Hierarchical spatial-temporal modeling and monitoring of melt pool evolution in laser-based additive manufacturing

References

• Aboutaleb, A.M., Bian, L., Elwany, A., Shamsaei, N., Thompson, S.M. and Tapia, G. (2017) Accelerated process optimization for laser-based additive manufacturing by leveraging similar prior studies. IISE Transactions, 49(1), 31–44.
   Web of Science ®Google Scholar
• Ahmad, S., Lavin, A., Purdy, S. and Agha, Z. (2017) Unsupervised real-time anomaly detection for streaming data. Neurocomputing, 262, 134–147.
   Web of Science ®Google Scholar
• Angryk, R.A. and Galarus, D.E. (2016) The SMART approach to comprehensive quality assessment of site-based spatial-temporal data, in Proceedings of the IEEE International Conference on Big Data, IEEE Press, Piscataway, NJ, pp. 2636–2645.
   Google Scholar
• Aryal, A.M. and Wang, S. (2017) Discovery of patterns in spatio-temporal data using clustering techniques, in Proceedings of the 2nd International Conference on Image, Vision and Computing, IEEE Press, Piscataway, NJ, pp. 990–995.
   Google Scholar
• Baboo, S.S. and Tajudin, K. (2013) Clustering centroid finding algorithm (CCFA) using spatial temporal data mining concept, in Proceedings of the International Conference on Pattern Recognition, Informatics and Mobile Engineering IEEE Press, Piscataway, NJ, pp. 30–36.
   Google Scholar
• Bai, Y., Hu, J. and You, J. (2015) Panel data partially linear varying-coefficient model with errors correlated in space and time. Statistica Sinica, 25(10), 275–294.
   Google Scholar
• Bernardinelli, L., Clayton, D., Pascutto, C., Montomoli, C., Ghislandi, M. and Songini, M. (1995) Bayesian analysis of space—time variation in disease risk. Statistics in Medicine, 14(21‐22), 2433–2443.
   PubMed Web of Science ®Google Scholar
• Besag, J., York, J. and Mollié, A. (1991) Bayesian image restoration, with two applications in spatial statistics. Annals of the Institute of Statistical Mathematics, 43(1), 1–20.
   Web of Science ®Google Scholar
• Bian, L., Thompson, S.M. and Shamsaei, N. (2015) Mechanical properties and microstructural features of direct laser-deposited Ti-6Al-4V. JOM, 67(3), 629–638.
   Web of Science ®Google Scholar
• Birant, D. and Kut, A. (2007) ST-DBSCAN: An algorithm for clustering spatial–temporal data. Data & Knowledge Engineering, 60(1), 208–221.
   Web of Science ®Google Scholar
• Brandl, E., Schoberth, A. and Leyens, C. (2012) Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM). Materials Science and Engineering: A, 532, 295–307.
   Web of Science ®Google Scholar
• Craeghs, T., Clijsters, S., Kruth, J.-P., Bechmann, F. and Ebert, M.-C. (2012) Detection of process failures in layerwise laser melting with optical process monitoring. Physics Procedia, 39, 753–759.
   Google Scholar
• Cressie, N.A. (1993) Statistics for spatial data. Wiley Online Library.
   Google Scholar
• Ding, J., Colegrove, P., Mehnen, J., Ganguly, S., Almeida, P.S., Wang, F. and Williams, S. (2011) Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts. Computational Materials Science, 50(12), 3315–3322.
   Web of Science ®Google Scholar
• Ding, R., Guo, Z. and Wilson, A. (2002) Microstructural evolution of a Ti–6Al–4V alloy during thermomechanical processing. Materials Science and Engineering: A, 327(2), 233–245.
   Web of Science ®Google Scholar
• Foroozmehr, A., Badrossamay, M. and Foroozmehr, E. (2016) Finite element simulation of selective laser melting process considering optical penetration depth of laser in powder bed. Materials & Design, 89, 255–263.
   Web of Science ®Google Scholar
• Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C.B., Wang, C.C., Shin, Y.C., Zhang, S. and Zavattieri, P.D. (2015) The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design, 69, 65–89.
   Web of Science ®Google Scholar
• Gong, H., Rafi, K., Gu, H., Ram, G.J., Starr, T. and Stucker, B. (2015) Influence of defects on mechanical properties of Ti–6Al–4 V components produced by selective laser melting and electron beam melting. Materials & Design, 86, 545–554.
