References
- ADOT, (Arizona Department of Transportation). (2017a). ADOT’s use of rubberized asphalt gives new life to recycled tires. Retrieved from March 26, 2019 https://www.azdot.gov/mobile/media/news/2017/05/11/adot-s-use-of-rubberized-asphalt-gives-new-life-to-recycled-tires
- ADOT, (Arizona Department of Transportation). (2017b). Pavement Design Manual. Retrieved from https://apps.azdot.gov/files/materials-manuals/Preliminary-Engineering-Design/PavementDesignManual.pdf
- ADOT, (Arizona Department of Transportation). (2019). Quiet Pavement Program. Retrieved from https://www.azdot.gov/business/environmental-planning/programs/quiet-pavement-program
- Akbari, H., Rose, L. S., & Taha, H. (1999). Characterizing the fabric of the urban environment: A case study of Sacramento, California. Lawrence Berkeley National Laboratory. Berkeley, CA. doi:https://doi.org/10.2172/764362
- Akbari, H., Shea Rose, L., & Taha, H. (2003). Analyzing the land cover of an urban environment using high-resolution orthophotos. Landscape and Urban Planning, 63(1), 1–14. doi:https://doi.org/10.1016/S0169-2046(02)00165-2
- Albertson, J. D., Parlange, M. B., Katul, G. G., Chu, C. R., Stricker, H., & Tyler, S. (1995). Sensible Heat Flux From Arid Regions: A Simple FluxVariance Method. Water Resources Research, 31(4), 969–973. doi:https://doi.org/10.1029/94WR02978
- Allen, L., Lindberg, F., & Grimmond, C. S. B. (2011). Global to city scale urban anthropogenic heat flux: Model and variability. International Journal of Climatology, 31(13), 1990–2005. doi:https://doi.org/10.1002/joc.2210
- Andreou, E., & Axarli, K. (2012). Investigation of urban canyon microclimate in traditional and contemporary environment. Experimental investigation and parametric analysis. Renewable Energy, 43, 354–363. doi:https://doi.org/10.1016/j.renene.2011.11.038
- Arnfield, A. J. (2003). Two decades of urban climate research: A review of turbulence, exchanges of energy and water, and the urban heat island. International Journal of Climatology, 23(1), 1–26. doi:https://doi.org/10.1002/joc.859
- Arnfield, A. J., & Grimmond, C. S. B. (1998). An urban canyon energy budget model and its application to urban storage heat flux modeling. Energy and Buildings, 27(1), 61–68. doi:https://doi.org/10.1016/S0378-7788(97)00026-1
- Asaeda, T., Ca, V. T., & Wake, A. (1996). Heat storage of pavement and its effect on the lower atmosphere. Atmospheric Environment, 30(3), 413–427. doi:https://doi.org/10.1016/1352-2310(94)00140-5
- Baglione, M., Duty, M., & Pannone, G. (2007). April). Vehicle System Energy Analysis Methodology and Tool for Determining Vehicle Subsystem Energy Supply and Demand. doi:https://doi.org/10.4271/2007-01-0398
- Bentz, D. P., & Turpin, R. (2007). Potential applications of phase change materials in concrete technology. Cement and Concrete Composites, 29(7), 527–532. doi:https://doi.org/10.1016/j.cemconcomp.2007.04.007
- Bondank, E. N., Chester, M. V., & Ruddell, B. L. (2018). Water Distribution System Failure Risks with Increasing Temperatures [Research-article]. Environmental Science & Technology, 52(17), 9605–9614. doi:https://doi.org/10.1021/acs.est.7b01591
- Burillo, D., Chester, M. V., Pincetl, S., Fournier, E. D., & Reyna, J. (2019). Forecasting peak electricity demand for Los Angeles considering higher air temperatures due to climate change. Applied Energy, 23(6), 1–9. (November2018). doi:https://doi.org/10.1016/j.apenergy.2018.11.039
- Carnielo, E., & Zinzi, M. (2013). Optical and thermal characterisation of cool asphalts to mitigate urban temperatures and building cooling demand. Building and Environment, 60, 56–65. doi:https://doi.org/10.1016/j.buildenv.2012.11.004
- CDC, (Centers for Disease Control and Prevention). (2012). Number of Heat-Related Deaths, by Sex, United States, 1999–2010. National Vital Statistics System, 61(36), 729.
- Çengel, Y. (2002). Heat Transfer: A Practical Approach (2nd ed.). New York: Mcgraw-Hill.
