References
- Williams, C. The 11 Most Important Metals Used in Medicine. n.d. https://www.starrapid.com/blog/the-6-most-important-metals-used-in-medicine/ (accessed Feb 1, 2024).
- Webster, S. What Do OEMs Need to Consider When Using Ceramics for Medical Devices? https://www.nsmedicaldevices.com/analysis/ceramics-medical-devices/ (accessed Feb 1, 2024).
- George, E. R. An Introduction to Polymeric Materials for Medical Devices. An Introduction to Polymeric Materials for Medical Devices (Meddeviceonline.Com) (accessed Feb 1, 2024).
- Rogers, W. J. Steam and Dry Heat Sterilization of Biomaterials and Medical Devices. In Sterilisation of Biomaterials and Medical Devices, 1st ed.; Lerouge, S. Simmons, A., Eds.; Woodhead Publishing: Oxford, Philadelphia, 2012; pp. 20–55.
- Rogers, W. J. Sterilisation Techniques for Polymers. In Sterilisation of Biomaterials and Medical Devices, 1st ed.; Lerouge, S. Simmons, A., Eds.; Woodhead Publishing: Oxford, Philadelphia, 2012; pp. 151–211.
- Rogers, W. J.;the Effects of Sterilization on Medical Materials and Welded Devices. In Joining and Assembly of Medical Materials and Devices, 1st ed.; Zhou, Y. N. Breyen, M. D., Eds.; Woodhead Publishing: Cambridge, UK, 2013; pp. 79–130.
- Zhang, Y. Z.; Bjursten, L. M.; Freij-Larsson, C.; Kober, M.; Wesslen, B. Tissue Response to Commercial Silicone and Polyurethane Elastomers After Different Sterilization Procedures. Biomaterials 1996, 17(23), 2265–2272. DOI: 10.1016/0142-9612(96)00055-5.
- Rai, R.; Tallawi, M.; Roether, J. A.; Detsch, R.; Barbani, N.; Rosellini, E.; Kaschta, J.; Schubert, D. W.; Boccaccini, A. R. Sterilization Effects on the Physical Properties and Cytotoxicity of Poly (Glycerol Sebacate). Mater. Lett. 2013, 105, 32–35. DOI: 10.1016/j.matlet.2013.04.024.
- Tipnis, N. P.; Burgess, D. J. Sterilization of Implantable Polymer-Based Medical Devices: A Review. Int. J. Pharm. 2018, 544, 455–460. DOI: 10.1016/j.ijpharm.2017.12.003.
- Frick, L. Epoxies for Medical Device Applications. https://www.machinedesign.com/fastening-joining/article/21833540/epoxies-for-medical-device-applications. (accessed Feb 1, 2024).
- MASTERBOND. EP30Med: Utilized As Sensor Encapsulant in Prosthetic Device. https://www.masterbond.com/case-study/ep30med-utilized-sensor-encapsulant-prosthetic-device (accessed Feb 6, 2024).
- EPO-TEK®. Biocompatible/Medical Device Grade Products. https://www.epotek.com/docs/en/Related/EPO-TEK%C2%AE%20Biocompatible%20Medical%20Device%20Grade%20Products.pdf (accessed Feb 6, 2024).
- Joung, Y. Development of Implantable Medical Devices: From an Engineering Perspective. Int. Neurourol. J. 2013, 17(3), 98–106. DOI: 10.5213/inj.2013.17.3.98.
- Baier, R. E.; Meyer, A. E.; Akers, C. K.; Natiella, J. R.; Meenaghan, M.; Carter, J. M. Degradative Effects of Conventional Steam Sterilization on Biomaterial Surfaces. Biomaterials 1982, 3(4), 241–245. DOI: 10.1016/0142-9612(82)90027-8.
- Harrington, R. E.; Guda, T.; Lambert, B.; Martin, J. ed.; Wagner, W. R.; Sakiyama-Elbert, S. E.; Zhang, G. Sterilization and Disinfection of Biomaterials for Medical Devices. In Biomaterials Science, 4th ed.; Yaszemski, M. J., Ed.; Academic Press, an imprint of Elsevier: London, United Kingdom; San Diego, CA, 2020; pp. 1431–1446.
