Influence of carbonaceous reinforcements on mechanical and tribological properties of PEEK composites – a review

References

• Quadrini, F.; Squeo, E. A. Injection Moulding of Bushes Made of Tribological PEEK Composites. Express Polym. Lett. 2007, 1(12), No.12. 817–823. DOI: https://doi.org/10.3144/expresspolymlett.2007.113.
   Google Scholar
• Nagasundaram, N.; Suruthi Devi, R.; Karuppaiah, M. K.; Sakthivel Rajan, K.; Arravind, R. Experimental Investigation of Injection Moulding Using Thermoplastic Polyurethane. Mater. Today Proc. 2020, 45(9.
   Google Scholar
• Eschbach, L. Non Resorbable Polymers in Bone Surgery. Injury. 2000, 31, 22–27. DOI: https://doi.org/10.1016/S0020-1383(00)80019-4.
   PubMed Web of Science ®Google Scholar
• Shariq, N.; Muhammad, S. Z.; Zohaib, K.; Fahad, S. Applications of Poly Ether Ether Ketone (PEEK) in Oral Implantology and Prosthodontics. J prosthodontics res. 2015.
   Web of Science ®Google Scholar
• Steven, M. K. An Overview of PEEK Biomaterials. Hand Book. Elsvier.inc. 2019, 1(1), 3–9.
   Google Scholar
• Alotaibi, K. B.; Naudi, D. I., and Ayoubl, A. F. The Current State of Peek Implant Osseointegration and Future Perspectives: A Systematic Review. European Cells and Materials. pages. 2020, 40, 1–20.
   PubMed Web of Science ®Google Scholar
• Jakub, S.; Sylwester, S.; Mariusz, K. The Application of Composite Materials in the Aerospace Industry. J. Technol. Exploitation. 2019, 5(1), 1–6
   Google Scholar
• Yingshuang, S.; Yunping, Z.; Yifan, L.; Ye, Z.; Zhenhua, J.; Haibo, Z. The Effect of Micron-graphite Particle Size on the Mechanical and Tribological Properties of PEEK Composites. High Perform. Polym. 2017, -1-8. DOI: https://doi.org/10.1177/0954008316685410.
   Google Scholar
• Lilong, Y.; Shuling, Z.; Zheng, C., and Yunliang, G. Design and Preparation of Graphene/poly(ether Ether Ketone) Composites with Excellent Electrical Conductivity. J. Mater. Sci. 2014, 49, 2372–2382.
   Google Scholar
• Shukushima, S.; Nishikawa, S.; Matsumoto, Y.; Hibino, Y. Nuclear Instruments and Methods in Physics Research.1993, B 80-81.1119.
   Google Scholar
• Rothon, R. N. Adv. Polymer. Sci. 1999. Mineral Fillers in Thermoplastics: Filler Manufacture and Characterisation, 139, 67.
   Web of Science ®Google Scholar
• Rothon, R. N. Adhesion.1997. Vol. 64, P. 87.
   Google Scholar
• Pooja, B.; Alka, G. Carbon Fibres: Production, Properties and Potential Use. Mat. Sci. Res. India. 2017, 14(1), 52–57. DOI: https://doi.org/10.13005/msri/140109.
   Google Scholar
• Chengce, Y.; Dazhi, L.; Xueyu, Y.; Li, L.; Yudong, H. Preparation of Semi-aliphatic Polyimide for Organic-solvent-free Sizing Agent in CF/ PEEK Composites. Compos. Sci. Technol. 2021, 201, 108490. 5 January DOI: https://doi.org/10.1016/j.compscitech.2020.108490.
   Web of Science ®Google Scholar
• Li, J.; Zhang, L. Q. Carbon Nanotube as a Reinforcing Additive for PEEK Composite Filled with Carbon Fiber. Mater. Sci. Technol. 2011, 27(1), 252–256. DOI: https://doi.org/10.1179/174328409X453226.
