The influence of hatch distance on the surface roughness, microhardness, residual stress, and density of inconel 625 specimens in the laser powder bed fusion process

References

• Keles O, Abdelmagid G, Adesina A, et al. Additive manufacturing of layer of Ti6Al4V alloy: morphology and metallurgical properties. Adv Mater Process Technol. 2020;8(1):875–883. doi: 10.1080/2374068X.2020.1835009
   Google Scholar
• Melzer D, Džugan J, Koukolíková M, et al. Fracture characterisation of vertically build functionally graded 316L stainless steel with inconel 718 deposited by directed energy deposition process. Virtual Phys Prototyping. 2022;17(4):821–840. doi: 10.1080/17452759.2022.2073793
   Web of Science ®Google Scholar
• Novotný L, Béreš M, de Abreu HFG, et al. Thermal analysis and phase transformation behaviour during additive manufacturing of Ti–6Al–4V alloy. Mater Sci Technol. 2019;35(7):846–855. doi: 10.1080/02670836.2019.1593669
   Web of Science ®Google Scholar
• Kumar D, Kumar A, Faisal N, et al. Application of 3D printing technology for medical implants: a state-of-the-art review. Adv Mater Process Technol. 2023;1–16. doi: 10.1080/2374068X.2023.2193788
   Google Scholar
• Marchese G, Lorusso M, Parizia S, et al. Influence of heat treatments on microstructure evolution and mechanical properties of inconel 625 processed by laser powder bed fusion. Mater Sci Eng A. 2018;729:64–75. doi: 10.1016/j.msea.2018.05.044
   Web of Science ®Google Scholar
• ISO/ASTM. 52900. ‘Additive manufacturing – general principles – terminology’, 52900:2015(E). Philadelphia, PA, USA: ASTM; 2015.
   Google Scholar
• Pandey A, Awasthi A, Saxena KK. Metallic implants with properties and latest production techniques: a review. Adv Mater Process Technol. 2020;6(2):405–440. doi: 10.1080/2374068X.2020.1731236
   Google Scholar
• Islam M, Purtonen T, Piili H, et al. Temperature profile and imaging analysis of laser additive manufacturing of stainless steel. Phys Procedia. 2013;41:835–842. doi: 10.1016/j.phpro.2013.03.156
   Google Scholar
• Nagarajan B, Hu Z, Song X, et al. Development of micro selective laser melting: the state of the art and future perspectives. Eng. 2019;5:702–720. doi: 10.1016/j.eng.2019.07.002
   Google Scholar
• Paul CP, Ganesh P, Mishra SK, et al. Investigating laser rapid manufacturing for inconel-625 components. Opt Laser Technol. 2007;39(4):800–805. doi: 10.1016/j.optlastec.2006.01.008
   Web of Science ®Google Scholar
• Ezugwu E, Wang Z, Machado A. The machinability of nickel-based alloys: a review. J Mater Process Technol. 1999;86(1–3):1–16. doi: 10.1016/S0924-0136(98)00314-8
   Web of Science ®Google Scholar
• Nath C, Brooks Z, Kurfess TR. On machinability study and process optimization in face milling of some alloys with indexable copy face mill inserts. Procedia Manuf. 2015;1:487–500. doi: 10.1016/j.promfg.2015.09.008
   Google Scholar
• Mumtaz K, Hopkinson N. Top surface and side roughness of inconel 625 parts processed using selective laser melting. Rapid Prototyping J. 2009;15(2):96–103. doi: 10.1108/13552540910943397
   Web of Science ®Google Scholar
• Kruth J-P, Deckers J, Yasa E, et al. Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method. Proc Inst Mech Eng Part B J Eng Manuf. 2012;226(6):980–991. doi: 10.1177/0954405412437085
   Web of Science ®Google Scholar
• Wu A, Brown D, Kumar M, et al. An experimental investigation into additive manufacturing-induced residual stresses in 316l stainless steel. Metall Mater Trans A. 2014;45(13):6260–6270. doi: 10.1007/s11661-014-2549-x
   Web of Science ®Google Scholar
