References
- Adamson, A. W., and A. Gast. 1997. Physical chemistry of surfaces. 6th ed. New York: Wiley-Interscience.
- Agency IE. 2018. The future of cooling: Opportunities for energy-efficient air conditioning.
- Ahmed, M. H., N. M. Kattab, and M. Fouad. 2005. Evaluation and optimization of solar desiccant wheel performance. Renewable Energy 30 (3):305–25. doi:https://doi.org/10.1016/j.renene.2004.04.010
- Ali, A., Y. Hwang, and R. Radermacher. 2015. Performance of a desiccant wheel cycle utilizing new zeolites material: Experimental investigation. Energy 81:137–45. doi:https://doi.org/10.1016/j.energy.2014.11.084
- Angrisani, G., F. Minichiello, C. Roselli, and M. Sasso. 2010. HVAC system driven by a micro-CHP: Experimental analysis. Energy and Buildings 42(11): 2028–35. doi:https://doi.org/10.1016/j.enbuild.2010.06.011
- Angrisani, G., C. Roselli, and M. Sasso. 2012. Experimental validation of constant efficiency models for the subsystems of an unconventional desiccant-based Air Handling Unit and investigation of its performance. Applied Thermal Engineering 33–34:100–8. doi:https://doi.org/10.1016/j.applthermaleng.2011.09.018
- Angrisani, G., F. Minichiello, C. Roselli, and M. Sasso. 2012. Experimental analysis on the dehumidification and thermal performance of a desiccant wheel. Applied Energy 92:563–72. doi:https://doi.org/10.1016/j.apenergy.2011.11.071
- Asim, N., M. H. Amin, M. A. Alghoul, M. Badiei, M. Masita, S. Gasaymeh, N. Amin, and S. Kamaruzzaman. 2019. Key factors of desiccant-based cooling systems: Materials. Applied Thermal Engineering 159:113946. doi:https://doi.org/10.1016/j.applthermaleng.2019.113946
- Bareschino, P., F. Pepe, C. Roselli, M. Sasso, and F. Tariello. 2019. Desiccant-based air handling unit alternatively equipped with three hygroscopic materials and driven by solar energy. Energies 12 (8):1543–63. doi:https://doi.org/10.3390/en12081543
- Bareschino, P., G. Diglio, F. Pepe, G. Angrisani, C. Roselli, and M. Sasso. 2015. Modeling of a rotary desiccant wheel: Numerical validation of a Variable Properties Model. Applied Thermal Engineering 78:640–8. doi:https://doi.org/10.1016/j.applthermaleng.2014.11.063
- Belguith, S. Z., Meddeb, and R. Ben Slama. 2021. Performance analysis of desiccant cool-ing systems in a hot and dry climate. Euro-Mediterranean Journal for Environmental Integration 6 (1):2. doi:https://doi.org/10.1007/s41207-020-00210-x
- Chung, J. D., D. Y. Lee, and S. M. Yoon. 2009. Optimization of desiccant wheel speed and area ratio of regeneration to dehumidification as a function of regeneration temperature. Solar Energy 83 (5):625–35. doi:https://doi.org/10.1016/j.solener.2008.10.011
- Collier Jr., R. K. 1989. Desiccant properties and their effect on cooling system performance. ASHRAE Transactions 95:823–7. http://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=6935328.
- Daou, K., R. Wang, and Z. Xia. 2006. Desiccant cooling air conditioning: A review. Renewable and Sustainable Energy Reviews 10 (2):55–77. doi:https://doi.org/10.1016/j.rser.2004.09.010
- Dong Chung, J., and D. Y. Lee. 2009. Effect of desiccant isotherm on the performance of Dessiccant wheel. International Journal of Refrigeration 32 (4):720–6. doi:https://doi.org/10.1016/j.ijrefrig.2009.01.003
- Duong, D. D. 1998. Adsorption analysis equilibria and kinetics. Vol. 2. London: Imperial College Press.
