Machinability of Inconel 718 using unitary and hybrid nanofluids under minimum quantity lubrication

References

• Shafiq A, Çolak AB, Sindhu TN. Significance of EMHD graphene oxide (GO) water ethylene glycol nanofluid flow in a darcy–forchheimer medium by machine learning algorithm. Eur Phys J Plus. 2023;138(3):213. doi: 10.1140/epjp/s13360-023-03798-5
   Web of Science ®Google Scholar
• Shafiq A, Çolak AB, Sindhu TN. Construction of neural network based intelligent computing for treatment of Darcy-forchheimer sisko nanofluid flow with rosseland’s radiative process. Heat Trans Res. 2023;54(9):77–98. doi: 10.1615/HeatTransRes.2023046617
   Web of Science ®Google Scholar
• Chinchanikar S, Kore SS, Hujare P. A review on nanofluids in minimum quantity lubrication machining. J Manuf Processes. 2021;68:56–70. doi: 10.1016/j.jmapro.2021.05.028
   Web of Science ®Google Scholar
• Kishore PS, Sireesha V. Preparation, characterization and thermo-physical properties of Cu-graphene nanoplatelets hybrid nanofluids. Mater Today Proc. 2020;27(1):610–614. doi: 10.1016/j.matpr.2019.12.108
   Google Scholar
• Rudyak VY, Minakov AV, Pryazhnikov MI. Preparation, characterization, and viscosity studding the single-walled carbon nanotube nanofluids. J Mol Liq. 2021;329:115517. doi: 10.1016/j.molliq.2021.115517
   Web of Science ®Google Scholar
• Sandhya M, Ramasamy D, Sudhakar K, et al. A systematic review on graphene-based nanofluids application in renewable energy systems: preparation, characterization, and thermophysical properties. Sustainable Energy Technol Assess. 2021;44:101058. doi: 10.1016/j.seta.2021.101058
   Web of Science ®Google Scholar
• Asadi A, Alarifi IM, Foong LK. An experimental study on characterization, stability and dynamic viscosity of CuO-TiO2/water hybrid nanofluid. J Mol Liq. 2020;307:112987. doi: 10.1016/j.molliq.2020.112987
   Web of Science ®Google Scholar
• Singh R, Sah NK, Sharma V. Development and characterization of unitary and hybrid Al2O3 and ZrO dispersed Jatropha oil-based nanofluid for cleaner production. J Clean Prod. 2021;317:128365. doi: 10.1016/j.jclepro.2021.128365
   Web of Science ®Google Scholar
• Hameed A, Mukhtar A, Shafiq U, et al. Experimental investigation on synthesis, characterization, stability, thermo-physical properties and rheological behavior of MWCNTs-kapok seed oil based nanofluid. J Mol Liq. 2019;277:812–824. doi: 10.1016/j.molliq.2019.01.012
   Web of Science ®Google Scholar
• Kumar DD, Arasu AV. A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids. Renew Sust Energ Rev. 2018;81:1669–1689. doi: 10.1016/j.rser.2017.05.257
   Web of Science ®Google Scholar
• Şirin Ş, Sarıkaya M, Yıldırım ÇV, et al. Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL. Tribol Int. 2021;153:106673. doi: 10.1016/j.triboint.2020.106673
   Web of Science ®Google Scholar
• Faheem A, Husain T, Hasan F, et al. Effect of nanoparticles in cutting fluid for structural machining of inconel 718. Adv Mater Process Technol. 2022;8(1):259–76. doi: 10.1080/2374068X.2020.1802563
   Google Scholar
• Şirin E, Kıvak T, Yıldırım ÇV. Effects of mono/hybrid nanofluid strategies and surfactants on machining performance in the drilling of hastelloy X. Tribol Int. 2021;157:106894. doi: 10.1016/j.triboint.2021.106894
   Web of Science ®Google Scholar
• Wang Y, Li C, Zhang Y, et al. Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids. Tribol Int. 2016;99:198–210. doi: 10.1016/j.triboint.2016.03.023
   Web of Science ®Google Scholar
• Li B, Li C, Zhang Y, et al. Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil. J Clean Prod. 2017;154:1–11. doi: 10.1016/j.jclepro.2017.03.213
   Web of Science ®Google Scholar
• Wang Y, Li C, Zhang Y, et al. Processing characteristics of vegetable oil-based nanofluid MQL for grinding different workpiece materials. Int J Precis Eng Manuf-Green Tech. 2018;5(2):327–339. doi: 10.1007/s40684-018-0035-4
   Web of Science ®Google Scholar
• Venkatesan K, Mathew AT, Devendiran S, et al. Machinability study and multi-response optimization of cutting force, surface roughness and tool wear on CNC turned inconel 617 superalloy using Al2O3 nanofluids in coconut oil. Procedia Manuf. 2019;30:396–403. doi: 10.1016/j.promfg.2019.02.055
   Google Scholar
• Venkatesan K, Devendiran S, Ghazaly NM. Application of Taguchi-Response surface analysis to optimize the cutting parameters on turning of Inconel X-750 using Nanofluids suspended Al2O3 in coconut oil. Procedia Manuf. 2019;30:90–97. doi: 10.1016/j.promfg.2019.02.014
