References
- Cho, J. H.; Jae Kim, W.; Gil Lee, C. Texture and Microstructure Evolution and Mechanical Properties during Friction Stir Welding of Extruded Aluminum Billets. Mater. Sci. Eng. A. 2014, 597, 314–323. DOI: https://doi.org/10.1016/j.msea.2013.12.087.
- Khodabakhshi, F.; Haghshenas, M.; Sahraeinejad, S.; Chen, J.; Shalchi, B.; Li, J.; Gerlich, A. P. Microstructure-Property Characterization of a Friction-Stir Welded Joint between AA5059 Aluminum Alloy and High Density Polyethylene. Mater. Charact. 2014, 98, 73–82. DOI: https://doi.org/10.1016/j.matchar.2014.10.013.
- Grujicic, M.; Sellappan, V.; Omar, M. A.; Seyr, N.; Obieglo, A.; Erdmann, M.; Holzleitner, J. An Overview of the Polymer-to-Metal Direct-Adhesion Hybrid Technologies for Load-Bearing Automotive Components. J. Mater. Process. Technol. 2008, 197(1–3), 363–373. DOI: https://doi.org/10.1016/j.jmatprotec.2007.06.058.
- Feraboli, P.; Masini, A. Development of Carbon/Epoxy Structural Components for a High Performance Vehicle. Compos. Part B Eng. 2004, 35(4), 323–330. DOI: https://doi.org/10.1016/j.compositesb.2003.11.010.
- Amanat, N.; James, N. L.; McKenzie, D. R. Welding Methods for Joining Thermoplastic Polymers for the Hermetic Enclosure of Medical Devices. Med. Eng. Phys. 2010, 32(7), 690–699. DOI: https://doi.org/10.1016/j.medengphy.2010.04.011.
- Goushegir, S. M. Friction Spot Joining of Metal-Composite Hybrid Structures. Welding in the World. 2015, 60, 123. https://link.springer.com/article/10.1007/s40194-016-0368-y#article-info
- Amancio-Filho, S. T.; Dos Santos, J. F. Joining of Polymers and Polymer-Metal Hybrid Structures: Recent Developments and Trends. Polym. Eng. Sci. 2009, 49(8), 1461–1476. DOI: https://doi.org/10.1002/pen.21424.
- Kah, P.; Suoranta, R.; Martikainen, J.; Magnus, C. Techniques for Joining Dissimilar Materials: Metals and Polymers. Rev. Adv. Mater. Sci. 2014, 36(2), 152–164.
- Costa, J.; Friction Stir Welding in Dissimilar Joints. 2016, No. November.
- Derazkola, H. A.; Elyasi, M. The Influence of Process Parameters in Friction Stir Welding of Al-Mg Alloy and Polycarbonate. J. Manuf. Process. 2018, 35(May), 88–98. DOI: https://doi.org/10.1016/j.jmapro.2018.07.021.
- Derazkola, H. A.; Kashiry Fard, R.; Khodabakhshi, F. Effects of Processing Parameters on the Characteristics of Dissimilar Friction-Stir-Welded Joints between AA5058 Aluminum Alloy and PMMA Polymer. Weld. World. 2017, 62(1), 117–130. DOI: https://doi.org/10.1007/s40194-017-0517-y.
- Liu, F. C.; Liao, J.; Nakata, K. Joining of Metal to Plastic Using Friction Lap Welding. Mater. Des. 2014, 54, 236–244. DOI: https://doi.org/10.1016/j.matdes.2013.08.056.
- Ratanathavorn, W.; Melander, A. Dissimilar Joining between Aluminium Alloy (AA 6111) and Thermoplastics Using Friction Stir Welding. Sci. Technol. Weld. Join. 2015, 20(3), 222–228. DOI: https://doi.org/10.1179/1362171814Y.0000000276.
- Shahmiri, H.; Movahedi, M.; Kokabi, A. H. Friction Stir Lap Joining of Aluminium Alloy to Polypropylene Sheets. Sci. Technol. Weld. Join. 2017, 22(2), 120–126. DOI: https://doi.org/10.1080/13621718.2016.1204171.