   Web of Science ®Google Scholar
• Bo, W.; Ke, Z.; Caihua, Z.; Mingfa, R.; Yuantong, G.; Tong, L. Engineering the Mechanical Properties of CNT/ PEEK Nano Composites. RSC Adv. 2019, 9(23), 12836–12845. DOI: https://doi.org/10.1039/C9RA01212E.
   Web of Science ®Google Scholar
• Hwang, Y.; Kim, M.; Kim, J. Improvement of the Mechanical Properties and Thermal Conductivity of Poly(ether-ether-ketone) with the Addition of Graphene Oxide-carbon Nanotube Hybrid Fillers. Appl. Sci. Manuf. 2013, 55, 195.
   Web of Science ®Google Scholar
• Alvaredo, A.; Martin, M. I.; Castell, P.; Guzmán de Villoria, R.; Fernández-Blázquez, J. Non-Isothermal Crystallization Behavior of PEEK/Graphene Nanoplatelets Composites from Melt and Glass States. Polymers. 2019, 11(1), 124. DOI: https://doi.org/10.3390/polym11010124.
   Web of Science ®Google Scholar
• Yu, F.; Xiao, L. H., and Li, M. Non-isothermal crystallization kinetic behavior of graphene reinforced poly(ether ether ketone) nanocomposites. Polymer Crystallization. 2018, 10032, 1.
   Google Scholar
• Ana, M. M. N.; Carlos, M.; Gary, E.; Marian, A. High-performance Nano Composites Based on Poly Ether Ketones. Prog.Mater Sci. 2012, 57.
   Google Scholar
• Zhang, Z.; Breidt, C.; Chang, L.; Friedrich, K. Wear of PEEK Composites Related to Their Mechanical Performances. Tribol. Int. 2004, 37(3), 271–277. DOI: https://doi.org/10.1016/j.triboint.2003.09.005.
   Web of Science ®Google Scholar
• Sarasua, J. R.; Remiro, P. M.; Pouyet, J. Remiro.P.M.The Mechanical Behaviour of PEEK Short Fibre Composites. J. Mater. Sci. 1995, 30(13), 3501–3508. DOI: https://doi.org/10.1007/BF00349901.
   Web of Science ®Google Scholar
• Lauchlin, A. R.; Ghita, O. R., and Savage, L. Studies on the Reprocessability of Poly(ether Ether Ketone) (PEEK). Journal of Materials Processing Technology. 2014, 214, 75–80.
   Web of Science ®Google Scholar
• Siddiq, A.; Kennedy, A. R. Compression Moulding and Injection over Moulding of Porous PEEK Components. J. Mech. Behav. Biomed. Mater. 2020.111.103996.
   Web of Science ®Google Scholar
• Stefan, S.; Steffen, B.; Ulrike, M.; Matthias, V.; Robert, S., et al. Carbon-fibre-reinforced PEEK: An Alternative Material for Flexion Bushings of Rotating Hinged Knee Joints. J. Mech. Behav. Biomed. Mater. 2020, 101.103434.
   Web of Science ®Google Scholar
• Xianqiang, P.; Klaus, F. Erosive Wear Properties of Unidirectional Carbon Fiber Reinforced PEEK Composites. Tribol. Int. 2012, 55.135–140.
   Web of Science ®Google Scholar
• Zhao, P. H.; Ji, N. L.; Yi, H. F.; Fang, F. J. Study on Constitutive Model and Deformation Mechanism in High Speed Cutting Inconel 718. Arch. Civil Mech. Eng. 2019, 19, Issue 2, March, Pages, 439–452, https://doi.org/10.1016/j.acme.2018.11.009
   Web of Science ®Google Scholar
• Beibei, C.; Jianzhang, W.; Fengyuan, Y. Comparative Investigation on the Tribological Behaviors of CF/PEEK Composites under Sea Water Lubrication. Tribol. Int. 2012, 52.170–177.