- Enteria, N., H. Yoshino, A. Mochida, A. Satake, R. Yoshie, R. Takaki, H. Yonekura, T. Mitamura, and Y. Tanaka. 2012. Performance of solar-desiccant cooling system with silica–gel (SiO2) and titanium dioxide (TiO2) desiccant wheel applied in East Asian climates. Solar Energy 86 (5):1261–12. doi:https://doi.org/10.1016/j.solener.2012.01.018
- Esfandiari Nia, F., D. Van Paassen, and M. H. Saidi. 2006. Modeling and simulation of desiccant wheel for air conditioning. Energy Building 38:1230–9. https://doi.org/10.1016/j.enbuild.2006.03.020.
- Factor, H. M., and G. Grossman. 1980. A packed bed dehumidifier/regenerator for solar air conditioning with Liquid desiccants. Solar Energy 24 (6):541–50. doi:https://doi.org/10.1016/0038-092X(80)90353-9
- Freundlich, H. M. F. 1906. Over the adsorption in solution. Journal of Physical Chemistry 57:385–471.
- Ge, T. S., F. Ziegler, and R. Z. Wang. 2010. A mathematical model for predicting the performance of a compound desiccant wheel (A model of compound desiccant wheel). Applied Thermal Engineering 30 (8–9):1005–15. doi:https://doi.org/10.1016/j.applthermaleng.2010.01.012
- Henning, H. M. 2007. Solar assisted air conditioning of buildings – an overview. Applied Thermal Engineering 27 (10):1734–49. doi:https://doi.org/10.1016/j.applthermaleng.2006.07.021
- Huang, T. C., and L. T. Cho. 1989. Relationships between constants of the freundlich equation and temperature for gaseous adsorption. Chemical Engineering Communications 75 (1):181–94. doi:https://doi.org/10.1080/00986448908940676
- Jani, D. B., M. Manish, and P. K. Saho. 2015. Performance studies of hybrid solid desiccant vapor compression air- conditioning system for hot and humid climates. Energy and Buildings 102:284–92. doi:https://doi.org/10.1016/j.enbuild.2015.05.055
- Jani, D. B., M. Mishra, and P. K. Sahoo. 2016. Experimental investigation on solid desiccant evapor compression hybrid air- conditioning system in hot and humid weather. Applied Thermal Engineering 104:556–64. doi:https://doi.org/10.1016/j.applthermaleng.2016.05.104
- Jian, Y., Y. Ying, M. Chen, X. Jing, X. Qibin, L. Yingwei, and L. Zhong. 2015. Adsorption isotherms and kinetics of water vapor on novel adsorbents MIL-101(Cr) @GO With super-high capacity. Applied Thermal Engineering 84:118–25. doi:https://doi.org/10.1016/j.applthermaleng.2015.03.040
- Jurinak, J. J. 1982. Open cycle solid desiccant cooling e component models and system simulations. Ph.D. Thesis. University of Wisconsin-Madison.
- Kanoglu, M., M. Özdinç Çarpinlioglu, and M. Yildirim. 2004. Energy and exergy analyses of an experimental open-cycle desiccant cooling system. Applied Thermal Engineering 24:919–32. doi:https://doi.org/10.1016/j.applthermaleng.2003.10.003
- Kayal, S., S. Baichuan, and B. B. Saha. 2016. Adsorption characteristics of AQSOA Zeolites and water for adsorption chillers. International Journal of Heat and Mass Transfer 92:1120–7. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2015.09.060
- Kottek, M., J. Grieser, C. Beck, B. Rudolf, and F. Rubel. 2006. World map of the Köppen-Geiger climate classification updated. Meteorologische Zeitschrift 15 (3):259–63. doi:https://doi.org/10.1127/0941-2948/2006/0130
- Kratochvfl, P., A. D. Jenkins, R. F. T. Stepto, and U. W. Suter. 1989. Glossary of basic terms in Polymer science. Pure and Applied Chemistry 68:2287–311.