- André, N. M.; Goushegir, S. M.; Dos Santos, J. F.; Canto, L. B.; Amancio-Filho, S. T. Friction Spot Joining of Aluminum Alloy 2024-T3 and Carbon-Fiber-Reinforced Poly(Phenylene Sulfide) Laminate with Additional PPS Film Interlayer: Microstructure, Mechanical Strength and Failure Mechanisms. Compos. Part B Eng. 2016, 94, 197–208. DOI: https://doi.org/10.1016/j.compositesb.2016.03.011.
- Esteves, J. V.; Goushegir, S. M.; Dos Santos, J. F.; Canto, L. B.; Hage, E.; Amancio-Filho, S. T. Friction Spot Joining of Aluminum AA6181-T4 and Carbon Fiber-Reinforced Poly(Phenylene Sulfide): Effects of Process Parameters on the Microstructure and Mechanical Strength. Mater. Des. 2015, 66(PB), 437–445. DOI: https://doi.org/10.1016/j.matdes.2014.06.070.
- Yusof, F.; Miyashita, Y.; Seo, N.; Mutoh, Y.; Moshwan, R. Utilising Friction Spot Joining for Dissimilar Joint between Aluminium Alloy (A5052) and Polyethylene Terephthalate. Sci. Technol. Weld. Join. 2012, 17(7), 544–549. DOI: https://doi.org/10.1179/136217112x13408696326530.
- Yusof, F.; Bin Muhamad, M. R.; Moshwan, R.; Bin Jamaludin, M. F.; Miyashita, Y. Effect of Surface States on Joining Mechanisms and Mechanical Properties of Aluminum Alloy (A5052) and Polyethylene Terephthalate (PET) by Dissimilar Friction Spot Welding. Metals (Basel). 2016, 6(5). DOI: https://doi.org/10.3390/met6050101.
- Huang, Y.; Meng, X.; Xie, Y.; Li, J.; Si, X.; Fan, Q. Improving Mechanical Properties of Composite/Metal Friction Stir Lap Welding Joints via a Taper-Screwed Pin with Triple Facets. J. Mater. Process. Technol. 2018 December, 2019(268), 80–86. doi:https://doi.org/10.1016/j.jmatprotec.2019.01.011.
- Moghanian, A.; Paidar, M.; Seyedafghahi, S. S.; Ojo, O. O. Friction Stir Welding of Pure Magnesium and Polypropylene in a Lap-Joint Configuration: Microstructure and Mechanical Properties. Int. J. Miner. Metall. Mater. 2019, 26(6), 766–774. DOI: https://doi.org/10.1007/s12613-019-1784-y.
- Huang, Y.; Meng, X.; Wang, Y.; Xie, Y.; Zhou, L. Joining of Aluminum Alloy and Polymer via Friction Stir Lap Welding. J. Mater. Process. Technol. 2018, 257(February), 148–154. DOI: https://doi.org/10.1016/j.jmatprotec.2018.02.043.
- Okada, T.; Uchida, S.; Nakata, K. Direct Joining of Aluminum Alloy and Plastic Sheets by Friction Lap Processing. In Knut Marthinsen, Bjorn Holmedal and Yanjun Li (Eds.), Materials Science Forum; Trans Tech Publications Ltd, 2014, Vols. 794–796, pp 395–400. DOI:https://10.4028/www.scientific.net/MSF.794-796.395.
- Wang, T.; Upadhyay, P.; Reza-E-Rabby, M.; Li, X.; Li, L.; Soulami, A.; Kappagantula, K. S.; Whalen, S. Joining of Thermoset Carbon Fiber Reinforced Polymer and AZ31 Magnesium Alloy Sheet via Friction Stir Interlocking. Int. J. Adv. Manuf. Technol. 2020, 109(3–4), 689–698. DOI: https://doi.org/10.1007/s00170-020-05717-9.