   Google Scholar
• Ali MA, Azmi AI, Murad MN, et al. Roles of new bio-based nanolubricants towards eco-friendly and improved machinability of inconel 718 alloys. Tribol Int. 2020;144:106106. doi: 10.1016/j.triboint.2019.106106
   Web of Science ®Google Scholar
• Makhesana MA, Patel KM. Performance assessment of vegetable oil-based nanofluid in minimum quantity lubrication (MQL) during machining of inconel 718. Adv Mater Process Technol. 2022;8(3):3182–3198. doi: 10.1080/2374068X.2021.1945305
   Google Scholar
• Sharma VK, Singh T, Singh K, et al. Influence of hybrid nanofluid on tool wear and surface roughness in MQL-assisted face milling of AISI 52100. Adv Mater Process Technol. 2023;2023:1–12. doi:10.1080/2374068X.2023.2179291
   Google Scholar
• Shafiq A, Çolak AB, Sindhu TN. Significance of bioconvective flow of MHD thixotropic nanofluid passing through a vertical surface by machine learning algorithm. Chin J Phys. 2022;80:427–444. doi: 10.1016/j.cjph.2022.08.008
   Web of Science ®Google Scholar
• Shafiq A, Çolak AB, Sindhu TN. Modeling of Soret and Dufour’s convective heat transfer in nanofluid flow through a moving needle with artificial neural network. Arab J Sci Eng. 2023;48(3):2807–2820. doi: 10.1007/s13369-022-06945-9
   Web of Science ®Google Scholar
• Singh T, Dureja JS, Dogra M, et al. Environment friendly machining of inconel 625 under nano-fluid minimum quantity lubrication (NMQL). Int J Precis Eng Manuf. 2018;19(11):1689–1697. doi: 10.1007/s12541-018-0196-7
   Web of Science ®Google Scholar
• Amrita M, Kamesh B. Optimization of graphene based minimum quantity lubrication of Inconel718 turning with multiple machining performances. Mater Today Proc. 2021;39:1337–1344. doi: 10.1016/j.matpr.2020.04.568
   Google Scholar
• Li B, Li C, Zhang Y, et al. Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy. Int J Adv Manuf Technol. 2017;89(9–12):3459–3474. doi: 10.1007/s00170-016-9324-7
   Web of Science ®Google Scholar
• Armarego EJ, Brown RH. The machining of metals. New Jersy: Prentice-Hall Inc; 1969.
   Google Scholar
• Stabler GV. The chip flow law and its consequences. Adv Mach Tool Des Res. 1964;5:243–251.
   Google Scholar
• Chandrasekar M, Suresh S, Senthilkumar T. Mechanisms proposed through experimental investigations on thermophysical properties and forced convective heat transfer characteristics of various nanofluids–A review. Renew Sust Energ Rev. 2012;16(6):3917–3938. doi: 10.1016/j.rser.2012.03.013
   Web of Science ®Google Scholar
• Huang J, Wang X, Long Q, et al. Influence of pH on the stability characteristics of nanofluids. In 2009 Symposium on Photonics and Optoelectronics; 2009 Aug 14; Wuhan, China. IEEE. (p. 1–4).
   Google Scholar
• Pawade RS, Joshi SS. Mechanism of chip formation in high-speed turning of inconel 718. Mach Sci Technol. 2011;15(1):132–152. doi: 10.1080/10910344.2011.557974
   Web of Science ®Google Scholar
• Sarkar S, Datta S. Machining performance of inconel 718 under dry, MQL, and nanofluid MQL conditions: application of coconut oil (base fluid) and multi-walled carbon nanotubes as additives. Arab J Sci Eng. 2021;46(3):2371–2395. doi: 10.1007/s13369-020-05058-5
   Web of Science ®Google Scholar
• Hegab H, Salem A, Rahnamayan S, et al. Analysis, modeling, and multi-objective optimization of machining inconel 718 with nano-additives based minimum quantity coolant. Appl Soft Comput. 2021;108:107416. doi: 10.1016/j.asoc.2021.107416
   Web of Science ®Google Scholar
• Makhesana MA, Patel KM. Optimization of parameters and sustainability assessment under minimum quantity solid lubrication-assisted machining of inconel 718. Process Integ Optim Sustain. 2021;5(3):625–644. doi: 10.1007/s41660-021-00171-w
   Google Scholar
• Abbasi SA, Pingfa F Evaluating the effectiveness of various coating layers applied on k-grade cemented carbide cutting tools on machinability of titanium alloy Ti-6Al-4V in high speed end milling. In 2015 12th International Bhurban Conference on Applied Sciences and Technology (IBCAST); 2015 Jan 13; Islamabad, Pakistan. IEEE. (p. 14–19).
   Google Scholar
• Jawahir IS, Van Luttervelt CA. Recent developments in chip control research and applications. CIRP Ann. 1993;42(2):659–693. doi: 10.1016/S0007-8506(07)62531-1
   Google Scholar
• Rakesh M, Datta S. Machining of inconel 718 using coated WC tool: effects of cutting speed on chip morphology and mechanisms of tool wear. Arab J Sci Eng. 2020;45(2):797–816. doi: 10.1007/s13369-019-04171-4
   Web of Science ®Google Scholar