Application of the response surface methodology to determine optimal conditions of castine calcination in a full-scale rotary kiln

References

• Barr PV, Brimacombe JK, Watkinson AP. 1989. A heat transfer model for the rotary kiln: part II. Development of the Cross-section model. Metall Trans B. 20:403–419. doi: 10.1007/BF02696992
   Google Scholar
• Bosque-Sendra JM, Pescarolo S, Cuadros-Rodiiguez L, García-Campaña AM, Almansa-López EM. 2001. Optimizing analytical methods using sequential response surface methodology: application to the pararosaniline determination of formaldehyde. Fresenius J Anal Chem. 36:715–718. doi: 10.1007/s002160100751
   Google Scholar
• Bouzaouit, NB. 2012 (in French). Etude par simulations numériques de la réactivité dans la reaction d’acylation enzymatique des substrats oxidioques, UBM Annaba, p.49.
   Google Scholar
• Box GEP, Behnken DW. 1960. Some new three-level design for the study of quantitative variables. Technometrics. 2:455–475. doi: 10.1080/00401706.1960.10489912
   Google Scholar
• Boylu F. 2013. Modelling and optimisation of ageing characteristics of soda activated Na+-bentonites. Appl Clay Sci. 83–84:300–307. doi: 10.1016/j.clay.2013.08.024
   Web of Science ®Google Scholar
• Dhanjal SK, Barr PV, Watkinson AP. 2004. The rotary kiln: an investigation of bed heat transfer in the transverse plane. Metall Trans B. 35:1059–1070. doi: 10.1007/s11663-004-0062-0
   Web of Science ®Google Scholar
• Dirion JL. 2012 (in French). Développement d’outils pour l’optimisation des procédés de valorisation thermique de la biomasse: de la conception d’expériences optimales en analyse thermique à la modélisation des fours tournants. Ph.D thesis, Institut National Polytechnique de Toulouse, France, p. 109.
   Google Scholar
• Dumont G, Belanger PR. 1978. Steady-state study of a titanium dioxide rotary kiln. Ind Eng Chem Process Des Dev. 17:107–114. doi: 10.1021/i260066a001
   Google Scholar
• Fidaros DK, Baxevanou CA, Dritselis CD, Vlachos NS. 2007. Numerical modelling of flow and transport processes in a calciner for cement production. Powder Technol. 171:81–95. doi: 10.1016/j.powtec.2006.09.011
   Web of Science ®Google Scholar
• Gallala W, Gaied ME, Tlili A, Montacer M. 2008. Factors influencing the reactivity of quicklime. Proc Inst Civ Eng - Constr Mater. doi: 10.1680/coma.2008.161.1.25
   Google Scholar
• Goupy J. 1996 (in French). La méthode des plans d’expériences – optimisation du choix des essais et de l’interprétation des résultats, Ed. Paris: Dunod.
   Google Scholar
• Hassibi M. 1999. An overview of lime slaking and factors that affect the process. Paper presented at the 3rd international Sorbalit symposium, New Orleans, November 3–5, 19:1–19.
   Google Scholar
• Hassibi M. 2002. Factors affecting the quality of quicklime (CaO) from mining to manufacturing to usage. Monongahela, Pennsylvania: Chemco Systems, L.P. September 2002.
   Google Scholar
• Job J, Sukumaran RK, Jayachandran K. 2010. Production of a highly glucose tolerant b-glucosidase by Paecilomyces variotii MG3: optimization of fermentation conditions using Plackett–Burman and Box–Behnken experimental designs. World J Microbiol Biotechnol. 26:1385–1391. doi:10.1007/s11274-010-0311-0.
   Web of Science ®Google Scholar
• Kokkılıc O, Langlois R, Waters KE. 2015. A design of experiments investigation into dry separation using a Knelson Concentrator. Miner Eng. 72:73–86. doi: 10.1016/j.mineng.2014.09.025
   Web of Science ®Google Scholar
• Kumar GS, Ramakrishnan A, Hung Y-T. 2007. Lime Calcination. Advanced physicochemical treatment technologies, Volume 5 of the series Handbook of Environmental Engineering, pp. 611–633.
   Google Scholar
• Liu HL, Lan WY, Cheng YC. 2004. Optimal production of sulphuric acid byThiobacillus thiooxidans using response surface methodology. Process Biochem. 39:1953–1961. doi: 10.1016/j.procbio.2003.09.018
   Web of Science ®Google Scholar
• Makokha A, Moys MH, Muumbo AM, Kiprono RJ. 2012. Optimization of in-mill ball loading and slurry solids concentration in grinding. Miner Eng. 39:149–155. doi: 10.1016/j.mineng.2012.05.020
   Web of Science ®Google Scholar
• Mbuya BI, Kime MB, Tshimombo AMD. 2017. Comparative study of approaches based on the Taguchi and ANOVA for optimising the Leaching of Copper–Cobalt flotation tailings. Chem Eng Commun. 204:512–521. doi:10.1080/00986445.2017.1278588.