- Chester, M., Fraser, A., Matute, J., Flower, C., & Pendyala, R. (2015). Parking Infrastructure: A Constraint on or Opportunity for Urban Redevelopment? A Study of Los Angeles County Parking Supply and Growth. Journal of the American Planning Association, 81(4), 268–286. doi:https://doi.org/10.1080/01944363.2015.1092879
- Chiasson, A. D., Spitler, J. D., Rees, S. J., & Smith, M. D. (2000). A Model for Simulating the Performance of a Pavement Heating System as a Supplemental Heat Rejecter with Closed-Loop Ground-Source Heat Pump Systems. Journal of Solar Energy Engineering, 122(4), 183. doi:https://doi.org/10.1115/1.1330725
- Clark, S. S., Chester, M. V., Seager, T. P., & Eisenberg, D. A. (2019). The vulnerability of interdependent urban infrastructure systems to climate change: Could Phoenix experience a Katrina of extreme heat? Sustainable and Resilient Infrastructure, 4(1), 21–35. doi:https://doi.org/10.1080/23789689.2018.1448668
- Corripio, J. G. (2019). Insol: Solar Radiation. Retrieved from https://meteoexploration.com/R/insol/index.html
- Dai, Z., Guldmann, J. M., & Hu, Y. (2018). Spatial regression models of park and land-use impacts on the urban heat island in central Beijing. Science of the Total Environment, 626, 1136–1147. doi:https://doi.org/10.1016/j.scitotenv.2018.01.165
- Davis, S. C., & Boundy, R. G. (2019). Transportation Energy Data Book: Edition 37. Retrieved from http://cta.ornl.gov/data
- Dempsey, B. J., & Thompson, M. R. (1970). A Heat Transfer Model for Evaluating Frost Action and Temperature-Related Effects in Multilayered Pavement Systems. Highway Research Record, (342) Retrieved from https://trid.trb.org/view/102331
- Dobos, E. (2011). Encyclopedia of Soil Science, 2nd. doi:https://doi.org/10.1081/E-ESS
- DOE, (U.S. Department of Energy). (2019). Where the Energy Goes: Gasoline Vehicles. Retrieved from March 28, 2019 https://www.fueleconomy.gov/feg/atv.shtml
- Eisenman, D. P., Wilhalme, H., Tseng, C., Chester, M., English, P., Pincetl, S., … Dhaliwal, S. K. (2016). Heat Death Associations with the built environment, social vulnerability and their interactions with rising temperature. Health & Place, 41, 89–99. doi:https://doi.org/10.1016/j.healthplace.2016.08.007
- EPA, (Environmental Protection Agency). (2016). Scrap Tires. Retrieved from March 26, 2019https://archive.epa.gov/epawaste/conserve/materials/tires/web/html/live.html
- EPA, (Environmental Protection Agency). (2017). Automotive Trends Report 2018. EPA-420-R-19-002. Retrieved from https://www.epa.gov/automotive-trends/download-data-automotive-trends-report
- Erell, E., Pearlmutter, D., Boneh, D., & Kutiel, P. B. (2014). Effect of high-albedo materials on pedestrian heat stress in urban street canyons. Urban Climate, 10(P2), 367–386. doi:https://doi.org/10.1016/j.uclim.2013.10.005
- FAA, (Federal Aviation Administration). (2016). Airport Pavement Design and Evaluation. U.S. Department of Transportation, Washington D.C. org/UFC3-201-01
- Fujimoto, A., Saida, A., Fukuhara, T., & Futagami, T. (2015). Heat Transfer Analysis on Road Surface. Retrieved from https://www.researchgate.net/publication/268351732%0AHEAT
- Gasparrini, A., Guo, Y., Hashizume, M., Lavigne, E., Zanobetti, A., Schwartz, J., … Armstrong, B. (2015). Mortality risk attributable to high and low ambient temperature: A multicountry observational study. The Lancet, 386(9991), 369–375. doi:https://doi.org/10.1016/S0140-6736(14)62114-0
- Gasser, P., Lustenberger, P., Cinelli, M., Kim, W., Spada, M., Burgherr, P., … Sun, T. Y. (2019). A review on resilience assessment of energy systems. Sustainable and Resilient Infrastructure, 00(00), 1–27. doi:https://doi.org/10.1080/23789689.2019.1610600
- Golden, J. S., & Kaloush, K. E. (2006). Mesoscale and microscale evaluation of surface pavement impacts on the urban heat island effects. International Journal of Pavement Engineering, 7(1), 37–52. doi:https://doi.org/10.1080/10298430500505325
