Tribological study of magnesium-based AZ91/TiC/rGO hybrid composite prepared by powder metallurgy route: an experimental and analytical approach

References

• Bharathi P, Sampath Kumar T. Latest research and developments of ceramic reinforced magnesium matrix composites—a comprehensive review. Proc Inst Mech Eng Part E J Process Mech Eng. 2023;237(3):1014–1035. doi: 10.1177/09544089221126044
   Web of Science ®Google Scholar
• Niraj N, Pandey KM, Dey A. Tribological behaviour of magnesium metal matrix composites reinforced with fly ash cenosphere. Mater Today Proc. 2018;5(9):20138–20144. doi: 10.1016/j.matpr.2018.06.382
   Google Scholar
• Jayasathyakawin S, Ravichandran M, Ismail SO, et al. Effects of hydroxyapatite addition on the microstructure and mechanical properties of sintered magnesium matrix composites. Mater Today Commun. 2023;35:105582. doi: 10.1016/j.mtcomm.2023.105582
   Google Scholar
• Selvakumar N, Narayanasamy P. Optimization and effect of weight fraction of MoS2 on the tribological behavior of Mg-TiC-MoS2 hybrid composites. Tribol Trans. 2016;59(4):733–747. doi: 10.1080/10402004.2015.1110866
   Web of Science ®Google Scholar
• Aydin M, Findik F. Wear properties of magnesium matrix composites reinforced with SiO2 particles. Ind Lubr Tribol. 2010;62(4):232–237. doi: 10.1108/00368791011051099
   Web of Science ®Google Scholar
• Gopal PM, Soorya Prakash K, Nagaraja S, et al. Effect of weight fraction and particle size of CRT glass on the tribological behaviour of Mg-CRT-BN hybrid composites. Tribol Int. 2017;116:338–350. doi: 10.1016/j.triboint.2017.07.025
   Web of Science ®Google Scholar
• Suneesh E, Sivapragash M. Comprehensive studies on processing and characterization of hybrid magnesium composites. Mater Manuf Process. 2018;33(12):1324–1345. doi: 10.1080/10426914.2018.1453155
   Web of Science ®Google Scholar
• Banerjee S, Poria S, Sutradhar G, et al. Dry sliding tribological behavior of AZ31-WC nano-composites. J Magnes Alloy. 2019;7(2):315–327. doi: 10.1016/j.jma.2018.11.005
   Web of Science ®Google Scholar
• Katiyar JK, Hammad JA, Mohammed AS. Tribological Properties of light metal matrix composites. Encycl Mater Compos. 2021;1(1):389–401.
   Google Scholar
• Kumar D, Jain J, Gosvami NN. Macroscale to nanoscale tribology of magnesium-based alloys: a review. Tribol Lett. 2022;70(1):1–29. doi: 10.1007/s11249-022-01568-5
   Web of Science ®Google Scholar
• Banerjee S, Sahoo P, Davim JP. Tribological characterisation of magnesium matrix nanocomposites: a review. Adv Mech Eng. 2021;13(4):1–39. doi: 10.1177/16878140211009025
   Web of Science ®Google Scholar
• Banijamali SM, Najafi S, Sheikhani A, et al. Dry tribological behavior of hot-rolled WE43 magnesium matrix composites reinforced by B4C particles. Wear. 2022;508-509:204487–204509. doi: 10.1016/j.wear.2022.204487
   Google Scholar
• Kavimani V, Prakash KS, Thankachan T. Experimental investigations on wear and friction behaviour of SiC@r-GO reinforced Mg matrix composites produced through solvent-based powder metallurgy. Compos Part B Eng. 2019;162:508–521. doi: 10.1016/j.compositesb.2019.01.009
   Web of Science ®Google Scholar
• Bajakke PA, Malik VR, Deshpande AS. Particulate metal matrix composites and their fabrication via friction stir processing–a review. Mater Manuf Process. 2019;34(8):833–881. doi: 10.1080/10426914.2019.1605181
   Web of Science ®Google Scholar
• Aravindan S, Rao PV, Ponappa K. Evaluation of physical and mechanical properties of AZ91D/SiC composites by two step stir casting process. J Magnes Alloy. 2015;3(1):52–62. doi: 10.1016/j.jma.2014.12.008
   Web of Science ®Google Scholar
• Falcon-Franco L, Bedolla-Becerril E, Lemus-Ruiz J, et al. Wear performance of TiC as reinforcement of a magnesium alloy matrix composite. Compos Part B Eng. 2011;42(2):275–279. doi: 10.1016/j.compositesb.2010.11.012
   Web of Science ®Google Scholar
• Sankar C, Gangatharan K, Christopher Ezhil Singh S, et al. Optimization on tribological behaviour of milled nano-B 4 C particles reinforced with AZ91 alloy through powder metallurgy method. Trans Indian Inst Met. 2019;72(5):1255–1275. doi: 10.1007/s12666-019-01618-y
   Web of Science ®Google Scholar
• Soorya Prakash K, Balasundar P, Nagaraja S, et al. Mechanical and wear behaviour of Mg–SiC–Gr hybrid composites. J Magnes Alloy. 2016;4(3):197–206. doi: 10.1016/j.jma.2016.08.001
   Web of Science ®Google Scholar
• Dash D, Singh R, Samanta S, et al. Influence of TiC on microstructure, mechanical and wear properties of magnesium alloy (AZ91D) matrix composites. J Sci Ind Res (Ind). 2020;79(2):164–169.