• Sateesh NH, Kumar GCM, Prasad K, et al. Microstructure and mechanical characterization of laser sintered inconel-625 superalloy, Procedia Mater. Sci. 2014;5:772–779. doi: 10.1016/j.mspro.2014.07.327
   Google Scholar
• Lu Y, Wu S, Gan Y, et al. Study on the microstructure, mechanical property and residual stress of SLM inconel-718 alloy manufactured by differing island scanning strategy. Vol. 75, United Kingdom: Optics & Laser Technology; 2015. p. 197–206 doi: 10.1016/j.optlastec.2015.07.009
   Google Scholar
• Yadroitsev I, Yadroitsava I. Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting. Virtual Phys Prototyping. 2015;10(2):67–76. doi: 10.1080/17452759.2015.1026045
   Web of Science ®Google Scholar
• Carter LN, Wang X, Read N, et al. Process optimisation of selective laser melting using energy density model for nickel based superalloys. Mater Sci Technol. 2016;32:657–661. doi: 10.1179/1743284715Y.0000000108
   Web of Science ®Google Scholar
• Marchese G, Colera XG, Calignano F, et al. Characterization and comparison of inconel 625 processed by selective laser melting and laser metal deposition. Adv Eng Mater. 2017;19(3):1–9. doi: 10.1002/adem.201600635
   Web of Science ®Google Scholar
• Balbaa MA, Elbestawi MA, Mclsaac J. An experimental investigation of surface integrity in selective laser melting of inconel 625. Int J Adv Manuf Technol. 2019;104(9–12):3511–3529. doi: 10.1007/s00170-019-03949-y
   Web of Science ®Google Scholar
• Staub A, Spierings AB, Wegener K. Correlation of meltpool characteristics and residual stresses at high laser intensity for metal lpbf process. Adv Mater Process Technol. 2019;5(1):153–161. doi: 10.1080/2374068X.2018.1535643
   Google Scholar
• Yan X, Gao S, Chang C, et al. Effect of building directions on the surface roughness, microstructure, and tribological properties of selective laser melted inconel 625. J Mater Process Technol. 2021;288:116878. doi: 10.1016/j.jmatprotec.2020.116878
   Web of Science ®Google Scholar
• Zhang J, Li S, Wei Q, et al. Cracking behavior and inhibiting process of inconel 625 alloy formed by selective laser melting. Chin J Rare Met. 2015;39:961–966. doi: 10.13373/j.cnki.cjrm.2015.11.001
   Google Scholar
• Sochalski-Kolbus LM, Payzant EA, Cornwell PA, et al. Comparison of residual stresses in inconel 718 simple parts made by electron beam melting and direct laser metal sintering. Metall Mater Trans A. 2015;46(3):1419–1432. doi: 10.1007/s11661-014-2722-2
   Web of Science ®Google Scholar
• Pleass C, Jothi S. Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of inconel 625 fabricated by selective laser melting. Addit Manuf. 2018;24:419–431. doi: 10.1016/j.addma.2018.09.023
   Web of Science ®Google Scholar
• Spierings A, Schneider M, Eggenberger R. Comparison of density measurement techniques for additive manufactured metallic parts. Rapid Prototyping J. 2011;17(5):380–386. doi: 10.1108/13552541111156504
   Web of Science ®Google Scholar
• Koutiri I, Pessard E, Peyre P, et al. Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built inconel 625 parts J. Mater Process Technol. 2018;255:536–546. doi: 10.1016/j.jmatprotec.2017.12.043
   Web of Science ®Google Scholar
• Zhang B, Bi G, Nai S, et al. Microhardness and microstructure evolution of TiB2 reinforced inconel 625/TiB2 composite produced by selective laser melting. Opt Laser Technol. 2016;80:186–195. doi: 10.1016/j.optlastec.2016.01.010
   Web of Science ®Google Scholar
• Liu FC, Lin X, Yang GL, et al. Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy. Opt Laser Technol. 2011;43(1):208–213. doi: 10.1016/j.optlastec.2010.06.015
   Web of Science ®Google Scholar