Non-isothermal cure kinetics of aerogel/epoxy composites using differential scanning calorimetry

References

• Koravos, J.; Norwood, C.; Pescatore, P.; Pidhurney, J. Aerogel Insulative Coatings: New Coating Technology Offers Personnel Protection. http://www.pcimag.com/articles/98016-aerogel-insulative-coatings (accessed Feb 12, 2016).
   Google Scholar
• Jin, L.; Li, P.; Zhou, H.; Zhang, W.; Zhou, G.; Wang, C. Improving Thermal Insulation of TC4 Using YSZ-Based Coating and SiO2 Aerogel. Prog. Nat. Sci. Mater. Int.. 2015, 25(2), 141–146. DOI: 10.1016/j.pnsc.2015.03.006.
   Web of Science ®Google Scholar
• Kistler, S. S.;. Coherent Expanded Aerogels and Jellies. Nature. 1931, 127(3211), 741. DOI: 10.1038/127741a0.
   Google Scholar
• Yuan, B.; Ding, S.; Wang, D.; Wang, G.; Li, H. Heat Insulation Properties of Silica Aerogel/Glass Fiber Composites Fabricated by Press Forming. Mater. Lett.. 2012, 75, 204–206. DOI: 10.1016/j.matlet.2012.01.114.
   Web of Science ®Google Scholar
• Hrubesh, L. W.;. Aerogel Applications. J. Non. Cryst. Solids. 1998, 225, 335–342. DOI: 10.1016/S0022-3093(98)00135-5.
   Web of Science ®Google Scholar
• Schmidt, M.; Schwertfeger, F. Applications for Silica Aerogel Products. J. Non. Cryst. Solids. 1998, 225, 364–368. DOI: 10.1016/S0022-3093(98)00054-4.
   Web of Science ®Google Scholar
• Baetens, R.; Petter Jelle, B.; Gustavsen, A. Aerogel Insulation for Building Applications: A State-of-the-Art Review. Energy Build. 2011, 43(4), 761–769. DOI: 10.1016/j.enbuild.2010.12.012.
   Web of Science ®Google Scholar
• Kim, H. M.; Kim, H. S.; Kim, S. Y.; Youn, J. R. Silica Aerogel/Epoxy Composites with Preserved Aerogel Pores and Low Thermal Conductivity. e-Polymers. 2015, 15(2). DOI: 10.1515/epoly-2014-0165.
   Web of Science ®Google Scholar
• Kim, G. S.; Hyun, S. H. Effect of Mixing on Thermal and Mechanical Properties of Aerogel-PVB Composites. J. Mater. Sci.. 2003, 38(9), 1961–1966. DOI: 10.1023/A:1023560601911.
   Web of Science ®Google Scholar
• Wei, T.-Y.; Lu, S.-Y.; Chang, Y.-C.; Transparent, H. Composite Aerogels with High Mechanical Strength and Low High-Temperature Thermal Conductivities. J. Phys. Chem. B. 2008, 112(38), 11881–11886.
   Web of Science ®Google Scholar
• Meador, M. A. B.; Fabrizio, E. F.; Ilhan, F.; Dass, A.; Zhang, G.; Vassilaras, P.; Johnston, J. C.; Leventis, N. Cross-Linking Amine-Modified Silica Aerogels with Epoxies: Mechanically Strong Lightweight Porous Materials. Chem. Mater.. 2005, 17(5), 1085–1098. DOI: 10.1021/cm048063u.
   Web of Science ®Google Scholar
• Ivankovic, M.; Brnardic, I.; Ivankovic, H.; Mencer, H. J. DSC Study of the Cure Kinetics during Nanocomposite Formation: Epoxy/Poly(Oxypropylene) Diamine/Organically Modified Montmorillonite System. J. Appl. Polym. Sci.. 2006, 99, 550–557. DOI: 10.1002/(ISSN)1097-4628.
   Web of Science ®Google Scholar
• Hayaty, M.; Beheshty, M. H.; Esfandeh, M. Isothermal Differential Scanning Calorimetry Study of a Glass/Epoxy Prepreg. Polym. Adv. Technol.. 2011, 22(6), 1001–1006. DOI: 10.1002/pat.v22.6.
   Web of Science ®Google Scholar
• Montserrat, S.; Malek, J. A Kinetic Analysis of the Curing Reaction of an Epoxy Resin. Thermochim. Acta. 1993, 228(C), 47–60. DOI: 10.1016/0040-6031(93)80273-D.
