References
- Aïssani, A., A. Chateauneuf, J. P. Fontaine, and P. Audebert. 2016. Quantification of workmanship insulation defects and their impact on the thermal performance of building facades. Applied Energy 165:272–84. doi:https://doi.org/10.1016/j.apenergy.2015.12.040
- Alawadhi, E. M. 2008. Thermal analysis of a building brick containing phase change material. Energy and Buildings 40 (3):351–7. doi:https://doi.org/10.1016/j.enbuild.2007.03.001
- Alawadhi, E. M. 2012. Using phase change materials in window shutter to reduce the solar heat gain. Energy and Buildings 47:421–9. doi:https://doi.org/10.1016/j.enbuild.2011.12.009
- Al-Sanea, S. A. 2003. Finite-volume thermal analysis of building roofs under two-dimensional periodic conditions. Building and Environment 38 (8):1039–49. doi:https://doi.org/10.1016/S0360-1323(03)00068-4
- Alshatshati, S. F. 2017. Estimating envelope thermal characteristics from single point in time thermal images. University of Dayton. https://pdfs.semanticscholar.org/ee4b/4c1803850f5fa07edc183ad9ed7f27f88e02.pdf
- Anderson, B. A., and R. P. Singh. 2006. Effective heat transfer coefficient measurement during air impingement thawing using an inverse method. International Journal of Refrigeration 29 (2):281–93. doi:https://doi.org/10.1016/j.ijrefrig.2005.05.016
- Antonopoulos, K. A., and E. Koronaki. 1998. Apparent and effective thermal capacitance of buildings. Energy 23 (3):183–92. doi:https://doi.org/10.1016/S0360-5442(97)00088-1
- ASHRAE. 1989. 1989 ASHRAE handbook of fundamentals. Vol. 4. Atlanta, GA: American Society of Heating, Refrigerating, and Air Conditioning Engineers.
- ASTM. 2013a. ASTM C1046: Standard practice for in-situ measurement of heat flux and temperature on building envelope components. https://www.astm.org/Standards/C1046.htm
- ASTM. 2013b. ASTM C1155: Standard practice for determining thermal resistance of building envelope components from the in-situ data. https://www.astm.org/Standards/C1155.htm
- Beck, J. V, and K. J. Arnold. 1977. Parameter estimation in engineering and science. New York, NY: James Beck.
- Beck, J. V., T. W. Petrie, and G. E. Courville. 1991. Using parameter estimation to analyze building envelope thermal performance. Special Report 9 (3):161–91. https://erdc-library.erdc.dren.mil/jspui/bitstream/11681/11625/1/SR-91-3.pdf.
- Bénard, C., B. Guerrier, and M. M. Rosset-Louerat. 1992. Optimal building energy management: Part I—Modeling. Journal of Solar Energy Engineering 114 (1):2–12. doi:https://doi.org/10.1115/1.2929978.
- Bergman, T. L., F. P. Incropera, D. P. DeWitt, and A. S. Lavine. 2011. Fundamentals of heat and mass transfer. Hoboken, NJ: John Wiley & Sons.
- Bierlaire, M. 2015. Simulation and optimization: A short review. Transportation Research Part C: Emerging Technologies 55:4–13. doi:https://doi.org/10.1016/j.trc.2015.01.004
- Braun, J., and N. Chaturvedi. 2002. An inverse gray-box model for transient building load prediction. HVAC&R Research 8 (1):73–99. doi:https://doi.org/10.1080/10789669.2002.10391290
- Cai, J., and J. E. Braun. 2012. Efficient and robust training methodology for inverse building modeling. Proceedings of SimBuild 5 (1):456–61. http://www.ibpsa-usa.org/index.php/ibpusa/article/view/463.
