Three-dimensional printing of zirconia: characterization of early stage material properties

References

• Ebert J, Özkol E, Zeichner A, et al. Direct inkjet printing of dental prostheses made of zirconia. J Dent Res. 2009;88:673–676.
   Google Scholar
• Wang H, Aboushelib MN, Feilzer AJ. Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater. 2008;24:633–638.
   Google Scholar
• Huang H. Machining characteristics and surface integrity of yttria stabilized tetragonal zirconia in high speed deep grinding. Mater Sci Eng A. 2003;345:155–163.
   Google Scholar
• Barazanchi A, Li KC, Al‐Amleh B, et al. Additive technology: update on current materials and applications in dentistry. J Prosthodont. 2017;26:156–163.
   Google Scholar
• Abduo J, Lyons K, Bennamoun M. Trends in computer-aided manufacturing in prosthodontics: a review of the available streams. Int J Dent. 2014;2014:783948.
   Google Scholar
• Silva N, Witek L, Coelho PG, et al. Additive CAD/CAM process for dental prostheses. J Prosthodont. 2011;20:93–96.
   Google Scholar
• Robert Kelly J. Dental ceramics: current thinking and trends. Dent Clin North Am. 2004;48:513–530.
   Google Scholar
• Al-Amleh B, Lyons K, Swain M. Clinical trials in zirconia: a systematic review. J Oral Rehabil. 2010;37:641.
   Google Scholar
• Le M, Papia E, Larsson C. The clinical success of tooth‐ and implant‐supported zirconia‐based fixed dental prostheses. A systematic review. J Oral Rehabil. 2015;42:467–480.
   Google Scholar
• Abdulmajeed AA, Donovan TE, Cooper LF, et al. Fracture of layered zirconia restorations at 5 years: a dental laboratory survey. J Prosthet Dent. 2017;118:353–356.
   Google Scholar
• Zocca A, Colombo P, Gomes CM, et al. Additive manufacturing of ceramics: Issues, potentialities, and opportunities. J Am Ceram Soc. 2015;98:1983–2001.
   Google Scholar
• Zhao X, Evans JRG, Edirisinghe MJ, et al. Direct ink‐jet printing of vertical walls. J Am Ceramic Soc. 2002;85:2113–2115.
   Google Scholar
• Derby B. Additive manufacture of ceramics components by inkjet printing. Engineering 2015;1:113–123.
   Google Scholar
• Bourell DL, Marcus HL, Barlow JW, et al. Selective laser sintering of metals and ceramics. Int J Powder Metal. 1992;28:369–381.
   Google Scholar
• Gonzalez JA, Mireles J, Lin Y, et al. Characterization of ceramic components fabricated using binder jetting additive manufacturing technology. Ceramics Int. 2016;42:10559–10564.
   Google Scholar
• Díaz Lantada AD, Blas Romero A, Schwentenwein M, et al. Lithography-based ceramic manufacture (LCM) of auxetic structures: present capabilities and challenges. Smart Mater Struct. 2016;25:054015.
   Google Scholar
• Schwentenwein M, Homa J. Additive manufacturing of dense alumina ceramics. Int J Appl Ceram Technol. 2015;12:1–7.
   Google Scholar
• International Organization for Standardization. ISO 10477: 2004(E): dentistry – polymer-based crown and bridge materials. 2nd ed. Switzerland; 2004.
   Google Scholar
• Hjerppe J, Närhi TO, Vallittu PK, et al. Surface roughness and the flexural and bend strength of zirconia after different surface treatments. J Prosthet Dent. 2016;116:577–583.
   Google Scholar
• Kim M, Ahn J, Kim J, et al. Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency. J Adv Prosthodont. 2013;5:161–166.
   Google Scholar
• Stawarczyk B, Özcan M, Hallmann L, et al. The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio. Clin Oral Invest. 2013;17:269–274.
   Google Scholar
• Hjerppe J, Vallittu PK, Fröberg K, et al. Effect of sintering time on biaxial strength of zirconium dioxide. Dent Mater. 2009;25:166–171.
   Google Scholar
• Hallmann L, Mehl A, Ulmer P, et al. The influence of grain size on low‐temperature degradation of dental zirconia. J Biomed Mater Res. 2012;100B:447–456.
   Google Scholar
• Quinn GD. Fractography of ceramics and glasses. Gaithersburg, MD: National Institute of Standards and Technology; 2016. DOI: 10.6028/NIST.SP.960-16e2
   Google Scholar
• Scherrer SS, Lohbauer U, Della Bona A, et al. ADM guidance—ceramics: guidance to the use of fractography in failure analysis of brittle materials. Dent Mater. 2017;33:599–620.
   Google Scholar
• Johansson E, Lidström O, Johansson J, et al. Influence of resin composition on the defect formation in alumina manufactured by stereolithography. Materials. 2017;10:138.
   Google Scholar
• Pilichowski K, Njuguna J. Thermal degradation of polymeric materials. Shawbury (UK): Smithers Rapra Technlogy; 2005.
   Google Scholar
• Material Safety Data Sheet, LithaCon 3Y 610 purple. Lithoz GmbH; 2013.
   Google Scholar
• Griffith AA. The phenomena of rupture and flow in solids. Trans R Soc A. 1921;221:163–198.
   Google Scholar