   Web of Science ®Google Scholar
• Gong, H., Rafi, K., Gu, H., Starr, T. and Stucker, B. (2014) Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes. Additive Manufacturing, 1, 87–98.
   Google Scholar
• Grasso, M., Demir, A., Previtali, B. and Colosimo, B. (2018) In situ monitoring of selective laser melting of zinc powder via infrared imaging of the process plume. Robotics and Computer-Integrated Manufacturing, 49, 229–239.
   Web of Science ®Google Scholar
• Heigel, J., Michaleris, P. and Reutzel, E. (2015) Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti–6Al–4V. Additive Manufacturing, 5, 9–19.
   Web of Science ®Google Scholar
• Hu, D. and Kovacevic, R. (2003) Sensing, modeling and control for laser-based additive manufacturing. International Journal of Machine Tools and Manufacture, 43(1), 51–60.
   Web of Science ®Google Scholar
• Huang, Q. (2016) An analytical foundation for optimal compensation of three-dimensional shape deformation in additive manufacturing. Journal of Manufacturing Science and Engineering, 138(6), 061010.
   Web of Science ®Google Scholar
• Huang, Q., Nouri, H., Xu, K., Chen, Y., Sosina, S. and Dasgupta, T. (2014a) Predictive modeling of geometric deviations of 3D printed products-a unified modeling approach for cylindrical and polygon shapes, in Proceedings of the IEEE International Conference on Automation Science and Engineering,IEEE Press Piscataway, NJ, pp. 25–30.
   Google Scholar
• Huang, Q., Nouri, H., Xu, K., Chen, Y., Sosina, S. and Dasgupta, T. (2014b) Statistical predictive modeling and compensation of geometric deviations of three-dimensional printed products. Journal of Manufacturing Science and Engineering, 136(6), 061008.
   Web of Science ®Google Scholar
• Huang, Q., Zhang, J., Sabbaghi, A. and Dasgupta, T. (2015) Optimal offline compensation of shape shrinkage for three-dimensional printing processes. IIE Transactions, 47(5), 431–441.
   Web of Science ®Google Scholar
• Huang, W., Lin, J., Bezdecny, M., Kong, Z. and Ceglarek, D. (2007) Stream-of-variation modeling—part I: A generic three-dimensional variation model for rigid-body assembly in single station assembly processes. Journal of Manufacturing Science and Engineering, 129(4), 821–831.
   Web of Science ®Google Scholar
• Huang, W., Lin, J., Kong, Z. and Ceglarek, D. (2007) Stream-of-variation (SOVA) modeling II: A generic 3D variation model for rigid body assembly in multistation assembly processes. Journal of Manufacturing Science and Engineering, 129(4), 832–842.
   Web of Science ®Google Scholar
• Islam, M., Purtonen, T., Piili, H., Salminen, A. and Nyrhilä, O. (2013) Temperature profile and imaging analysis of laser additive manufacturing of stainless steel. Physics Procedia, 41, 835–842.
   Google Scholar
• Jin, Y., Qin, S.J. and Huang, Q. (2016) Offline predictive control of out-of-plane shape deformation for additive manufacturing. Journal of Manufacturing Science and Engineering, 138(12), 121005.
   Web of Science ®Google Scholar
• Khairallah, S.A., Anderson, A.T., Rubenchik, A. and King, W.E. (2016) Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia, 108, 36–45.
   Web of Science ®Google Scholar
• Khanzadeh, M., Bian, L., Shamsaei, N. and Thompson, S.M. (2016) Porosity detection of laser based additive manufacturing using melt pool morphology clustering, in Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium: An Additive Manufacturing Conference, pp. 1487–1494, University of Texas at Austin, Austin, Texas.
   Google Scholar
• Khanzadeh, M., Chowdhury, S., Marufuzzaman, M., Tschopp, M.A. and Bian, L. (2018) Porosity prediction: Supervised-learning of thermal history for direct laser deposition. Journal of Manufacturing Systems, 47, 69–82.
   Web of Science ®Google Scholar
• Khanzadeh, M., Chowdhury, S., Tschopp, M.A., Doude, H.R., Marufuzzaman, M. and Bian, L. (2019) In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes. IISE Transactions, 51(5), 437–455.
   Web of Science ®Google Scholar
• Khanzadeh, M., Tian, W., Yadollahi, A., Doude, H.R., Tschopp, M.A. and Bian, L. (2018) Dual process monitoring of metal-based additive manufacturing using tensor decomposition of thermal image streams. Additive Manufacturing, 23, 443–456.