- Chaudhary, G., J. New, J. Sanyal, P. Im, Z. O’Neill, and V. Garg. 2016. Evaluation of “Autotune” calibration against manual calibration of building energy models. Applied Energy 182:115–34. doi:https://doi.org/10.1016/j.apenergy.2016.08.073
- Childs, K. W., G. E. Courville, and E. L. Bales. 1983. Thermal mass assessment: An explanation of the mechanisms by which building mass influences heating and cooling energy requirements. doi:https://doi.org/10.2172/5788833
- Cui, B., J. Dong, J. Munk, N. Mao, and T. Kuruganti. 2018. A simplified regression building thermal modelling method for detached two floor house in U.S. https://www.osti.gov/servlets/purl/1461939
- Curcija, C., and S. Pallin. 2018. THERMM: Heat & moisture modeling tool. https://www.energy.gov/sites/prod/files/2018/06/f52/35390_Curcija_050318-930.pdf
- DOE. 2012. Energy department announces six projects to develop energy-saving windows, roofs, and heating and cooling equipment. https://www.energy.gov/articles/energy-department-announces-six-projects-develop-energy-saving-windows-roofs-and-heating
- DOE. 2021. EnergyPlus version 9.5.0 engineering reference. https://energyplus.net/sites/all/modules/custom/nrel_custom/pdfs/pdfs_v9.5.0/EngineeringReference.pdf
- EIA. 2012. 2012 Commercial buildings energy consumption survey (CBECS). https://www.eia.gov/consumption/commercial/data/2012/bc/pdf/b1-b46.pdf
- Fister, I., X.-S. Yang, I. Fister, J. Brest, and D. Fister. 2013. A brief review of nature-inspired algorithms for optimization. http://arxiv.org/abs/1307.4186
- Fraisse, G., C. Viardot, O. Lafabrie, and G. Achard. 2002. Development of a simplified and accurate building model based on electrical analogy. Energy and Buildings 34 (10):1017–31. doi:https://doi.org/10.1016/S0378-7788(02)00019-1
- Fux, S. F., A. Ashouri, M. J. Benz, and L. Guzzella. 2014. EKF based self-adaptive thermal model for a passive house. Energy and Buildings 68:811–7. doi:https://doi.org/10.1016/j.enbuild.2012.06.016
- Haberl, J. S., and T. E. Bou-Saada. 1998. Procedures for calibrating hourly simulation models to measured building energy and environmental data. Journal of Solar Energy Engineering 120 (3):193–204. doi:https://doi.org/10.1115/1.2888069
- Hasse, C., M. Grenet, A. Bontemps, R. Dendievel, and H. Sallée. 2011. Realization, test and modelling of honeycomb wallboards containing a phase change material. Energy and Buildings 43 (1):232–8. doi:https://doi.org/10.1016/j.enbuild.2010.09.017
- Henninger, R. H, and M. J. Witte. 2011. EnergyPlus testing with ASHRAE 1052-RP toolkit–building fabric analytical tests. Lawrence Berkeley National Laboratory, USA. https://energyplus.net/sites/all/modules/custom/nrel_custom/eplus_files/current_testing_reports/ASHRAE1052RP-8.3.0-b45b06b780.pdf
- Heo, Y., R. Choudhary, and G. A. Augenbroe. 2012. Calibration of building energy models for retrofit analysis under uncertainty. Energy and Buildings 47:550–60. doi:https://doi.org/10.1016/j.enbuild.2011.12.029
- Hittle, D. C. 1979. The building loads analysis and system thermodynamics (blast) program, version 2.0: User’s manual. Cincinnati, OH: NTIS.
- Hittle, D. C, and C. O. Pedersen. 1981. Calculating building heating loads using the frequency response of multi-layered slabs [BLAST code, NBSLD code]. ASHRAE Trans.;(United States), 87(CONF-810657-). https://www.osti.gov/biblio/6340456
- Hudson, G., and C. P. Underwood. 1999. A simple building modelling procedure for MATLAB/SIMULINK. Building Simulaiton 1999:1–7. www.ibpsa.org/%5Cproceedings%5CBS1999%5CBS99_PA-05.pdf.
- Iu, C. 2002. CTF/PRFGenerator. http://www.hvac.okstate.edu/resources.html
- Janssen, H., B. Blocken, and J. Carmeliet. 2007. Conservative modelling of the moisture and heat transfer in building components under atmospheric excitation. International Journal of Heat and Mass Transfer 50 (5-6):1128–40. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2006.06.048
- Khoshbakht, M., M. W. Lin, and C. A. Feickert. 2009. A finite element model for hygrothermal analysis of masonry walls with FRP reinforcement. Finite Elements in Analysis and Design 45 (8-9):511–8. doi:https://doi.org/10.1016/j.finel.2009.02.007
- Koo, C., S. Park, T. Hong, and H. S. Park. 2014. An estimation model for the heating and cooling demand of a residential building with a different envelope design using the finite element method. Applied Energy 115:205–15. doi:https://doi.org/10.1016/j.apenergy.2013.11.014
- Koschenz, M. 1999. Calculation of surface temperature in DOE-2. The Building Energy Simulation User News 20 (2).
- Kramer, R. P., and A. W. M. van Schijndel. 2012. Inverse modeling of climate responses of monumental buildings. ArXiv:1206.4438.
