Advanced search
Publication Cover
Biomaterial Investigations in Dentistry Volume 6, 2019 - Issue 1
Journal homepage
1,480
Views
7
CrossRef citations to date
0
Altmetric
Original Articles

The effects of artificial aging on high translucent zirconia

Wen KouDepartment of Odontology, Umeå University, Umeå, Sweden; Correspondence[email protected]
ORCID Iconhttp://orcid.org/0000-0003-0223-4161
ORCID Icon,
Klas GarbrielssonDepartment of Odontology, Umeå University, Umeå, Sweden; ORCID Iconhttp://orcid.org/0000-0002-2856-7645
ORCID Icon,
Adrian BorhaniDepartment of Odontology, Umeå University, Umeå, Sweden; ORCID Iconhttp://orcid.org/0000-0001-9260-6381
ORCID Icon,
Markus CarlborgDepartment of Applied Physics and Electronics, Umeå University, Umeå, SwedenORCID Iconhttp://orcid.org/0000-0003-1170-2203
ORCID Icon &
Margareta Molin ThorénDepartment of Odontology, Umeå University, Umeå, Sweden; ORCID Iconhttp://orcid.org/0000-0002-4915-6845
ORCID Icon
Pages 54-60 | Received 12 Sep 2019, Accepted 14 Oct 2019, Published online: 07 Nov 2019

References

  • Kwon SJ, Lawson NC, McLaren EE, et al. Comparison of the mechanical properties of translucent zirconia and lithium disilicate. J Prosthet Dent. 2018;120(1):132–137.
  • Zhang Y, Lawn BR. Novel zirconia materials in dentistry. J Dent Res. 2018;97(2):140–147.
  • Lughi V, Sergo V. Low temperature degradation -aging- of zirconia: a critical review of the relevant aspects in dentistry. Dent Mater. 2010;26(8):807–820.
  • Deville S, Chevalier J, Gremillard L. Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia. Biomaterials. 2006;27(10):2186–2192.
  • Deville S, Gremillard L, Chevalier J, et al. A critical comparison of methods for the determination of the aging sensitivity in biomedical grade yttria-stabilized zirconia. J Biomed Mater Res. 2005;72(2):239–245.
  • Inokoshi M, Zhang F, De Munck J, et al. Influence of sintering conditions on low-temperature degradation of dental zirconia. Dent Mater. 2014;30(6):669–678.
  • Marinis A, Aquilino SA, Lund PS, et al. Fracture toughness of yttria-stabilized zirconia sintered in conventional and microwave ovens. J Prosthet Dent. 2013;109(3):165–171.
  • International Organization for Standardization. Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP). SS-EN ISO 13356. 2015.
  • International Organization for Standardization. Dentistry – Ceramic materials. ISO 6872. 2015.
  • André M, Kou W, Sjögren G, et al. Effects of pretreatments and hydrothermal aging on biaxial flexural strength of lithium di-silicate and Mg-PSZ ceramics. J Dent. 2016;55:25–32.
  • Flury S, Peutzfeldt A, Lussi A. Influence of surface roughness on mechanical properties of two computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials. Oper Dent. 2012;37(6):617–624.
  • Walczak K, Meißner H, Range U, et al. Translucency of zirconia ceramics before and after artificial aging. J Prosthodont. 2018;28(1):e319–e324.
  • Zhang Y. Making yttria-stabilized tetragonal zirconia translucent. Dent Mater. 2014;30(10):1195–1203.
  • Nassary Zadeh P, Lümkemann N, Sener B, et al. Flexural strength, fracture toughness, and translucency of cubic/tetragonal zirconia materials. J Prosthet Dent. 2018;120(6):948–954.
  • Stawarczyk B, Özcan M, Hallmann L, et al. The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio. Clin Oral Invest. 2013;17(1):269–274.
  • Igawa N, Ishii Y. Crystal Structure of Metastable Tetragonal Zirconia up to 1473 K. J Am Ceram Soc. 2001;84(5):1169–1171.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.