- Mubarak, M. T.; Ozsahin, I.; Ozsahin, D. U. Evaluation of Sterilization Methods for Medical Devices. Adv. Sci. Eng. Technol. Int. Conf 2019, 1–4. DOI: 10.1109/ICASET.2019.8714223.
- Rutala, W. A.; Weber, D. J. Disinfectants Used for Environmental Disinfection and New Room Decontamination Technology. Am. J. Infect. Control 2013, 41(5), S36–S41. DOI: 10.1016/j.ajic.2012.11.006.
- Eveland, R. W. Disinfection and Sterilization with Hydrogen Peroxide. In Block’s Disinfection, Sterilization, and Preservation, 6th ed.; McDonnell, G. Hansen, J., Eds.; Wolters Kluwer: Philadelphia, PA, USA, 2020; pp. 671–683.
- Fu, T. Y.; Gent, P.; Kumar, V. Efficacy, Efficiency and Safety Aspects of Hydrogen Peroxide Vapour and Aerosolized Hydrogen Peroxide Room Disinfection Systems. J. Hosp. Infect. 2012, 80, 199–205. DOI: 10.1016/j.jhin.2011.11.019.
- Pottage, T.; Macken, S.; Giri, K.; Walker, J. T.; Bennett, A. M. Low-Temperature Decontamination with Hydrogen Peroxide or Chlorine Dioxide for Space Applications. Appl. Environ. Microbiol 2012, 78(12), 4169–4174. DOI: 10.1128/AEM.07948-11.
- Meszaros, J. E.; Antloga, K.; Justi, C.; Plesnicher, C.; McDonnell, G. Area Fumigation with Hydrogen Peroxide Vapor. Appl. Biosaf 2005, 10(2), 91–100. DOI: 10.1177/153567600501000206.
- Alfa, M. J.; DeGagne, P.; Olson, N.; Puchalski, T. Comparison of Ion Plasma, Vaporized Hydrogen Peroxide, and 100% Ethylene Oxide Sterilizers to the 12/88 Ethylene Oxide Gas Sterilizer. Infect Control. Hosp Epidemiol 1996, 17(2), 92–100. DOI: 10.1086/647252.
- Association for the Advancement of Medical instrumentation (AAMI). AAMI TIR17: 2017/(R) 2023 Compatability of Materials Subject to Sterilization. Annex E. AAMI 2017.
- STERIS. M4067EN V-PRO Comparison Matrix -MaX2, 60, STERRAD 100NX, STERRAD 100S and STERRAD NX. V-PRO MaX 2 Low Temperature Sterilization System | STERIS. (accessed Feb 6, 2024).
- STERIS. M4176EN V-PRO Family Brochure. V-PRO S2 Low Temperature Sterilization System | STERIS. (accessed Feb 6, 2024).
- Compatability of Medical devices and Materials with Low- Temperature Hydrogen Peroxide Gas Plasma. https://www.mddionline.com/news/compatibility-medical-devices-and-materials-low-temperature-hydrogen-peroxide-gas-plasma (accessed Feb 6, 2024).
- MASTERBOND. Biocompatible Adhesives. https://www.masterbond.com/properties/biocompatible-adhesives. (accessed Feb 1, 2024).
- International organization for Standards (ISO). BS EN ISO 10993-5: 2009 Biological Evaluation of Medical Devices- Tests for in vitro Cytotoxicity. https://compliancenavigator.bsigroup.com/doc/000000000030160958 (accessed Feb 7, 2024).
- STERIS. 10660555 V-PRO S2 LOW Temperature Sterilization System. V-PRO S2 Low Temperature Sterilization System | STERIS (accessed Feb 6, 2024).
- STERIS. 10778508 V-PRO S2 LOW Temperature Sterilization System. V-PRO S2 Low Temperature Sterilization System | STERIS (accessed Feb 6, 2024).
