Optimisation of injection process parameters to minimise mould deflection: design of experiment

References

• Carpenter B, Patil S, Hoffman R, et al. Effect of machine compliance on mold deflection during injection and packing of thermoplastic parts. Polym Eng Sci. 2006;46(7):844–852. doi: 10.1002/pen.20527
   Web of Science ®Google Scholar
• Mahshid R, Zhang Y, Hansen HN, et al. Effect of mold compliance on dimensional variations of precision molded components in multi-cavity injection molding. J Manuf Processes. 2021;67:12–22. doi: 10.1016/j.jmapro.2021.04.048
   Web of Science ®Google Scholar
• Costa FS. The influence of mold deflection on the prediction of packing pressure decay and part shrinkage. In AIP Conference Proceedings. Nuremberg, Germany: American Institute of Physics; 2014. p. 565–570.
   Google Scholar
• Kwon YI, Lim E, Song YS. Simulation of injection-compression molding for thin and large battery housing. Curr Appl Phys. 2018;18(11):1451–1457. doi: 10.1016/j.cap.2018.08.017
   Web of Science ®Google Scholar
• Leo V, Ch C. The effect of the packing parameters, gate geometry, and mold elasticity on the final dimensions of a molded part. Polym Eng Sci. 1996;36(15):1961–1971. doi: 10.1002/pen.10592
   Web of Science ®Google Scholar
• Delaunay D, Le Bot P, Fulchiron R, et al. Nature of contact between polymer and mold in injection molding. Part II: influence of mold deflection on pressure history and shrinkage. Polym Eng Sci. 2000;40(7):1692–1700. doi: 10.1002/pen.11301
   Web of Science ®Google Scholar
• RJC. 2022. Understand the cost of injection molding. In: RJC Mold. [cited 2023 Sep 25]. Available from: https://rjcmold.com/understand-the-cost-of-injection-molding/
   Google Scholar
• Plastics R. 2013. How much does injection molding cost? | rex plastics mold manufacturer. In: Rex Plastics. [cited 2023 Sep 25]. Available from: https://rexplastics.com/plastic-injection-molds/how-much-do-plastic-injection-molds-cost
   Google Scholar
• Costa FS, Yuan Z. Mold deflection effects on the prediction of packing pressure decay and shrinkage of semi-crystalline polymers. In AIP Conference Proceedings. AIP Publishing; 2015.
   Google Scholar
• Mold deflection causing problems with your injection molding process? Read this. [cited 2022 Jun 15]. Available from: https://shibaura-machine.com/articles/im-2021-9-9-mold-deflection-causing-problems-with-your-injection-molding-process-read-this/
   Google Scholar
• Huang C-C, Truong T-C, Chen S-H. An effective approach to measuring real-time mold deflection during injection molding. J Polym Eng. 2011;31(8–9):549–560. doi: 10.1515/POLYENG.2011.097
   Web of Science ®Google Scholar
• HamaSalih HA, Abdalrahman RM, Rostam S. Optimizing the blending ratio and processing parameters for ternary blends of recycled polypropylene with recycled high and virgin linear low-densities polyethylene. Results In Eng. 2023;18:101171. doi: 10.1016/j.rineng.2023.101171
   Google Scholar
• Hentati F, Hadriche I, Masmoudi N, et al. Optimization of the injection molding process for the PC/ABS parts by integrating Taguchi approach and CAE simulation. Int J Adv Manuf Technol. 2019;104(9–12):4353–4363. doi: 10.1007/s00170-019-04283-z
   Web of Science ®Google Scholar
• Bensingh RJ, Machavaram R, Boopathy SR, et al. Injection molding process optimization of a bi-aspheric lens using hybrid artificial neural networks (ANNs) and particle swarm optimization (PSO). Measurement. 2019;134:359–374. doi: 10.1016/j.measurement.2018.10.066
   Web of Science ®Google Scholar
• Chen Y-C, Liao Y-J, Tseng S-C, et al. Core deflection in plastics injection molding: direct measurement, flow visualization and 3D simulation. Polym-Plast Technol Eng. 2011;50(9):863–872. doi: 10.1080/03602559.2010.551386
   Web of Science ®Google Scholar
• Techawinyutham L, Techawinyutham W, Laohapanich C, et al. Possibility of infrared (IR) thermography camera to investigate properties of injected plastic product and optimisation injection process parameter using a design of experiment. Adv Mater Process Technol. 2023;1–22. doi: 10.1080/2374068X.2023.2193452
   Google Scholar
• Ghosh N, Pal PK, Nandi G. Investigation on dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using grey based Taguchi method. Adv Mater Process Technol. 2018;4(3):385–401. doi: 10.1080/2374068X.2018.1451182
   Google Scholar
• Challa B, Srinivasa Rao S, Manne P, et al. Experimental investigation and optimisation of α–β brass at elevated temperatures using Taguchi approach. Adv Mater Process Technol. 2022;8(sup2):537–548. doi: 10.1080/2374068X.2021.1945310
   Google Scholar
• Chen J-Y, Liu C-Y, Huang M-S. Tie-bar elongation based filling-to-packing switchover control and prediction of injection molding quality. Polymers. 2019;11(7):1168. doi: 10.3390/polym11071168
   PubMed Web of Science ®Google Scholar
• Mawardi I, Jannifar A, Lubis H. Effect of injection temperature on defect plastic products. IOP Conf Ser Mater Sci Eng. 2019;536(1):012102. doi: 10.1088/1757-899X/536/1/012102
   Google Scholar
• Chen J-Y, Yang K-J, Huang M-S. Online quality monitoring of molten resin in injection molding. Int J Heat & Mass Trans. 2018;122:681–693. doi: 10.1016/j.ijheatmasstransfer.2018.02.019
   Web of Science ®Google Scholar
• Bensingh RJ, Boopathy SR, Jebaraj C. Minimization of variation in volumetric shrinkage and deflection on injection molding of Bi-aspheric lens using numerical simulation. J Mech Sci Technol. 2016;30(11):5143–5152. doi: 10.1007/s12206-016-1032-6
   Web of Science ®Google Scholar
• Li D, Zhou H, Zhao P, et al. A real-time process optimization system for injection molding. Polym Eng Sci. 2009;49(10):2031–2040. doi: 10.1002/pen.21444
   Web of Science ®Google Scholar
• Moayyedian M, Abhary K, Marian R. The analysis of defects prediction in injection molding. Int J Mech Mechatron Eng. 2016;10:1883–1886.
   Google Scholar
• Chen S-C, Lin Y-W, Chien R-D, et al. Variable mold temperature to improve surface quality of microcellular injection molded parts using induction heating technology. Adv Polym Technol. 2008;27(4):224–232. doi: 10.1002/adv.20133
   Web of Science ®Google Scholar
• Mahajan LD, Ulhe PN. Analysis Of injection molding process to reduced defects (Short-Shot). Int J Eng Technol Manage Res. 2018;5(6):113–119. doi: 10.5281/ZENODO.1313112
   Google Scholar
• Moayyedian M, Abhary K, Marian R. Gate design and filling process analysis of the cavity in injection molding process. Adv Manuf. 2016;4(2):123–133. doi: 10.1007/s40436-016-0138-5
   Web of Science ®Google Scholar