- Kök M, Özdin K. Wear resistance of aluminium alloy and its composites reinforced by Al2O3 particles. J Mater Process Technol. 2007;183(2–3):301–309. doi: 10.1016/j.jmatprotec.2006.10.021
- Singla D, Amulya K, Murtaza Q. CNT reinforced aluminium matrix composite-a review. Mater Today Proc. 2015;2(4–5):2886–2895. doi: 10.1016/j.matpr.2015.07.248
- Canakci A, Varol T. Microstructure and properties of AA7075/Al–SiC composites fabricated using powder metallurgy and hot pressing. Powder Technol. 2014;268:72–79. doi: 10.1016/j.powtec.2014.08.016
- Bamane O, Patil S, Agarwal L, et al. Fabrication and characterization of AA7075 metal matrix composite reinforced with MWCNT. Mater Today Proc. 2018;5(2):8001–8007. doi: 10.1016/j.matpr.2017.11.484
- Archard J. Contact and rubbing of flat surfaces. J Appl Phys. 1953;24(8):981–988. doi: 10.1063/1.1721448