- Lee, J., and D. Lee. 2012. Sorption characteristics of a novel polymeric desiccant. International Journal of Refrigeration 35 (7):1940–9. doi:https://doi.org/10.1016/j.ijrefrig.2012.07.009
- Li, A., A. B. Ismaie, K. Thu, M. K. Shahzad, K. C. Ng, and B. B. Saha. 2014. Formulation of water equilibrium uptakes on silica gel and ferroaluminophosphate zeolite for adsorption cooling and desalination applications. Evergreen Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy 1 (2):37–45.
- Maclaine-Cross, I. L., and P. J. Banks. 1972. Coupled heat and mass transfer in regenerators prediction using an analogy with heat transfer. International Journal of Heat and Mass Transfer 15 (6):1225–42. doi:https://doi.org/10.1016/0017-9310(72)90187-1
- Meddeb, Z., D. Bchiri, M. Chrigui, and M. R. Jeday. 2016. A study of the performance coefficient of an active magnetic regenerative refrigeration. Refrigeration Science and Technology 6:51–4. doi:https://doi.org/10.18462/iir.thermag.2016.0084
- Ni, C. C., and J. Y. San. 2002. Measurement of apparent solid-side mass diffusivity of a water vapor-silica gels system. International Journal of Heat and Mass Transfer 45 (9):1839–47. doi:https://doi.org/10.1016/S0017-9310(01)00291-5
- Panaras, G., E. Mathioulakis, V. Belessiotis, and N. Kyriakis. 2010. Experimental validation of a simplified approach for a desiccant wheel model. Energy and Buildings 42 (10):1719–25. doi:https://doi.org/10.1016/j.enbuild.2010.05.006
- Peluso, A., N. Gargiulo, P. Aprea, F. Pepe, and D. Caputo. 2014. Modeling Hydrogen Sulfide Adsorption on chromium-based MIL-101 metal organic framework. Sciences Advances Materials 6:1–7. https://doi.org/10.1166/sam.2014.1696.
- Sakoda, A., and M. Suzuki. 1986. Simultaneous transport of heat and mass in closed type adsorption cooling system utilizing solar heat. Journal of Solar Energy Engineering 108 (3):239–51. doi:https://doi.org/10.1115/1.3268099
- San, J. Y. 1993. Heat and mass transfer in a two- dimensional regenerator with a solid conduction Effect. International Journal of Heat and Mass Transfer 36 (3):633–43. doi:https://doi.org/10.1016/0017-9310(93)80039-W
- Severns, W. H., and J. R. Fellows. 2008. Air conditioning and refrigeration. New York: Wiley, 1966 midifiers. Applied Energy 85:128–42.
- Sun, B., and A. Chakraborty. 2014. Thermodynamic formalism of water uptakes on solid porous adsorbents for adsorption cooling applications. Applied Physics Letters 104 (20):201901. doi:https://doi.org/10.1063/1.4876922
- Threlkeld, J. L., J. W. Ramsey, and T. H. Kuehn. 1998. Thermal environmental engineering. 3rd ed. Englewood Cliffs, NJ: Prentice-Hall.
- Van Kevelen, D. W., and K. Te Nijenhuis. 2009. Properites of polymers: Their correlation with chemical structures, their numerical estimation and predication from additive group contributions. London: Elsevier, 109–17.
- Zhang, L. Z., and J. L. Niu. 2002. Performance comparison of desiccant wheels for air dehumidification and enthalpy recovery. Applied Thermal Engineering 22 (12):1347–67. doi:https://doi.org/10.1016/S1359-4311(02)00050-9
- Zheng, X., T. S. Ge, and R. Z. Wang. 2014. Recent progress on desiccant materials for solid desiccant cooling systems. Energy 74:280–94. doi:https://doi.org/10.1016/j.energy.2014.07.027
- Zouaoui, A., L .Zili-Ghedira, S. Ben Nasrallah. 2016. Open solid desiccant cooling air systems: A review and comparative study. Renewable and Sustainable Energy Reviews 54, 889–917. doi:https://doi.org/10.1016/j.rser.2015.10.055