- Buffa, G.; Baffari, D.; Campanella, D.; Fratini, L. An Innovative Friction Stir Welding Based Technique to Produce Dissimilar Light Alloys to Thermoplastic Matrix Composite Joints. Procedia Manuf. 2016, 5, 319–331. DOI: https://doi.org/10.1016/j.promfg.2016.08.028.
- Choi, J. W.; Morisada, Y.; Liu, H.; Ushioda, K.; Fujii, H.; Nagatsuka, K.; Nakata, K. Dissimilar Friction Stir Welding of Pure Ti and Carbon Fibre Reinforced Plastic. Sci. Technol. Weld. Join. 2020, 1–9. DOI: https://doi.org/10.1080/13621718.2020.1788814.
- Nagatsuka, K.; Kitagawa, D.; Yamaoka, H.; Nakata, K. Friction Lap Joining of Thermoplastic Materials to Carbon Steel. ISIJ Int. 2016, 56(7), 1226–1231. DOI: https://doi.org/10.2355/isijinternational.ISIJINT-2016-042.
- Nagatsuka, K.; Yoshida, S.; Tsuchiya, A.; Nakata, K. Direct Joining of Carbon-Fiber-Reinforced Plastic to an Aluminum Alloy Using Friction Lap Joining. Compos. Part B Eng. 2015, 73, 82–88. DOI: https://doi.org/10.1016/j.compositesb.2014.12.029.
- Mirabzadeh, R.; Parvaneh, V.; Ehsani, A. Estimating and Optimizing the Flexural Strength of Bonding Welded Polypropylene Sheets by Friction-Stir Welding Method. Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. 2020. DOI: https://doi.org/10.1177/1464420720951972.
- Bevilacqua, M.; Ciarapica, F. E.; D’Orazio, A.; Forcellese, A.; Simoncini, M. Sustainability Analysis of Friction Stir Welding of AA5754 Sheets. Procedia CIRP. 2017, 62, 529–534. DOI: https://doi.org/10.1016/j.procir.2016.06.081.
- Bevilacqua, M.; Ciarapica, F. E.; Forcellese, A.; Simoncini, M. Comparison among the Environmental Impact of Solid State and Fusion Welding Processes in Joining an Aluminium Alloy. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2020, 234(1–2), 140–156. DOI: https://doi.org/10.1177/0954405419845572.
- Azeez, S.; Akinlabi, E. Sustainability of Manufacturing Technology: Friction Stir Welding in Focus. Prog. Ind. Ecol. 2018, 12(4), 419–438. DOI:https://doi.org/10.1504/PIE.2018.097188.
- Derazkola, H. A.; Khodabakhshi, F.; Simchi, A. Friction-Stir Lap-Joining of Aluminium-Magnesium/Poly-Methyl-Methacrylate Hybrid Structures: Thermo-Mechanical Modelling and Experimental Feasibility Study. Sci. Technol. Weld. Join. 2018, 23(1), 35–49. DOI: https://doi.org/10.1080/13621718.2017.1323441.
- Gao, Y.; Morisada, Y.; Fujii, H.; Liao, J. Friction Stir Lap Welding of Plastic to Metal Using Adjustable Tool. Sci. Technol. Weld. Join. 2020, 25(3), 190–197. DOI: https://doi.org/10.1080/13621718.2019.1665858.
- Xu, M.; Liu, B.; Zhao, Y.; Wang, Z.; Dong, Z. Direct Joining of Thermoplastic ABS to Aluminium Alloy 6061-T6 Using Friction Lap Welding. Sci. Technol. Weld. Join. 2020, 25(5), 391–397. DOI: https://doi.org/10.1080/13621718.2020.1719304.
- Wu, L. H.; Nagatsuka, K.; Nakata, K. Direct Joining of Oxygen-Free Copper and Carbon-Fiber-Reinforced Plastic by Friction Lap Joining. J. Mater. Sci. Technol. 2018, 34(1), 192–197. DOI: https://doi.org/10.1016/j.jmst.2017.10.019.