- Graff Zivin, J., & Neidell, M. (2014). Temperature and the Allocation of Time: Implications for Climate Change. Journal of Labor Economics, 32(1), 1–26. doi:https://doi.org/10.1086/671766
- Gui, J., Phelan, P. E., Kaloush, K. E., & Golden, J. S. (2007). Impact of Pavement Thermophysical Properties on Surface Temperatures. Journal of Materials in Civil Engineering, 19(8), 683–690. doi:https://doi.org/10.1061/(ASCE)0899-1561(2007)19:8(683)
- Hall, M. R., Dehdezi, P. K., Dawson, A. R., Grenfell, J., & Isola, R. (2012). Influence of the Thermophysical Properties of Pavement Materials on the Evolution of Temperature Depth Profiles in Different Climatic Regions. Journal of Materials in Civil Engineering, 24(1), 32–47. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0000357
- Hart, M. A., & Sailor, D. J. (2009). Quantifying the influence of land-use and surface characteristics on spatial variability in the urban heat island. Theoretical and Applied Climatology, 95(3–4), 397–406. doi:https://doi.org/10.1007/s00704-008-0017-5
- Heath, M. T. (2002). Scientific computing: An introductory survey (2nd ed.). Boston, MA: McGraw-Hill.
- Hermansson, Å. (2004). Mathematical model for paved surface summer and winter temperature: Comparison of calculated and measured temperatures. Cold Regions Science and Technology, 40(1–2), 1–17. doi:https://doi.org/10.1016/j.coldregions.2004.03.001
- Heusinkveld, B. G., Jacobs, A. F. G., Holtslag, A. A. M., & Berkowicz, S. M. (2004). Surface energy balance closure in an arid region: Role of soil heat flux. Agricultural and Forest Meteorology, 122(1–2), 21–37. doi:https://doi.org/10.1016/j.agrformet.2003.09.005
- Hoehne, C. G. (2019). Heat Transfer Modeling for Phoenix Urban Transportation-Heat Analysis. Retrieved from https://github.com/cghoehne/transport-uhi-phx
- Hoehne, C. G., Chester, M. V., Fraser, A. M., & King, D. A. (2019). Valley of the sun-drenched parking space: The growth, extent, and implications of parking infrastructure in Phoenix. Cities, 89, 186–198. doi:https://doi.org/10.1016/j.cities.2019.02.007
- Holland, R. (2014). Estimating the Number of Parking Spaces Per Acre. Center for Profitable Agriculture, Institute of Agriculture, University of Tennessee website: https://ag.tennessee.edu/cpa/InformationSheets/CPA222.pdf
- Hsiao, Y. Y., Chang, W. C., & Chen, S. L. (2010). A mathematic model of thermoelectric module with applications on waste heat recovery from automobile engine. Energy, 35(3), 1447–1454. doi:https://doi.org/10.1016/j.energy.2009.11.030
- Hu, L., Li, Y., Zou, X., Du, S., Liu, Z., & Huang, H. (2017). Temperature Characteristics of Porous Portland Cement Concrete during the Hot Summer Session. Advances in Materials Science and Engineering. doi:https://doi.org/10.1155/2017/2058034
- Ichinose, T., Shimodozono, K., & Hanaki, K. (1999). Impact of anthropogenic heat on urban climate in Tokyo. Atmospheric Environment, 33(24–25), 3897–3909. doi:https://doi.org/10.1016/S1352-2310(99)00132-6
- Im, J. S., Dessouky, S., Bai, B. C., Vo, H. V., & Park, D.-W. (2015). Thermal Properties of Asphalt Mixtures Modified with Conductive Fillers. Journal of Nanomaterials, (2015, 1–6. doi:https://doi.org/10.1155/2015/926809
- Johansson, E. (2006). Influence of urban geometry on outdoor thermal comfort in a hot dry climate: A study in Fez, Morocco. Building and Environment, 41(10), 1326–1338. doi:https://doi.org/10.1016/j.buildenv.2005.05.022
- Karner, A., Hondula, D. M., & Vanos, J. K. (2015). Heat exposure during non-motorized travel: Implications for transportation policy under climate change. Journal of Transport & Health, 2(4), 451–459. doi:https://doi.org/10.1016/j.jth.2015.10.001
- Kenworthy, J. R., & Laube, F. B. (1999). Patterns of automobile dependence in cities: An international overview of key physical and economic dimensions with some implications for urban policy. Transportation Research Part A: Policy and Practice, 33(7–8), 691–723. doi:https://doi.org/10.1016/S0965-8564(99)00006-3