   Web of Science ®Google Scholar
• Tomonaga, O.; Masahiko, O.; Haruo, M.; Tetsuya, K. Effect of Gas Environment on Friction Behaviour and Tribo Film Formation of PEEK/Carbon Fiber Composite. Tribol. Trans. 2013, 56(4), 607–614. DOI: https://doi.org/10.1080/10402004.2012.745104.
   Web of Science ®Google Scholar
• Jiqiang, H.; Ankang, L.; Shaowei, Z.; Hanqi, Z.; Bing, W.; Huayong, Z.; Zhengong, Z. Novel Panel-core Connection Process and Impact Behaviours of CF/PEEK Thermoplastic Composite Sandwich Structures with Truss Cores. Compos. Struct. compstruct.2020.112659. 2020. DOI: https://doi.org/10.1016/j.compscitech.2020.108565.
   Google Scholar
• Zhao, W.; Yu, R.; Dong, W.; Luan, J.; Wang, G.; Zhang, H.; Zhang, M. M.The Influence of Long Carbon Fiber and Its Orientation on the Properties of Three-dimensional Needle-punched CF/PEEK Composites. Compos. Sci. Technol. 2021, 203, 108565. DOI: https://doi.org/10.1016/j.compscitech.2020.108565.
   Web of Science ®Google Scholar
• Nur, Y., and Ellie, B. Carbon Nanofibers in Cement Composites: Mechanical Reinforcement. Innovative. Developments. Adv. Multifunctional Nano Composites Civil Struct. Eng. 1. 2016, 1, 47–58. UK: Elsevier, Woodhead Publishing.
   Google Scholar
• Yuan, L.; Yaolu, L.; Ning, H. Reinforcement Effects of CNTs for Polymer-Based Nano Composites. Chapters/16993. 2011. DOI: https://doi.org/10.5772/19605.
   Google Scholar
• Toshio, O.; Terumasa, T.; Nobuo, T. Stress–strain Behavior of Multi-walled Carbon nanotube/PEEK Composites. Compos. Sci. Technol. 2011, 71.73–78.
   Web of Science ®Google Scholar
• Yazdani, N.; Mohanam, V. Carbon Nano-tube and Nanofiber in Cement Mortar: Effect of Age and Dosage Rate. Int. J. Mat. Sci. 2014, 4(2), 45e52. DOI: https://doi.org/10.14355/ijmsci.2014.0402.01.
   Google Scholar
• Mohamed, A. Synthesis, Characterization, and Applications Carbon Nanofiber Carbon-Based Nano Fillers and Their Rubber Nano Composites; Elsvier.Inc, 2019.
   Google Scholar
• In-Yup, J.; Dong, W. C.; Nanjundan, A. K.; Jong, B. B. Functionalization of Carbon Nanotubes; Elsvier.Inc, 2011.
   Google Scholar
• Yanwu, Z.; Shanthi, M.; Weiwei, C.; Xuesong, L.; Ji Won, S.; Potts, J. R.; Ruoff, R. S., et al. Graphene and Graphene Oxide: Synthesis, Properties, and Applications. Adv. Mater. 2010, 22(35), 3906–3924.
   PubMed Web of Science ®Google Scholar
• Wan, Y.; Ko, F. K. Introduction to Nanofiber Materials; Cambridge University Press, 2014.
   Google Scholar
• Mohammed, H.; Al, S., and Uttandaraman, S. Review of the Mechanical Properties of Carbon Nanofiber/polymer Composites. Composites: Part A . 2011, 42, 2126–2142.
   Google Scholar
• Kim, P.; Shi, L.; Majumdar, A.; Mc Euen, P. L. Thermal Transport Measurements of Individual Multi Walled Nanotubes Phys. Rev. Lett. 2001, 87(21). DOI: https://doi.org/10.1103/PhysRevLett.87.215502.
   Google Scholar
• Lee, C.; Wei, X.; Kysar, J. W.; Hone, J. Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene. Science. 2008, 321(5887), 385–388. DOI: https://doi.org/10.1126/science.1157996.