- STERIS. M10425EN-CA V-PRO Consumables Brochure. https://www.steris.com/healthcare/products/v-pro-sterilizers/pro-lite-sterilization-trays#Literature (accessed Feb 6, 2024).
- SYENSQO. Material Considerations for Single-Use Vs Reusable Medical Devices. https://www.solvay.com/en/chemical-categories/specialty-polymers/healthcare/material-considerations-for-single-use-vs-reusable-medical-devices. (accessed Feb 1, 2024).
- Tavakoli, M. The Adhesive Bonding of Medical Devices. The Adhesive Bonding of Medical Devices (Mddionline.Com) (accessed Feb 1, 2024).
- STERIS. What Is Medical Device Reprocessing? https://www.steris.com/healthcare/knowledge-center/infection-prevention/what-is-medical-device-reprocessing (accessed Feb 1, 2024).
- MASTERBOND. Q & A: Adhesive Considerations for Medical Device Manufacturers. https://www.masterbond.com/q-and-a/adhesive-considerations-medical-device-manufacturers (accessed Feb 1, 2024).
- Singh, A. B.; Khandelwal, C.; Dangayach, G. S. Advancements in Healthcare Materials: Unraveling the Impact of Processing Techniques on Biocompatibility and Performance. Polym. Technol. Mater. 2024, 63(12), 1608–1644. DOI: 10.1080/25740881.2024.2350026.
- MASTERBOND. Autoclaving Resistance of Medical Adhesives. https://www.masterbond.com/articles/autoclave-resistance-medical-adhesives (accessed Feb 1, 2024).
- Hirata, N.; Matsumoto, K.-I.; Inishita, T.; Takenaka, Y.; Suma, Y.; Shintani, H. Gamma-Ray Irradiation, Autoclave and Ethylene Oxide Sterilization to Thermosetting Polyurethane: Sterilization to Polyurethane. Radiat. Phys. Chem. 1995, 46(3), 377–381. DOI: 10.1016/0969-806X(94)00134-6.
- Brétagnol, F.; Rauscher, H.; Hasiwa, M.; Kylian, O.; Ceccone, G.; Hazell, L.; Paul, A. J.; Lefranc, O.; Rossi, F. The Effect of Sterilization Processes on the Bioadhesive Properties and Surface Chemistry of a Plasma-Polymerized Polyethylene Glycol Film: XPS Characterization and L929 Cell Proliferation Tests. Acta Biomater 2008, 4(6), 1745–1751. DOI: 10.1016/j.actbio.2008.06.013.
- Nikousaleh, M. A.; Giesen, R. U.; Heim, H. P.; Hartung, M. MC-Injection Molding with Liquid Silicone Rubber (LSR) and Acrylonitrile Butadiene Styrene (ABS) for Medical Technology. Polymers. 2023, 15(19), 3972. DOI: 10.3390/polym15193972.
- Fenton, M. D. Impact of Radiation Processing on Materials and Adhesives Selection. Presented at the Polymers, Laminations and Coatings Conference, Nashville, TN, USA, Sep 15–17, 1986; pp 33–39.
- Ramaraju, H.; McAtee, A. M.; Akman, R. E.; Verga, A. S.; Bocks, M. L.; Hollister, S. J. Sterilization Effects on Poly(glycerol Dodecanedioate): A Biodegradable Shape Memory Elastomer for Biomedical Applications. J. Biomed. Mater. Res. Part B Appl. Biomater. 2023, 111(4), 958–970. DOI: 10.1002/jbm.b.35205.
- Fenton, M. D. Impact of Radiation Processing on Materials and Adhesives Selection. Presented at the Polymers, Laminations and Coatings Conference, Nashville, TN, Sep 15–17, 1986; pp 33–39.
- Nair, P. D. Currently Practised Sterilization Methods–Some Inadvertent Consequences. J. Biomater. Appl. 1995, 10(2), 121–135. DOI: 10.1177/088532829501000203.