- Kim, M., Lee, K., & Cho, G. H. (2017). Temporal and spatial variability of urban heat island by geographical location: A case study of Ulsan, Korea. Building and Environment, 126(August), 471–482. doi:https://doi.org/10.1016/j.buildenv.2017.10.023
- Kim, S., Park, S., Kim, S., & Rhi, S.-H. (2011). A Thermoelectric Generator Using Engine Coolant for Light-Duty Internal Combustion Engine-Powered Vehicles. Journal of Electronic Materials, 40(5), 812–816. doi:https://doi.org/10.1007/s11664-011-1580-6
- Kjellstrom, T., Holmer, I., & Lemke, B. (2009). Workplace heat stress, health and productivity – An increasing challenge for low and middle-income countries during climate change. Global Health Action, 2(1), 2047. doi:https://doi.org/10.3402/gha.v2i0.2047
- Kovats, R. S., & Hajat, S. (2008). Heat Stress and Public Health: A Critical Review. Annual Review of Public Health, 29(1), 41–55. doi:https://doi.org/10.1146/annurev.publhealth.29.020907.090843
- Krayenhoff, E. S., & Voogt, J. A. (2010). Impacts of urban albedo increase on local air temperature at daily-annual time scales: Model results and synthesis of previous work. Journal of Applied Meteorology and Climatology, 49(8), 1634–1648. doi:https://doi.org/10.1175/2010JAMC2356.1
- Li, H., Harvey, J., & Kendall, A. (2013a). Field measurement of albedo for different land cover materials and effects on thermal performance. Building and Environment, 59, 536–546. doi:https://doi.org/10.1016/j.buildenv.2012.10.014
- Li, H., Harvey, J. T., Holland, T. J., & Kayhanian, M. (2013b). The use of reflective and permeable pavements as a potential practice for heat island mitigation and stormwater management. Environmental Research Letters, 8(1), 015023. doi:https://doi.org/10.1088/1748-9326/8/1/015023
- Li, H., He, Y., & Harvey, J. (2016). Human Thermal Comfort: Modeling the Impact of Different Cool Pavement Strategies. Transportation Research Record: Journal of the Transportation Research Board, 2575(1), 92–102. doi:https://doi.org/10.3141/2575-10
- Luca, J., & Mrawira, D. (2005). New Measurement of Thermal Properties of Superpave Asphalt Concrete. Journal of Materials in Civil Engineering, 17(1), 72–79. doi:https://doi.org/10.1061/(ASCE)0899-1561(2005)17:1(72)
- Manville, M., & Shoup, D. (2005). Parking, People, and Cities. Journal of Urban Planning and Development, 131(4), 233–245. doi:https://doi.org/10.1061/(ASCE)0733-9488(2005)131:4(233)
- Markolf, S. A., Hoehne, C. G., Fraser, A., & Chester, M. (2017). Maintaining reliability of transportation systems and interconnected infrastructure under climate change. International Conference on Sustainable Infrastructure 2017: Methodology - Proceedings of the International Conference on Sustainable Infrastructure 2017, New York, NY. https://doi.org/10.1061/9780784481196.020
- Middel, A., Häb, K., Brazel, A. J., Martin, C. A., & Guhathakurta, S. (2014). Impact of urban form and design on mid-afternoon microclimate in Phoenix Local Climate Zones. Landscape and Urban Planning, 122, 16–28. doi:https://doi.org/10.1016/j.landurbplan.2013.11.004
- Middel, A., Lukasczyk, J., Maciejewski, R., Demuzere, M., & Roth, M. (2018). Sky View Factor footprints for urban climate modeling. Urban Climate, 25(April), 120–134. doi:https://doi.org/10.1016/j.uclim.2018.05.004
- Miller, N. L., Hayhoe, K., Jin, J., & Auffhammer, M. (2008). Climate, Extreme Heat, and Electricity Demand in California. Journal of Applied Meteorology and Climatology, 47(6), 1834–1844. doi:https://doi.org/10.1175/2007JAMC1480.1
- Minhoto, M. J. C., Pais, J. C., & Pereira, P. A. (2006). Asphalt Pavement Temperature Prediction. Asphalt Rubber 2006: Proceedings, Los Angeles, CA, 193–207. https://doi.org/10.1061/9780784413005.029
- Moise, A. F., & Aynsley, R. (1999). Ambient ultraviolet radiation levels in public shade settings. International Journal of Biometeorology, 43(3), 128–138. doi:https://doi.org/10.1007/s004840050128
- Monteith, J. L., & Unsworth, M. H. (2013). Principles of Environmental Physics: Plants, animals, and the atmosphere (4th ed.). Amsterdam: Academic Press.