   PubMed Web of Science ®Google Scholar
• kumar, A. Electrical Resistivity of Carbon Fibers and Structural Correlation by Mirage –FTIR Spectroscopy. Indian J. Chem. Technol. 1997, Vol–4.
   Web of Science ®Google Scholar
• Andrew, T. S.; Anna, M. L.; Songshan, Z.; Bin, L.; Luyi, S. Synthesis, Properties, and Applications of Graphene Oxide/reduced Graphene Oxide and Their Nano composites.Nano Materials Science.2019.31–47.
   Google Scholar
• Bhatt, P. Properties of Carbon Fibers; Elsevier Inc, 2017; pp 871.
   Google Scholar
• Morgan, P. Carbon Fibers and Their Composites. 2005, 1, 27. Boca Raton: Taylor and Francis,CRC Press. DOI: https://doi.org/10.1201/9781420028744.
   Google Scholar
• Huisheng, P.; Xuemei, S.; Tao, C. polymer Composites with Carbon Nanotubes in Alignment. Chapters/16998. 2011. DOI: https://doi.org/10.5772/16997.
   Google Scholar
• Ji Won, S.; Richard, D. P.; Jinho, A., and Rodney, S. R. Mechanical Properties of Monolayer Graphene Oxide. ACS nano. 2010, 4(11), 6557–6564. 13 October 2010. www.acsnano.org
   Web of Science ®Google Scholar
• Wenjie, W., and Sanjeeva Murthy, N. Characterization of Nanotube- Reinforced Polymer Composites Carbon Nanotubes - Polymer Nanocomposites Intech open book series. Intech open. 2011, 17 July 2011, DOI: https://doi.org/10.5772/20267/16994.
   Google Scholar
• Choudhary, V.; Gupta, A.; Kuckling, D.; Adler, H.-J. P.; Choudhary, V. Polymer/Carbon Nanotube Nano Composites. Chapters/16990. Colloids and Surfaces. B, Biointerfaces. 2011, 83(2), 204–213. DOI: https://doi.org/10.5772/18423.
   Google Scholar
• Qiang, H.; Hao, X. Elastic Properties of Carbon Nanotubes. Chapters /16989. 2011. DOI: https://doi.org/10.5772/18143.
   Google Scholar
• Lixing, D.; Jun, S. Mechanical Properties of Carbon Nanotubes-Polymer Composites. Chapters/50512. 2016. DOI: https://doi.org/10.5772/62635.
   Google Scholar
• Du, Y.; Yun, G. Z.; Chuankun, J. Carbon Nanotube-Polymer Composites for Energy Storage Applications. Chapters/50819. 2016. DOI: https://doi.org/10.5772/63057.
   Google Scholar
• Ana, M. D. P.; Naffakh, M.; Gonzalez-Domínguez, J. M.; Anson, A.; Martinez-Rubi, Y.; Martinez, M. T.; Simard, B., and Gomez, M. A., et al. High Performance PEEK/carbon Nanotube Composites Compatibilized with Poly sulfones-II. Mechanical and Electrical Properties. Carbon. 2010, 48(12), 3500–3511.
   Web of Science ®Google Scholar
• Kumar, D., and Rajmohan, T. Effect of MWCNT Particles on Wear Loss in Dry Sliding Wear of PEEK Matrix Composites. Materials Today: Proceedings, Kanchipuram. 2019, 16. 800–807.
   Google Scholar
• Radovan, Z.; Leah, E. G., and Trevor, C. G. Exp. Methods Orthopaedic Biomech. Pin-on-Disk Wear Testing of Biomaterials Used for Total Joint Replacements, Academic Press, 2017, 1, 299–311 https://doi.org/https://doi.org/10.1016/C2015-0-00572-X.
   Google Scholar
• Khuri Andre l A General Overview of Response Surface Methodology. Biom. Biostat. Int. J. 2017, 5 (3), 87–93. DOI: https://doi.org/10.15406/bbij.2017.05.00133.