- Kramer, R., J. van Schijndel, and H. Schellen. 2013. Inverse modeling of simplified hygrothermal building models to predict and characterize indoor climates. Building and Environment 68:87–99. doi:https://doi.org/10.1016/j.buildenv.2013.06.001
- Krutz, G. W., R. J. Schoenhals, and P. S. Hore. 1978. Application of the finite-element method to the inverse heat conduction problem. Numerical Heat Transfer 1 (4):489–98. doi:https://doi.org/10.1080/10407797809412181
- Kumar, R., and S. C. Kaushik. 2005. Performance evaluation of green roof and shading for thermal protection of buildings. Building and Environment 40 (11):1505–11. doi:https://doi.org/10.1016/j.buildenv.2004.11.015
- Kummert, M. P. André, and J. Nicolas. 1996. Development of simplified models for solar buildings optimal control. EuroSun’96, 1055–1061. https://pdfs.semanticscholar.org/8b17/55e136e9020ef6add676d8f6ddde82290ab0.pdf
- Lee, K., and J. E. Braun. 2016. Development and application of an inverse building model for demand response in small commercial buildings. Proceedings of SimBuild 1 (1):1–12. http://ibpsa-usa.org/index.php/ibpusa/article/view/121.
- Li, L. P., Z. G. Wu, Z. Y. Li, Y. L. He, and W. Q. Tao. 2008. Numerical thermal optimization of the configuration of multi-holed clay bricks used for constructing building walls by the finite volume method. International Journal of Heat and Mass Transfer 51 (13-14):3669–82. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2007.06.008
- Li, Q. 2017. Addressing data informativeness in risk-conscious building performance simulation applications. Atlanta, GA: Georgia Institute of Technology.
- Li, X. Q., Y. Chen, J. D. Spitler, and D. Fisher. 2009. Applicability of calculation methods for conduction transfer function of building constructions. International Journal of Thermal Sciences 48 (7):1441–51. doi:https://doi.org/10.1016/j.ijthermalsci.2008.11.006
- Lorenz, F., and G. Masy. 1982. Méthode d’évaluation de l’économie d’énergie apportée par l’intermittence de chauffage dans les bâtiments: Traitement par differences finies d’un model a deux constantes de temps. Faculte des Sciences Appliquees, 1–58, Université de Liège Faculté des Sciences Appliquees, Liège, Belgium.
- Lü, X. 2002. Modelling of heat and moisture transfer in buildings: I. Model program. Energy and Buildings 34 (10):1033–43. doi:https://doi.org/10.1016/S0378-7788(02)00021-X
- Luo, C., B. Moghtaderi, H. Sugo, and A. Page. 2008. A new stable finite volume method for predicting thermal performance of a whole building. Building and Environment 43 (1):37–43. doi:https://doi.org/10.1016/j.buildenv.2006.11.037
- Mitalas, G. P., and D. G. Stephenson. 1967. Room thermal response factors. Transactions of the American Society of Heating, Refrigerating, and Air Conditioning Engineers 73:1.1–1.7. http://web.mit.edu/parmstr/Public/NRCan/rp342.pdf.
- Mohamed, I. O. 2008. An inverse lumped capacitance method for determination of heat transfer coefficients for industrial air blast chillers. Food Research International 41 (4):404–10. doi:https://doi.org/10.1016/j.foodres.2008.01.005
- Ozel, M. 2011. Effect of wall orientation on the optimum insulation thickness by using a dynamic method. Applied Energy 88 (7):2429–35. doi:https://doi.org/10.1016/j.apenergy.2011.01.049
- Pallin, S. P. Boudreaux, S. Shrestha, J. New, and M. Adams. 2017. State-of-the-art for hygrothermal simulation tools (draft). Ornl.
- Peavy, B. 1977. Note on response factors and conduction transfer-function. Ashrae Journal-American Society of Heating Refrigerating and Air-Conditioning Engineers 19 (12):35. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=2ahUKEwi9upXBpe3kAhXkUN8KHQTlC5wQFjACegQIAxAC&url=http%3A%2F%2Fweb.mit.edu%2Fparmstr%2FPublic%2Fhittle.doc&usg=AOvVaw1TvcxIQHCldz0NdU0ACBeJ.
- Pilet, T., and T. Rakha. 2020. A building envelope characterization workflow for in-situ thermal performance assessment. ASHRAE Topical Conference Proceedings, 180–189, Online due to COVID-19, September 29–October 1, 2020..
- Ramos, N., J. Delgado, E. Barreira, and V. De Freitas. 2010. Hygrothermal numerical simulation: Application in moisture damage prevention. In Applications in computational fluid dynamics, ed. L. Angermann, 97–122. Rijeka, Croatia: InTech. https://books.google.com/books?id=N9CcDwAAQBAJ&lpg=PA97&ots=tjvGu0_jkG&dq=HygrothermalNumericalSimulation%3AApplicationinMoistureDamagePrevention&lr&pg=PR2#v=onepage&q=HygrothermalNumericalSimulation:ApplicationinMoistureDamagePrevention&f=f.
- Reddy, J. N., and D. K. Gartling. 2010. The finite element method in heat transfer and fluid dynamics, 3rd ed. Boca Raton, FL: CRC Press. doi:https://doi.org/10.1201/9781439882573
- Reddy, T. A. 2006. Literature review on calibration of building energy simulation programs: Uses, problems, procedures, uncertainty, and tools. ASHRAE Transactions 112:226. https://search.proquest.com/docview/192562738?pq-origsite=gscholar.