   Web of Science ®Google Scholar
• Knorr‐Held, L. (2000) Bayesian modelling of inseparable space‐time variation in disease risk. Statistics in Medicine, 19(17‐18), 2555–2567.
   PubMed Web of Science ®Google Scholar
• Lee, D., Rushworth, A. and Napier, G. (2018) Spatio-temporal areal unit modelling in R with Conditional autoregressive priors using the CARBayesST package. Journal of Statistical Software, 84(9).
   Web of Science ®Google Scholar
• Li, Y. and Gu, D. (2014) Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder. Materials & Design, 63, 856–867.
   Web of Science ®Google Scholar
• Liu, J., Liu, C., Bai, Y., Rao, P., Williams, C. and Kong, Z. (2019) Layer-wise spatial modeling of porosity in additive manufacturing. IISE Transactions, 51(2), 109–123.
   Web of Science ®Google Scholar
• Luan, H. and Huang, Q. (2017) Prescriptive modeling and compensation of in-plane shape deformation for 3-D printed freeform products. IEEE Transactions on Automation Science and Engineering, 14(1), 73–82.
   Web of Science ®Google Scholar
• Luo, W., Yuan, L., Wu, M. and Yu, Z. (2010) Spatial-temporal data analysis with spacetime algebra: A case study with satellite altimetry data, in Proceedings of the 18th International Conference on Geoinformatics, IEEE Press, Piscataway, NJ, pp. 1–5.
   Google Scholar
• Mahmoudi, M., Ezzat, A. A. and Elwany, A. (2019) Layer-wise anomaly detection in laser powder-bed fusion metal additive manufacturing. Journal of Manufacturing Science and Engineering, 141(3) 031002.
   Web of Science ®Google Scholar
• Marshall, G.J., Thompson, S.M. and Shamsaei, N. (2016) Data indicating temperature response of Ti–6Al–4V thin-walled structure during its additive manufacture via laser engineered net shaping. Data in Brief, 7, 697–703.
   Web of Science ®Google Scholar
• Marshall, G.J., Young, W.J., Thompson, S.M., Shamsaei, N., Daniewicz, S.R. and Shao, S. (2016) Understanding the microstructure formation of Ti-6Al-4V during direct laser deposition via in-situ thermal monitoring. JOM, 68(3),. 778–790.
   Web of Science ®Google Scholar
• Meola, C. and Carlomagno, G.M. (2014) Infrared thermography to evaluate impact damage in glass/epoxy with manufacturing defects. International Journal of Impact Engineering, 67, 1–11.
   Web of Science ®Google Scholar
• Merklein, M. and Lechler, J. (2006) Investigation of the thermo-mechanical properties of hot stamping steels. Journal of Materials Processing Technology, 177(1-3), 452–455.
   Web of Science ®Google Scholar
• Michaleris, P. (2014) Modeling metal deposition in heat transfer analyses of additive manufacturing processes. Finite Elements in Analysis and Design, 86, 51–60.
   Web of Science ®Google Scholar
• Montazeri, M., Yavari, R., Rao, P. and Boulware, P. (2018) In-process monitoring of material cross-contamination defects in laser powder bed fusion. Journal of Manufacturing Science and Engineering, 140(11), 111001.
   Web of Science ®Google Scholar
• Napier, G., Lee, D., Robertson, C., Lawson, A. and Pollock, K.G. (2016) A model to estimate the impact of changes in MMR vaccine uptake on inequalities in measles susceptibility in Scotland. Statistical Methods in Medical Research, 25(4), 1185–1200.
   Web of Science ®Google Scholar
• Rao, P.K., Kong, Z., Duty, C.E., Smith, R.J., Kunc, V. and Love, L.J. (2016) Assessment of dimensional integrity and spatial defect localization in additive manufacturing using spectral graph theory. Journal of Manufacturing Science and Engineering, 138(5), 051007.
   Web of Science ®Google Scholar
• Rao, P.K., Liu, J.P., Roberson, D., Kong, Z.J. and Williams, C. (2015) Online real-time quality monitoring in additive manufacturing processes using heterogeneous sensors. Journal of Manufacturing Science and Engineering, 137(6), 061007.
   Web of Science ®Google Scholar
• Roberts, I.A., Wang, C., Esterlein, R., Stanford, M. and Mynors, D. (2009) A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing. International Journal of Machine Tools and Manufacture, 49(12-13), 916–923.