   Google Scholar
• Rajmohan, T.; Palanikumar, K.; Davim, J. P.; Arun Premnath, A. Modeling and Optimization in Tribological Parameters of Polyether Ether Ketone Matrix Composites Using D-optimal Design. J. Thermoplast. Compos. Mater. 2014. DOI: https://doi.org/10.1177/0892705713518790.
   Google Scholar
• Hrushikesh, S., and Bhagwan, F. J. Some Studies on Preparation and Mechanical Characterization of Poly-aryl-ether-ketone (PAEK)/MWNT Polymer Nano Composite (PNC). Procedia Manuf. 2018, 20, 79–84.
   Google Scholar
• Parina, P.; Anna, A. S.; Richard, H. T., Mohameed, M, Ana, M.D.P, Gari, E, Natallia, S, Richard, E.L. Flammability Properties of PEEK and Carbon Nanotube Composites. Polym. Degrad. Stab. 2012, 97(12), 2492e2502.
   Google Scholar
• Yang, L. Guoqiang Yu.; et.al.Fabric/multi-walled Carbon Nanotube Sensor for Portable On-site Copper Detection in Water. Adv. Compos. Hybrid Mater. 2019, 711–719. DOI: https://doi.org/10.1007/s42114-019-00122-7.
   Google Scholar
• Zongxiang, W., Xiaofeng, L, Linying, W, Yaping, L, Jinyuan, Q, Peitao, X, Yunpeng, Q, Kai, S, Runhua, F. Flexible Multi-walled Carbon Nanotubes/poly Dimethyl Siloxane Membranous Composites toward High-permittivity Performance. Adv. Compos. Hybrid Mater. 2020, 3(1), 402–414, 2020]. DOI: https://doi.org/10.1007/s42114-020-00144-6.
   Google Scholar
• Hisham, M. K.; Abdeen, E. I. N. Preparation of Sustainable of Eco-friendly MWCNT-geo Polymer Composites with Superior Sulfate Resistance. Adv. Compos. Hybrid Mater. 2020, 1. DOI: https://doi.org/10.1007/s42114-020-00170-4.
   Google Scholar
• Raphael, M. O.; Ahmad, I.; Fabian, I. E. Introductory Chapter: Graphene and Its Applications. Chapters/67265. 2019. DOI: https://doi.org/10.5772/intechopen.86023.
   Google Scholar
• Yuliana E.A.A., Maria, T.R.C, Heriberto, H.C, Gregorio, H.C. Graphene Structures: From Preparations to Applications. Hand Book. 2019, 1 0.1002/97. DOI: https://doi.org/10.1002/9781119468455.ch10.
   Google Scholar
• Jian, R. G. Graphene. Synthesis, Characterization, Properties and Applications E.Book. intechopen. 2011. DOI: https://doi.org/10.5772/1742.
   Google Scholar
• Hao Jie, S.; Na, L.; Yanjie, L.; Chunying, M.; Zhen, W. Preparation and Tribological Properties of Graphene/poly(ether Ether Ketone) Nano Composites. J. Mater. Sci. 2012, 47(17), 6436–6443. DOI: https://doi.org/10.1007/s10853-012-6574-0.
   Web of Science ®Google Scholar
• Arya, T.; Justin, H.; Zhizhong , D.; Meredith, T.; Stephen , T.; Gordon , C.; William , E.M.; Bernard , K.; Thomas , N.; Jennifer, L. Characterization of Melt-blended Graphene – Poly(ether Ether Ketone) Nano Composite. Mater. Sci. Eng. 2016, B216, 41–49. DOI: https://doi.org/10.1016/j.mseb.2016.05.009.
   Google Scholar
• He, M.; Guo, Z.; Qiu, X.; Yang, Y.; Su, C.; Li, Y.; Sun, D.; Zhang, L. Super Tough Graphene Oxide Reinforced Poly Ether Ether Ketone for Potential Hard Tissue Repair Applications. Compos. Sci. Technol. 2019, 174, 194–201.