- Royapoor, M., and T. Roskilly. 2015. Building model calibration using energy and environmental data. Energy and Buildings 94:109–20. doi:https://doi.org/10.1016/j.enbuild.2015.02.050
- Seem, J. E. 1987. Modeling of heat transfer in buildings. Madison, WI: University of Wisconsin-Madison.
- Segerlind, L. J. 1976. Applied finite element analysis. New York, NY: Wiley.
- Spitler, J. D., and D. E. Fisher. 1999. Development of periodic response factors for use with the radiant time series method. Ashrae Transactions 105 (2):491–509.
- Spitler, J. D., D. E. Fisher, and C. O. Pedersen. 1997. The radiant time series cooling load calculation procedure. https://www.osti.gov/biblio/349986
- Strand, R., F. W. F. Buhl, J. Huang, and R. Taylor. 1999. Enhancing and extending the capabilities of the building heat balance simulation technique for use in EnergyPlus. In Proceedings of Building Simulation’99, vol. II, Kyoto, Japan, September 13–15, 1999.
- Strand, R. K. 2001. Modularization and simulation techniques for heat balance based energy and load calculation programs: The experience of the ASHRAE loads toolkit and EnergyPlus. Proceedings of Building Simulation 2001, Rio de Janeiro, Brazil, August 13–15, 2001. http://www.ibpsa.org/proceedings/BS2001/BS01_0043_50.pdf.
- Tabares-Velasco, P. C. C. Christensen, M. Bianchi, and C. Booten. 2012. Verification and validation of EnergyPlus conduction finite difference and phase change material models for opaque wall assemblies. https://www.nrel.gov/docs/fy12osti/55792.pdf
- Tian, W., Q. Wang, J. Song, and S. Wei. 2014. Calibrating dynamic building energy models using regression model and Bayesian analysis in building retrofit projects. International Building Performance Simulation Association.
- Tseng, A. A., T. C. Chen, and F. Z. Zhao. 1995. Direct sensitivity coefficient method for solving two-dimensional inverse heat conduction problems by finite-element scheme. Numerical Heat Transfer, Part B: Fundamentals 27 (3):291–307. doi:https://doi.org/10.1080/10407799508914958
- van Schijndel, A. W. M. 2009. The exploration of an inverse problem technique to obtain material properties of a building construction. In 4th International Building Physics Conference, Istanbul, Turkey, June 15–18, 2009.
- Venter, G. 2010. Review of optimization techniques.
- Walton, G. N. 1983. Thermal analysis research program reference manual. National Bureau of Standards, March. https://www.govinfo.gov/content/pkg/GOVPUB-C13-6176908b08a357a0ac91a8ab3db55b97/pdf/GOVPUB-C13-6176908b08a357a0ac91a8ab3db55b97.pdf
- Wang, S., and X. Xu. 2006. Parameter estimation of internal thermal mass of building dynamic models using genetic algorithm. Energy Conversion and Management 47 (13-14):1927–41. doi:https://doi.org/10.1016/j.enconman.2005.09.011
- Witte, M. J., R. H. Henninger, and D. B. Crawley. 2016. Experience testing EnergyPlus with the ASHRAE 1052-RP building fabric analytical tests. Proceedings of SimBuild 1 (1):1–8. https://ibpsa-usa.org/index.php/ibpusa/article/download/142/127.
- Yang, S., T. J. Pilet, and J. C. Ordonez. 2018. Volume element model for 3D dynamic building thermal modeling and simulation. Energy 148:642–61. doi:https://doi.org/10.1016/j.energy.2018.01.156
- Yao, W., X. Chen, W. Luo, M. van Tooren, and J. Guo. 2011. Review of uncertainty-based multidisciplinary design optimization methods for aerospace vehicles. Progress in Aerospace Sciences 47 (6):450–79. doi:https://doi.org/10.1016/j.paerosci.2011.05.001
- Yoon, J., E.-J. Lee, and D. E. Claridge. 2003. Calibration procedure for energy performance simulation of a commercial building. Journal of Solar Energy Engineering 125 (3):251–7. doi:https://doi.org/10.1115/1.1564076
- York, D. A, and C. C. Cappiello. 1981. DOE-2 engineers manual (Version 2. 1A). http://doe2.com/Download/Doe-21e/DOE-2engineersmanualversion2.1A.Pdf
- Zhu, Q., X. Xu, and J. Yu. 2012. Study of dynamic thermal performance of active pipe-embedded building envelopes based on frequency-domain finite difference method. ASim 2012 IBPSA Asia Conference, Shanghai. https://pdfs.semanticscholar.org/f1c5/3d632a441b49a0730c49cfcd7b108df01b6a.pdf.