   Web of Science ®Google Scholar
• Ma G, Xiao H, Ye J, et al. Research status and development of magnesium matrix composites. Mater Sci Technol. 2020;36(6):645–653. doi: 10.1080/02670836.2020.1732610
   Web of Science ®Google Scholar
• Kumar A, Kumar S, Mukhopadhyay NK, et al. Effect of TiC reinforcement on mechanical and wear properties of AZ91 matrix composites. Int J Met. 2022;16(4):2128–2143. doi: 10.1007/s40962-021-00747-9
   Google Scholar
• Mehra D, Mahapatra MM, Harsha SP. Processing of RZ5-10wt%TiC in-situ magnesium matrix composite. J Magnes Alloy. 2018;6(1):100–105. doi: 10.1016/j.jma.2018.01.002
   Web of Science ®Google Scholar
• Kavimani V, Soorya Prakash K, Arun Pandian M. Influence of r-GO addition on enhancement of corrosion and wear behavior of AZ31 MMC. Appl Phys A: Mater Sci Process. 2017 Aug 1;123(8). doi: 10.1007/s00339-017-1118-8
   Web of Science ®Google Scholar
• Singh L, Singh B, Saxena KK. Manufacturing techniques for metal matrix composites (MMC): an overview. Adv Mater Process Technol. 2020;6(2):224–240. doi: 10.1080/2374068X.2020.1729603
   Google Scholar
• Ravichandran M, Veerappan G, Dhinakaran V, et al. Optimization of tribo-mechanical properties of boron carbide reinforced magnesium metal matrix composite. Proc Inst Mech Eng Part J J Eng Tribol. 2022;236(9):1814–1826. doi: 10.1177/13506501211030070
   Web of Science ®Google Scholar
• Venkat Prasat S, Subramanian R, Radhika N, et al. Dry sliding wear and friction studies on AlSi10Mg-fly ash-graphite hybrid metal matrix composites using Taguchi method. Tribol - Mater Surface Interface. 2011;5(2):72–81. doi: 10.1179/1751584X11Y.0000000009
   Google Scholar
• Radhika N, Subramanian R, Prasat SV. Tribological behaviour of Aluminium/Alumina/Graphite hybrid metal matrix composite using Taguchi’s techniques. J Miner Mater Charact Eng. 2011;10(5):427–443. doi: 10.4236/jmmce.2011.105032
   Google Scholar
• Kumar J, Negi S. Dry sliding wear behavior of additively manufactured cenosphere-filled PETG syntactic foam composites. Aircr Eng Aerosp Technol. 2023;95(10):1570–1577. doi: 10.1108/AEAT-03-2023-0087
   Web of Science ®Google Scholar
• Venkatesh R, Kannan CR, Manivannan S, et al. Synthesis and experimental investigations of tribological and corrosion performance of AZ61 magnesium alloy hybrid composites. J Nanomater. 2022;2022:Article ID 6012518/1–12. doi: 10.1155/2022/6012518
   Web of Science ®Google Scholar
• Manikandan R, Arjunan TV, Nath OPAR. Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al 7075) hybrid metal matrix composite. Composites. 2020;183:107668. doi: 10.1016/j.compositesb.2019.107668
   Google Scholar
• Gupta MK, Sood PK, Sharma VS. Machining parameters optimization of titanium alloy using response surface methodology and particle swarm optimization under minimum-quantity lubrication environment. Mater Manuf Process. 2016;31(13):1671–1682. doi: 10.1080/10426914.2015.1117632
   Web of Science ®Google Scholar
• Sivaiah P, Chakradhar D. Modeling and optimization of sustainable manufacturing process in machining of 17-4 PH stainless steel. Meas J Int Meas Confed. 2019;134:142–152. doi: 10.1016/j.measurement.2018.10.067
   Web of Science ®Google Scholar