   Web of Science ®Google Scholar
• Rushworth, A., Lee, D. and Mitchell, R. (2014) A spatio-temporal model for estimating the long-term effects of air pollution on respiratory hospital admissions in Greater London. Spatial and Spatio-Temporal Epidemiology, 10, 29–38.
   Google Scholar
• Rushworth, A., Lee, D. and Sarran, C. (2017) An adaptive spatiotemporal smoothing model for estimating trends and step changes in disease risk. Journal of the Royal Statistical Society: Series C (Applied Statistics), 66(1), 141–157.
   Web of Science ®Google Scholar
• Sabbaghi, A., Huang, Q. and Dasgupta, T. (2018) Bayesian model building from small samples of disparate data for capturing in-plane deviation in additive manufacturing. Technometrics, 60(4), 532–544.
   Web of Science ®Google Scholar
• Shamsaei, N., Yadollahi, A., Bian, L. and Thompson, S.M. (2015) An overview of direct laser deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control. Additive Manufacturing, 8, 12–35.
   Web of Science ®Google Scholar
• Sterling, A.J., Torries, B., Shamsaei, N., Thompson, S.M. and Seely, D.W. (2016) Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V. Materials Science and Engineering: A, 655,100–112.
   Web of Science ®Google Scholar
• Straub, J. (2015) Initial work on the characterization of additive manufacturing (3D printing) using software image analysis. Machines, 3(2), 55–71.
   Web of Science ®Google Scholar
• Szost, B.A., Terzi, S., Martina, F., Boisselier, D., Prytuliak, A., Pirling, T., Hofmann, M. and Jarvis, D.J. (2016) A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components. Materials & Design, 89 pp. 559–567.
   Web of Science ®Google Scholar
• Taheri, H., Shoaib, M. M., Koester, L. W., Bigelow, T. A., Collins, P. C., and Bond, L. J., (2017) Powder based additive manufacturing-A review of types of defects, generation mechanisms, detection, property evaluation and metrology. International Journal of Additive and Subtractive Materials Manufacturing, 1(2), 172–209.
   Google Scholar
• Tang, L. and Landers, R.G. (2010) Melt pool temperature control for laser metal deposition processes—Part I: Online temperature control. Journal of Manufacturing Science and Engineering, 132(1), 011010.
   Web of Science ®Google Scholar
• Thompson, S.M., Bian, L., Shamsaei, N. and Yadollahi, A. (2015) An overview of direct laser deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics. Additive Manufacturing, 8, 36–62.
   Web of Science ®Google Scholar
• Tootooni, M.S., Dsouza, A., Donovan, R., Rao, P.K., Kong, Z.J. and Borgesen, P. (2017) Classifying the dimensional variation in additive manufactured parts from laser-scanned three-dimensional point cloud data using machine learning approaches. Journal of Manufacturing Science and Engineering, 139(9), 091005.
   Web of Science ®Google Scholar
• Vasinonta, A., Beuth, J.L. and Griffith, M. (2007) Process maps for predicting residual stress and melt pool size in the laser-based fabrication of thin-walled structures. Journal of Manufacturing Science and Engineering, 129(1), 101–109.
   Web of Science ®Google Scholar
• Wang, X., Sun, J. and Bogie, K. (2006) Spatial-temporal data mining procedure: LASR, in Recent Developments in Nonparametric Inference and Probability, pp. 213–231, Institute of Mathematical Statistics, Beachwood, Ohio, USA.
   Google Scholar
• Weman, K. (2011) Welding Processes Handbook. Woodhead Publishing Limited, Sawston, Cambridge, UK.
   Google Scholar
• Wu, B., Ding, D., Pan, Z., Cuiuri, D., Li, H., Han, J. and Fei, Z. (2017) Effects of heat accumulation on the arc characteristics and metal transfer behavior in wire arc additive manufacturing of Ti6Al4V. Journal of Materials Processing Technology, 250, 304–312.
   Web of Science ®Google Scholar
• Zhu, D. (2017) Spatial-temporal difference equations and their application in spatial-temporal data model especially for big data. Journal of Difference Equations and Applications, 23(1-2), 66–87.
   Web of Science ®Google Scholar
• Zhu, Z., Anwer, N. and Mathieu, L. (2017) Deviation modeling and shape transformation in design for additive manufacturing. Procedia CIRP, 60,211–216.
   Google Scholar