- NASA, (National Aeronautics and Space Administration). (2019). ASTER. Retrieved from March 14, 2019 https://terra.nasa.gov/about/terra-instruments/aster
- Nobel, P. S., & Geller, G. N. (1987). Temperature Modelling of Wet and Dry Desert Soils. The Journal of Ecology, 75(1), 247. doi:https://doi.org/10.2307/2260549
- Obradovich, N., & Fowler, J. H. (2017). Climate change may alter human physical activity patterns. Nature Human Behaviour, 1(April), 0097. doi:https://doi.org/10.1038/s41562-017-0097
- Oke, T. R. (1982). The energetic basis of the urban heat island. Quarterly Journal of the Royal Meteorological Society, 108(455), 1–24. doi:https://doi.org/10.1002/qj.49710845502
- OpenStreetMap contributors. (2019). Planet dump Retrieved from https://www.openstreetmap.org/
- Orr, B., Akbarzadeh, A., Mochizuki, M., & Singh, R. (2016). A review of car waste heat recovery systems utilising thermoelectric generators and heat pipes. Applied Thermal Engineering, 101, 490–495. doi:https://doi.org/10.1016/j.applthermaleng.2015.10.081
- Pham, J. V., Baniassadi, A., Brown, K. E., Heusinger, J., & Sailor, D. J. (2019). Comparing photovoltaic and reflective shade surfaces in the urban environment: Effects on surface sensible heat flux and pedestrian thermal comfort. Urban Climate, 29, 100500. doi:https://doi.org/10.1016/j.uclim.2019.100500
- Qin, Y. (2015). Urban canyon albedo and its implication on the use of reflective cool pavements. Energy and Buildings, 96, 86–94. doi:https://doi.org/10.1016/j.enbuild.2015.03.005
- Rafi, M. M., & Aziz, T. (2019). Experimental testing of fly ash containing recycled aggregate concrete exposed to high temperatures. Sustainable and Resilient Infrastructure, 00(00), 1–16. doi:https://doi.org/10.1080/23789689.2019.1681820
- Rajoo, S., Romagnoli, A., Martinez-Botas, R., Pesiridis, A., Copeland, C., & Bin Mamat, A. M. I. (2014). Automotive exhaust power and waste heat recovery technologies. Automotive Exhaust Emissions and Energy Recovery (pp. 265–281). Hauppauge, NY: NOVA Science Publishers. doi:https://doi.org/10.13140/2.1.4809.0565
- Reddy, G. N., Venkatesan, V., & Maniyar, U. (2015). Estimation of harvestable energy from vehicle waste heat. 2015 International Conference on Renewable Energy Research and Applications (ICRERA), Palermo, 618–625. doi:https://doi.org/10.1109/ICRERA.2015.7418487
- Reyna, J. L., & Chester, M. V. (2017). Energy efficiency to reduce residential electricity and natural gas use under climate change. Nature Communications, 8(1), 14916. doi:https://doi.org/10.1038/ncomms14916
- Sailor, D. J., & Lu, L. (2004). A top–down methodology for developing diurnal and seasonal anthropogenic heating profiles for urban areas. Atmospheric Environment, 38(17), 2737–2748. doi:https://doi.org/10.1016/j.atmosenv.2004.01.034
- Santamouris, M., Gaitani, N., Spanou, A., Saliari, M., Giannopoulou, K., Vasilakopoulou, K., & Kardomateas, T. (2012). Using cool paving materials to improve microclimate of urban areas – Design realization and results of the flisvos project. Building and Environment, 53, 128–136. doi:https://doi.org/10.1016/j.buildenv.2012.01.022
- Schaeffer, R., Salem, A., Frossard, A., Lucena De, P., Soares, B., Cesar, M., … Sadeck, M. (2012). Energy sector vulnerability to climate change: A review. Energy, 38(1), 1–12. doi:https://doi.org/10.1016/j.energy.2011.11.056
- Shoup, D. (2017). The high cost of free parking: Updated edition. New York, NY: Routledge.