   Web of Science ®Google Scholar
• McGrath TDH, Staunton WP, Eksteen JJ. 2013. Development of a laboratory test to characterise the behaviour of free gold for use in a combined flash flotation and gravity concentrator model. Miner Eng. 53:276–285. doi: 10.1016/j.mineng.2013.08.004
   Web of Science ®Google Scholar
• Mikulčić H, Von Berg E, Vujanović M, Priesching P, Tatschl R, Duić N. 2013. Numerical analysis of cement calciner fuel efficiency and pollutant emissions. Clean Techn Environ Policy. 15:489–499. doi:10.1007/s10098-013-0607-5.
   Web of Science ®Google Scholar
• Moffat W, Walmsely MRW. 2006. Understanding Lime Calcination Kinetics For Energy Cost Reduction. 59th Appita Conference Auckland New Zealand 2006.
   Google Scholar
• Mohapatra S, Pradhan N, Mohanty S, Sukla LB. 2009. Recovery of nickel from lateritic nickel ore using Aspergillus niger and optimization of parameters. Miner Eng. 22:311–313. doi: 10.1016/j.mineng.2008.08.002
   Web of Science ®Google Scholar
• Mpinga CN, Eksteen J, Aldrich C, Dyer L. 2010. Identification of the significant factors determining extractability of Ni and Cu after sulfation roasting of a PGM-bearing chromitite ore. Miner Eng. 110:153–165. doi: 10.1016/j.mineng.2017.04.019
   Google Scholar
• Piton M. 2015. Récupération de la chaleur fatale: application aux fours rotatifs. Ph.D thesis, Ingénierie de l’Environnement, Ecole des Mines de Nantes, France.
   Google Scholar
• Plackett RL, Burman JP. 1946. The design of optimum multifactorial experiments. Biometrika. 33:305–325. doi: 10.1093/biomet/33.4.305
   Web of Science ®Google Scholar
• Thammavong P, Debacq M, Vitu S, Dupoizat M. 2011. Experimental apparatus for studying heat transfer in Externally heated rotary kilns. Chem Eng Technol. 34:707–717. doi: 10.1002/ceat.201000391
   Web of Science ®Google Scholar
• Torralvo FA, Fernandez-Pereira C. 2011. Recovery of germanium from real fly ash leachates by ion-exchange extraction. Miner Eng. 24:35–41. doi: 10.1016/j.mineng.2010.09.004
   Web of Science ®Google Scholar
• Tripathy SK, Murthy YR. 2012. Modeling and optimization of spiral concentrator for separation of ultrafine chromite. Powder Technol. 221:387–394. doi: 10.1016/j.powtec.2012.01.035
   Web of Science ®Google Scholar
• Tumay Ozer E, Gucer S. 2011. Central composite design for the optimisation of Cd and Pb determination in PVC materials by atomic absorption spectrometry after Kjeldahl digestion. Polym Testing. 30:773–778. doi: 10.1016/j.polymertesting.2011.06.007
   Web of Science ®Google Scholar
• Válek J, van Halem E, Viani A, Pérez-Estébanez M, Ševčík R, Šašek P. 2014. Determination of optimal burning temperature ranges for production of natural hydraulic limes. Constr Build Mater. 66:771–780. doi: 10.1016/j.conbuildmat.2014.06.015
   Web of Science ®Google Scholar
• Wannachod T, Phuphaibul P, Mohdee V, Pancharoen U, Phatanasri S. 2015. Optimization of synergistic extraction of neodymium ions from monazite leach solution treatment via HFSLM using response surface methodology. Miner Eng. 77:1–9. doi: 10.1016/j.mineng.2015.01.016
   Web of Science ®Google Scholar
• Watkinson AP, Brimacombe JK. 1982. Limestone calcination in a rotary kiln. Metall Trans B. 13(3):369–378. doi:10.1007/BF02667752.
   Google Scholar
• Yaghobi Moghaddam M, Ranjbar M, Manafi Z, Schaffie M, Jahani M. 2012. Modeling and optimizing bacterial leaching process parameters to increase copper extraction from a low-grade ore. Miner. Eng. 32:5–7. doi: 10.1016/j.mineng.2012.03.008
   Web of Science ®Google Scholar
• Yi S, Su Y, Qi B, Su Z, Wan Y. 2010. Application of response surface methodology and central composite rotatable design in optimizing the preparation conditions of vinyltriethoxysilane modified silicalite/polydimethyl-siloxane hybrid pervaporation membranes. Sep Purif Technol. 71:252–262. doi: 10.1016/j.seppur.2009.12.005
   Web of Science ®Google Scholar
• Zolgharnein J, Bagtash M, Asanjarani N. 2014. Hybrid central composite design approach for simultaneous optimization of removal of alizarin red S and indigo carmine dyes using cetyltrimethylammonium bromide-modified TiO2 nanoparticles. J Environ Chem Eng. 2(2):988–1000. doi: 10.1016/j.jece.2014.03.017
   Google Scholar