   Web of Science ®Google Scholar
• Liu, L.; Linghan, X.; Xiuping, Z.; Ming , L.; Yanjie , C.; Lei , S.; Yuhui , A. Improvement of the Thermal Conductivity and Friction Performance of Poly(ether Ether Ketone)/carbon Fiber Laminates by Addition of Graphene. RSC Adv. 2015. DOI: https://doi.org/10.1039/C5RA10722A.
   Google Scholar
• Hwang, Y.; Kim, M.; Kim, J. Improvement of the Mechanical Properties and Thermal Conductivity of Poly (Ether-ether-ketone) with the Addition of Graphene Oxide-carbon Nanotube Hybrid Fillers. Composites: Part A. 2013, 55, 195–202. Pages DOI: https://doi.org/10.1016/j.compositesa.2013.08.010.
   Web of Science ®Google Scholar
• Li, J., and Zhang, L. Q. Carbon Nanotube as a Reinforcing Additive for PEEK Composite Filled with Carbon Fiber. J. Reinf. Plast. Compos. 2009, 29(10/2010), 1523–1533.
   Web of Science ®Google Scholar
• Sofia, E. A., and Lisa, A. P. Nano Mechanical Analysis of Medical Grade PEEK and Carbon Fiber-reinforced PEEK Composites. J. Mech. Behav. Biomed. Mater. 2020, 111, 104008.
   Web of Science ®Google Scholar
• Xulin, Y.; Zicheng, W.; Mingzhen, X.; Rui, Z.; Xiaobo, L. Dramatic Mechanical and Thermal Increments of Thermoplastic Composites by Multi-scale Synergetic Reinforcement: Carbon Fiber and Graphene Nano Platelet. Mater. Des. 2013, 44, 74–80. DOI: https://doi.org/10.1016/j.matdes.2012.07.051.
   Web of Science ®Google Scholar
• Lei, P.; Umut, Y. A. Comparative Study on Mechanical Properties of Carbon fiber/PEEK Composites. Adv. Compos. Mater. 2016, 25(4), 359–374. DOI: https://doi.org/10.1080/09243046.2014.996961.
   Web of Science ®Google Scholar
• Guo, L.; Pei, X.; Zhao, F.; Zhang, L.; Li, G.; Zhang, G. Tribo Film Growth at Sliding Interfaces of PEEK Composites and Steel at Low Velocities. Tribol. Int. 2020, 151, 106456. DOI: https://doi.org/10.1016/j.triboint.2020.106456.
   Web of Science ®Google Scholar
• Jirasak, T.; Tippaban, P., and Narongrit, S. Morphological and Physical Properties and Friction/wear Behavior of h-BN Filled PEEK Composite Coatings. Surf. Coat. Technol. 2015, 273, 20–29.
   Google Scholar
• Jae, H. L.; Hae, L. J.; Kyung, M. L.; Hae, R. B.; Jin, K.; Hong, K. S.; Noh, J. H., and Lee, H.K. In Vitro and in Vivo Evaluation of the Bioactivity of Hydroxyapatite Coated Poly Ether Ether Ketone Bio Composites Created by Cold Spray Technology. Acta Biomater. 2013, 9(4), 6177–6187.
   Web of Science ®Google Scholar
• Juanjuan, Z.; Fang, X., and Dwyer-Joyce, R. S. PEEK Composites as Self-Lubricating Bush Materials for Articulating Revolute Pin Joints. Polymers . 2020, 12, 665.
   Google Scholar
• Xueyu, Y.; Jing, J.; Huawei, W.; Chengce, Y.; Mingqiang , W.; Dawei , Z.; Li, L.; Yudong, H.; Guo, L.G.; Zaixing , J. PAI/MXene Sizing-based Dual Functional Coating for Carbon Fiber/ PEEK Composite. Compos. Sci. Technol. 2021, 108496.
   Web of Science ®Google Scholar
• Klaus, F.; Geraldine, T.; Patrick, K. Polymer Composites For Tribological Applications In A Range Between Liquid Helium And Room Temperature. Polymer Comp. Tribolog. App. Chapter.11. 2009. DOI: https://doi.org/10.1142/9781848162044_0011.
