References
- Atteshamuddin, S., & Yuwaraj, M. (2019). Modeling and analysis of functionally graded sandwich beams: A review. Mechanics of Advanced Materials and Structures, 26(21), 1776–1795. https://doi.org/10.1080/15376494.2018.1447178
- Aydogdu, M., & Taskin, V. (2007). Free vibration analysis of functionally graded beams with simply supported edges. Materials & Design, 28(5), 1651–1656. https://doi.org/10.1016/j.matdes.2006.02.007
- Bose, A., & Sathujoda, P. (2019). Natural frequency analysis of a functionally graded rotor system using three-dimensional finite element method. Vibroengineering PROCEDIA, 29, 70–75. https://doi.org/10.21595/vp.2019.21099
- Bose, A., & Sathujoda, P. (2020a). Effect of thermal gradient on vibration characteristics of a functionally graded shaft system. Mathematical Modelling of Engineering Problems, 7(2), 212–222. https://doi.org/10.18280/mmep.070207
- Bose, A., & Sathujoda, P. (2020b). Natural frequency analysis of a porous functionally graded shaft system. International Journal of Aerospace and Mechanical Engineering, 14(3), 123–131. https://publications.waset.org/profile/4968865964
- Chakraborty, A., Gopalakrishnan, S., & Reddy, J. (2003). A new beam finite element for the analysis of functionally graded materials. International Journal of Mechanical Sciences, 45(3), 519–539. https://doi.org/10.1016/S0020-7403(03)00058-4
- Ferreira, S., Rocha, L., Ariza, E., Sequeira, P., Watanabe, Y., & Fernandes, J. (2011). Corrosion behaviour of Al/Al3Ti and Al/Al3Zr functionally graded materials produced by centrifugal solid-particle method: Influence of the intermetallics volume fraction. Corrosion Science, 53(6), 2058–2065. https://doi.org/10.1016/j.corsci.2011.02.010
- Friswell, M. (2010). Dynamics of rotating machines. Cambridge University Press.
- Gayen, D., Chakraborty, D., & Tiwari, R. (2017). Whirl frequencies and critical speeds of a rotor-bearing system with a cracked functionally graded shaft – Finite element analysis. European Journal of Mechanics - A/Solids, 61, 47–58. https://doi.org/10.1016/j.euromechsol.2016.09.003
- Gayen, D., Chakraborty, D., & Tiwari, R. (2018). Free vibration analysis of functionally graded shaft system with a surface crack. Journal of Vibration Engineering & Technologies, 6(6), 483–494. https://doi.org/10.1007/s42417-018-0065-9
- Gayen, D., & Roy, T. (2014). Finite element based vibration analysis of functionally graded spinning shaft system. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(18), 3306–3321. https://doi.org/10.1177/0954406214527923
- Kadoli, R., Akhtar, K., & Ganesan, N. (2008). Static analysis of functionally graded beams using higher order shear deformation theory. Applied Mathematical Modelling, 32(12), 2509–2525. https://doi.org/10.1016/j.apm.2007.09.015
- Koizumi, M. (1997). FGM activities in Japan. Composites Part B: Engineering, 28(1–2), 1–4. https://doi.org/10.1016/S1359-8368(96)00016-9
- Li, C., Yu, H., Zhou, S., & Wen, B. (2013). Simulations and experimental investigation on motion stability of a flexible rotor-bearing system with a transverse crack. Chinese Journal of Mechanical Engineering, 26(6), 1194–1203. https://doi.org/10.3901/CJME.2013.06.1194
- Ma, L. S., & Lee, D. W. (2012). Exact solutions for non-linear static responses of a shear deformable FGM beam under an inplane thermal loading. European Journal of Mechanics - A/Solids, 31(1), 13–20. https://doi.org/10.1016/j.euromechsol.2011.06.016
- Mahi, A., Adda Bedia, E., Tounsi, A., & Mechab, I. (2010). An analytical method for temperature-dependent free vibration analysis of functionally graded beams with general boundary conditions. Composite Structures, 92(8), 1877–1887. https://doi.org/10.1016/j.compstruct.2010.01.010
- Musbah, M., Gariba, A., & Islak, S. (2020). Corrosion properties of Ti-B4C/CNF functionally graded materials. E-journal of New World Sciences Academy, 15(3), 41–49. https://doi.org/10.12739/NWSA.2020.15.3.2A0183
- Nelson, H., & Finite Rotating, A. (1980). Shaft element using Timoshenko beam theory. Journal of Mechanical Design, 102(4), 793–803. https://doi.org/10.1115/1.3254824
- Nelson, H., & McVaugh, J. (1976). The dynamics of rotor-bearing systems using finite elements. Journal of Engineering for Industry, 98(2), 593–600. https://doi.org/10.1115/1.3438942
- Pradhan, K., & Chakraverty, S. (2013). Free vibration of Euler and Timoshenko functionally graded beams by Rayleigh–Ritz method. Composites Part B: Engineering, 51, 175–184. https://doi.org/10.1016/j.compositesb.2013.02.027
- Reddy, J., & Chin, C. (1998). Thermomechanical analysis of functionally graded cylinders and plates. Journal Of Thermal Stresses, 21(6), 593–626. https://doi.org/10.1080/01495739808956165
- Ruhl, R., Booker, J., & Finite Element, A. (1972). Model for distributed parameter turborotor systems. Journal of Engineering for Industry, 94(1), 126–132. https://doi.org/10.1115/1.3428101
- Sankar, B. V. (2001). An elasticity solution for functionally graded beams. Composites Science and Technology, 61, 689–696. https://doi.org/10.1016/S0266-3538(01)00007-0
- Sathujoda, P., Obalareddy, B., Batchu, A., Canale, G., Maligno, A., & Citarella, R. (2020). Effect of corrosion on the natural and whirl frequencies of a functionally graded rotor-bearing system subjected to thermal gradients. Materials, 13(20), 4546. https://doi.org/10.3390/ma13204546
- Sekhar, A., & Prabhu, B. (1995). Effect of coupling misalignment on vibrations of rotating machinery. Journal of Sound and Vibration, 185(4), 665–671. https://doi.org/10.1006/jsvi.1995.0407
- Shen, H. (2009). Functionally graded materials. [ S.l.]: CRC press.
- Swaminathan, K., Naveenkumar, D., Zenkour, A., & Carrera, E. (2015). Stress vibration and buckling analyses of FGM plates—A state-of-the-art review. Composite Structures, 120, 10–31. https://doi.org/10.1016/j.compstruct.2014.09.070
- Touloukian, Y. (1967). Thermophysical properties of high temperature solid materials. Macmillan, New York.
- Udatha, P., Sekhar, A. S., & Velmurugan, R. (2019). The effect of CNT to enhance the dynamic properties of hybrid composite tube shafts. Mechanics of Advanced Materials and Structures, 26(1), 88–92. https://doi.org/10.1080/15376494.2018.1534172
- Wattanasakulpong, N., & Ungbhakorn, V. (2014). Linear and non-linear vibration analysis of elastically restrained ends FGM beams with porosities. Aerospace Science and Technology, 32(1), 111–120. https://doi.org/10.1016/j.ast.2013.12.002
- Zhang, D. (2013). Thermal post-buckling and non-linear vibration analysis of FGM beams based on physical neutral surface and high order shear deformation theory. Meccanica, 49(2), 283–293. https://doi.org/10.1007/s11012-013-9793-9