- Smith, C., Lindley, S., & Levermore, G. (2009). Estimating spatial and temporal patterns of urban anthropogenic heat fluxes for UK cities: The case of Manchester. Theoretical and Applied Climatology, 98(1–2), 19–35. doi:https://doi.org/10.1007/s00704-008-0086-5
- Stamatakis, E., Nnoaham, K., Foster, C., & Scarborough, P. (2013). The influence of global heating on discretionary physical activity: An important and overlooked consequence of climate change. Journal of Physical Activity & Health, 10(6), 765–768. https://doi.org/10.1123/jpah.10.6.765
- Stone, B., Hess, J. J., & Frumkin, H. (2010). Urban form and extreme heat events: Are sprawling cities more vulnerable to climate change than compact cities? Environmental Health Perspectives, 118(10), 1425–1428. doi:https://doi.org/10.1289/ehp.0901879
- Stone, B., & Rodgers, M. O. (2001). Urban Form and Thermal Efficiency: How the Design of Cities Influences the Urban Heat Island Effect. Journal of the American Planning Association, 67(2), 186–198. doi:https://doi.org/10.1080/01944360108976228
- Sun, R., Xie, W., & Chen, L. (2018). A landscape connectivity model to quantify contributions of heat sources and sinks in urban regions. Landscape and Urban Planning, 178, (September2017) 43–50. https://doi.org/10.1016/j.landurbplan.2018.05.015
- Taha, H. (1997). Urban climates and heat islands: Albedo, evapotranspiration, and anthropogenic heat. Energy and Buildings, 25(2), 99–103. doi:https://doi.org/10.1016/S0378-7788(96)00999-1
- Taleghani, M., Sailor, D., & Ban-Weiss, G. A. (2016). Micrometeorological simulations to predict the impacts of heat mitigation strategies on pedestrian thermal comfort in a Los Angeles neighborhood. Environmental Research Letters, 11(2), 2. doi:https://doi.org/10.1088/1748-9326/11/2/024003
- Tan, S. A., & Fwa, T. F. (1992). Influence of pavement materials on the thermal environment of outdoor spaces. Building and Environment, 27(3), 289–295. doi:https://doi.org/10.1016/0360-1323(92)90030-S
- University of Utah. (2019). MesoWest Data. Retrieved from March 14, 2019 https://mesowest.utah.edu/
- USACE, (United States Army Corps of Engineers). (2018). Unified Facilities Criteria. Washington D.C: U.S. Department of the Army. org/UFC3-201-01
- USGS, (United States Geological Survey). (2018). On Demand Surface Kinetic Temperature. Washington D.C: U.S. Department of the Interior. doi:https://doi.org/10.5067/ASTER/AST_08.003
- Wallington, T. J., Kaiser, E. W., & Farrell, J. T. (2006). Automotive fuels and internal combustion engines: A chemical perspective. Chemical Society Reviews, 35(4), 335. doi:https://doi.org/10.1039/b410469m
- Wang, D., & Roesler, J. R. (2012). One-Dimensional Rigid Pavement Temperature Prediction Using Laplace Transformation. Journal of Transportation Engineering, 138(9), 1171–1177. doi:https://doi.org/10.1061/(ASCE)TE.1943-5436.000041
- Wang, Y., Berardi, U., & Akbari, H. (2016). Comparing the effects of urban heat island mitigation strategies for Toronto, Canada. Energy and Buildings, 114, 2–19. doi:https://doi.org/10.1016/j.enbuild.2015.06.046
- Wicki, A., Parlow, E., & Feigenwinter, C. (2018). Evaluation and Modeling of Urban Heat Island Intensity in Basel, Switzerland. Climate, 6(3), 55. doi:https://doi.org/10.3390/cli6030055
- Yang, J., & Stabler, F. R. (2009). Automotive Applications of Thermoelectric Materials. Journal of Electronic Materials, 38(7), 1245–1251. doi:https://doi.org/10.1007/s11664-009-0680-z
- Yun, T. S., Jeong, Y. J., & Youm, K.-S. (2014). Effect of Surrogate Aggregates on the Thermal Conductivity of Concrete at Ambient and Elevated Temperatures. The Scientific World Journal, (2014, 1–9. doi:https://doi.org/10.1155/2014/939632