   Google Scholar
• Meghashree, P.; Umesh, M., and Jayashree, B. Tribology of Poly (Ether Ketone) Composites Based on Nano-particles of Solid Lubricants. Compos. Part B . 2020, 201, 108323.
   Web of Science ®Google Scholar
• Liu, L.; Fei, Y.; Fangyuan, G.; Linghan, X; Lei, S; Ming, L, and Yuhui, A. Enhanced Tribological Performance of PEEK/SCF/ PTFE Hybrid Composites by Graphene. RSC Adv. 7, 2017, 7(53), 33450. DOI: https://doi.org/10.1039/C7RA04969B.
   Web of Science ®Google Scholar
• Diaz, C.; Fuentes, G. Tribological Studies Comparison between UHMWPE and PEEK for Prosthesis Application. Surf. Coat. Technol. 2016. DOI: https://doi.org/10.1016/j.surfcoat.2017.07.007.
   Google Scholar
• Nisa, V. S.; Rajesh, S.; Murali, K. P.; Priyadarsini V.; Potty, S.N.; Ratheesh, R. Preparation, Characterization and Dielectric Properties of Temperature Stable SrTiO3/PEEK Composites for Microwave Substrate Applications. Compos. Sci. Technol. 2008, 106–112.
   Web of Science ®Google Scholar
• Rival, G.; Dantras, E., and Paulmier, T. Electronic Irradiation Ageing in the Vicinity of Glass Transition Temperature for PEEK Space Applications. Polym. Degrad. Stab. 2020, 181,109305.
   Web of Science ®Google Scholar
• Neelima, K.; Limaye, P. K.; Soni, N. L.; Patel, R. J. Gamma Irradiation Effects on Thermal, Physical and Tribological Properties of PEEK under Water Lubricated Conditions. Wear. 2015, 342–343(15), 85–91. Pages. DOI: https://doi.org/10.1016/j.wear.2015.08.005.
   Google Scholar
• Puertolas, J. A.; Castro, M.; Morris, J. A.; Rios, R.; Anson cosaos, A. Tribological and Mechanical Properties of Graphene nanoplatelet/PEEK composites.Carbon . 2018, https://doi.org/10.1016/j.carbon.2018.09.036
   Google Scholar
• Leyu, L., and Alois, K. S. Recycled Carbon Fibers as Reinforcements for Hybrid PEEK Composites with Excellent Friction and Wear Performance. Wear. 2019, 432–433, 202928.
   Web of Science ®Google Scholar
• Liwen, M.; Xin, F.; Jiahua, Z.; HUAIYUAN, W.; QINGJIE S, S.; YIJUN, S, and XIAOHUA, L. Comparative Study of Tribological Properties of Different Fibers Reinforced PTFE/PEEK Composites at Elevated Temperatures. Tribol. Trans. 2010, 53(2), 189–194. DOI: https://doi.org/10.1080/10402000903097460.
   Web of Science ®Google Scholar
• Haoyang, S.; Zhengqin, F.; Tao, L.; Fan, L.; Feng, J.; Dandan, L.; Yinghao, Z.; Dazhi, S. Enhanced Mechanical and Tribological Performance of PA66 Nano Composites Containing 2D Layered α-zirconium Phosphate Nanoplatelets with Different Sizes. Adv. Compos. Hybrid Mater. 2019, 407–422. DOI: https://doi.org/10.1007/s42114-019-00100-z.
   Google Scholar
• Vinod, B.; Suresh, S., and Sudhakara, D. Investigation of Biodegradable Hybrid Composites: Effect of Fibers on Tribo-mechanical Characteristics. Adv. Compos. Hybrid Mater. 2020, 3(2), 194–204. 20 April 2020. https://doi.org/https://doi.org/10.1007/s42114-020-00148-2
   Google Scholar
• Hongyun, M.; Angxiu, S.; Jingyuan, Z., and Qiling, Y. peek (Polyether-ether-ketone) and Its Composite Materials in Orthopaedic Implantation. Arabian J. Chem. 2021, 14, 102977.