   Google Scholar
• Gonis, J.; Simon, G. P.; Cook, W. D. Cure Properties of Epoxies with Varying Chain Length as Studied by DSC. J. Appl. Polym. Sci.. 1999, 72(11), 1479–1488. DOI: 10.1002/(ISSN)1097-4628.
   Web of Science ®Google Scholar
• Roçu, D.; Caçcaval, C. N.; Mustaça, F.; Ciobanu, C. Cure Kinetics of Epoxy Resins Studied by Non Isothermal DSC Data. Thermochim. Acta. 2002, 383, 119–127. DOI: 10.1016/S0040-6031(01)00672-4.
   Web of Science ®Google Scholar
• Sbirrazzuoli, N.; Vyazovkin, S. Learning about Epoxy Cure Mechanisms from Isoconversional Analysis of DSC Data. Thermochim. Acta. 2002, 388(1–2), 289–298. DOI: 10.1016/S0040-6031(02)00053-9.
   Web of Science ®Google Scholar
• Yoo, M. J.; Kim, S. H.; Park, S. D.; Lee, W. S.; Sun, J. W.; Choi, J. H.; Nahm, S. Investigation of Curing Kinetics of Various Cycloaliphatic Epoxy Resins Using Dynamic Thermal Analysis. Eur. Polym. J.. 2010, 46(5), 1158–1162. DOI: 10.1016/j.eurpolymj.2010.02.001.
   Web of Science ®Google Scholar
• El-Thaher, N.; Mekonnen, T.; Mussone, P.; Bressler, D.; Choi, P. Nonisothermal DSC Study of Epoxy Resins Cured with Hydrolyzed Specified Risk Material. Ind. Eng. Chem. Res.. 2013, 52(24), 8189–8199. DOI: 10.1021/ie400803d.
   Web of Science ®Google Scholar
• Hong, I.-K.; Lee, S. Cure Kinetics and .Modeling the Reaction of Silicone Rubber. J. Ind. Eng. Chem.. 2013, 19(1), 42–47. DOI: 10.1016/j.jiec.2012.05.006.
   Web of Science ®Google Scholar
• Chemie, B. Y. K.;. BYK-P 9920 https://www.byk.com/en/additives/additives-by-name/byk-p-9920.php. (accessed Oct 23, 2017).
   Google Scholar
• Kissinger, H. E.;. Reaction Kinetics in Differential Thermal Analysis. Anal. Chem.. 1957, 29(11), 1702–1706. DOI: 10.1021/ac60131a045.
   Web of Science ®Google Scholar
• Nordeng, S. H.;. Determination of Activation Energy and Frequency Factor for Samples of the Bakken Formation (Miss. – Dev .): Williston Basin, ND. North Dakota Geol. Surv.. 2012, 163, 1–15.
   Google Scholar
• Šesták, J.; Berggren, G. Study of the Kinetics of the Mechanism of Solid-State Reactions at Increasing Temperatures. Thermochim. Acta. 1971, 3(1), 1–12. DOI: 10.1016/0040-6031(71)85051-7.
   Google Scholar
• Pérez-Maqueda, L. A.; Criado, J. M.; Sánchez-Jiménez, P. E. Combined Kinetic Analysis of Solid-State Reactions: A Powerful Tool for the Simultaneous Determination of Kinetic Parameters and the Kinetic Model without Previous Assumptions on the Reaction Mechanism. J. Phys. Chem. A. 2006, 110(45), 12456–12462. DOI: 10.1021/jp0620825.
   Web of Science ®Google Scholar
• Vyazovkin, S.; Burnham, A. K.; Criado, J. M.; Pérez-Maqueda, L. A.; Popescu, C.; Sbirrazzuoli, N. ICTAC Kinetics Committee Recommendations for Performing Kinetic Computations on Thermal Analysis Data. Thermochim. Acta. 2011, 520(1–2), 1–19. DOI: 10.1016/j.tca.2011.03.034.
   Web of Science ®Google Scholar
• Arabli, V.; Aghili, A. The Effect of Silica Nanoparticles, Thermal Stability, and Modeling of the Curing Kinetics of Epoxy/Silica Nanocomposite. Adv. Compos. Mater.. 2015, 24(6), 561–577. DOI: 10.1080/09243046.2014.944254.
   Web of Science ®Google Scholar
• Ellakwa, A. E.; Shortall, A. C.; Marquis, P. M. Influence of Fiber Type and Wetting Agent on the Flexural Properties of an Indirect Fiber Reinforced Composite. J. Prosthet. Dent.. 2002, 88(5), 485–490. DOI: 10.1067/mpr.2002.129303.
   PubMed Web of Science ®Google Scholar