   Web of Science ®Google Scholar
• Bastan, F. E. Fabrication and Characterization of Electrostatically Bonded PEEK- Hydroxyapatite Composites for Biomedical Applications. Biomed. Mater. Res. 2020, 108, 1–15.
   Web of Science ®Google Scholar
• Patricia, R. M.; Fernanda, V. E.; Luismar, M.P.; Bruno, H.; Antonio, P.N.O.; Fredel, M.C.; Julio, C.M.S. Physicochemical and Biological Assessment of PEEK Composites Embedding Natural Amorphous Silica Fibers for Biomedical Applications. Mater. Sci. Eng. C. 2017. DOI: https://doi.org/10.1016/j.msec.2017.05.031.
   Google Scholar
• Yitong, G.; Shenggui, C.; Jing, W.; Bingheng, L. Medical Applications of Polyether Ether Ketone. Transl. Surg. 2018, 3(1), 12–16. DOI: https://doi.org/10.4103/ts.ts_3_18.
   Google Scholar
• Davood, A.; Nida, I.; Maliheh, S.; Izman, S.; Mohammed, R.; Abdul, K.; Tunku, K. Preparation Methods for Improving PEEK’s Bioactivity for Orthopedic and Dental Application. Int. J. Biomater. 2016, Article ID 8202653 12.
   Google Scholar
• Garcia, G. D.; Rodriguez, M. M.; Rusinek, A.; Arias, A. Investigation of Mechanical Impact Behavior of Short Carbon-fiber-reinforced PEEK Composites. Compos. Struct. 2015. DOI: https://doi.org/10.1016/j.compstruct.2015.08.028.
   Google Scholar
• Go, GT; Pico, D, and Steinmann, W. Polyether Ether Ketone/Carbon Nanotube Composite Fibres – A New Material for Conductive Fiber Reinforced Plastics in Sustainable Energy Applications. Chem. Eng. Trans. 2017, 60, 31–36.
   Google Scholar
• Mohammad, M.; Suong, V. H. Electrical Resistance of CNT-PEEK Composites under Compression at Different Temperatures. Nano Scale Res. Letters. 2011, 6(1), 419. DOI: https://doi.org/10.1186/1556-276X-6-419.
   Google Scholar
• Rival, G.; Paulmier, T., and Dantras, E. Influence of Electronic Irradiations on the Chemical and Structural Properties of PEEK for Space Applications. Polym. Degrad. Stab. 2019, 168, 108943.
   Web of Science ®Google Scholar
• Selina, F.; Hossein, R. M.; Reza, Y.; Nima, H.; Behzad, P. Use of Graphene Substrates for Wastewater Treatment of Textile Industries. Adv. Compos. Hybrid Mater. 2020, 187–193. DOI: https://doi.org/10.1007/s42114-020-00146-4.
   Google Scholar
• Izaskun, B.; Idoia, G.; Isabel, O.; Maria, A.M.; Amaia, Z.; Amaya, O.; Beatriz, A. Free-standing Graphene Films Embedded in Epoxy Resin with Enhanced Thermal Properties. Adv. Compos. Hybrid Mater. 2020, 3.31–40. DOI: https://doi.org/10.1007/s42114-020-00136-6.
   Google Scholar
• Abrar, A.; Pradeep, K. Evaluation of Mechanical, Thermal, and Morphological Properties of PEEK/PEI Matrix Reinforced with Halloysite Nanotubes. Polym. Plast. Technol. Eng. 2021, 60(14), 1557–1567.
   Web of Science ®Google Scholar
• Abrar, A.; Pradeep, K. Mechanical and Thermal Performance of PEEK/PEI Blend Matrix Reinforced with Surface Modified Halloysite Nanotubes. J. Thermoplast. Compos. Mater. 2021, 6, 1–16.
   Google Scholar