References
- Tian T, Tsoi JKH, Matinlinna JP, et al. Aspects of bonding between resin luting cements and glass ceramic materials. Dent Mater. 2014;30(7):E147–E162.
- Guarda GB, Correr AB, Goncalves LS, et al. Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic. Oper Dent. 2013;38(2):208–217.
- Hitz T, Stawarczyk B, Fischer J, et al. Are self-adhesive resin cements a valid alternative to conventional resin cements? A laboratory study of the long-term bond strength. Dent Mater. 2012;28(11):1183–1190.
- Aguiar TR, André CB, Correr-Sobrinho L, et al. Effect of storage times and mechanical load cycling on dentin bond strength of conventional and self-adhesive resin luting cements. J Prosthet Dent. 2014;111(5):404–410.
- Kalavacharla VK, Lawson NC, Ramp LC, et al. Influence of etching protocol and silane treatment with a universal adhesive on lithium disilicate bond strength. Oper Dent. 2015;40(4):372–378.
- Sundfeld Neto D, Naves LZ, Costa AR, et al. The effect of hydrofluoric acid concentration on the bond strength and morphology of the surface and interface of glass ceramics to a resin cement. Oper Dent. 2015;40(5):470–479.
- Pisani-Proenca J, Erhardt MCG, Valandro LF, et al. Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic. J Prosthet Dent. 2006;96(6):412–417.
- Sundfeld D, Correr-Sobrinho L, Pini NIP, et al. Heat treatment-improved bond strength of resin cement to lithium disilicate dental glass-ceramic. Ceram Int. 2016;42(8):10071–10078.
- Duzyol M, Sagsoz O, Polat Sagsoz N, et al. The effect of surface treatments on the bond strength between CAD/CAM blocks and composite resin. J Prosthodont. 2016;25(6):466–471.
- Filho AM, Vieira LC, Araújo E, et al. Effect of different ceramic surface treatments on resin microtensile bond strength. J Prosthodont. 2004;13(1):28–35.
- Manso AP, Silva NR, Bonfante EA, Pegoraro TA, et al. Cements and Adhesives for all-ceramic restorations. Dent Clin North Am. 2011;55(2):311–332.
- Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: a review of the current literature. J Prosthet Dent. 1998;80(3):280–301.
- Spinell T, Schedle A, Watts DC. Polymerization shrinkage kinetics of dimethacrylate resin-cements. Dent Mater. 2009;25(8):1058–1066.
- De Jager N, Pallav P, Feilzer AJ. Finite element analysis model to simulate the behavior of luting cements during setting. Dent Mater. 2005;21(11):1025–1032.
- Bacchi A, Pfeifer CS. Rheological and mechanical properties and interfacial stress development of composite cements modified with thio-urethane oligomers. Dent Mater. 2016;32(8):978–986.
- Kermanshahi S, Santerre JP, Cvitkovitch DG, et al. Biodegradation of resin-dentin interfaces bacterial microleakage. J Dent Res. 2010;89(9):996–1001.
- Bacchi A, Dobson A, Ferracane JL, et al. Thio-urethanes improve properties of dual-cured composite cements. J Dent Res. 2014;93(12):1320–1325.
- Bacchi A, Consani RL, Martim GC, et al. Thio-urethane oligomers improve the properties of light-cured resin cements. Dent Mater. 2015;31(5):565–574.
- Hoyle CE, Lee TY, Roper TJ. Thiol–Enes: chemistry of the past with promise for the future. Polym Sci, Part A: Polym Chem. 2004;42(21):5301–5338.
- Lu H, Carioscia JA, Stansbury JW, Bowman CN, et al. Investigations of step-growth thiol-ene polymerizations for novel dental restoratives. Dent Mater. 2005;21(12):1129–1136.
- Senyurt AF, Hoyle CE, Wei H, et al. Thermal and mechanical properties of cross-linked photopolymers based on multifunctional thiol-urethane ene monomers. Macromolecules. 2007;40(9):3174–3182.
- Li Q, Zhou H, Wicks DA, et al. Thiourethane-based thiol-ene high Tg networks: preparation, thermal, mechanical, and physical properties. J Polym Sci A Polym Chem. 2007;45(22):5103–5111.
- Berchtold KA, Lovestead TM, Bowman CN. Coupling chain length dependent and reaction diffusion controlled termination in the free radical polymerization of multivinyl (meth) acrylates. Macromolecules. 2002;35(21):7968–7975.
- Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 1999;27(2):89–99.
- Yang R, Arola D, Han Z, et al. A comparison of the fracture resistance of three machinable ceramics after thermal and mechanical cycling. J Prosthet Dent. 2014;112(4):878–885.
- Vasqueza VZC, Ozcan M, Kimpara ET. Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading. Dent Mater. 2009;25:221–231.
- Smyd ES. The role of torque, torsion and bending in prosthodontics failures. J Prosth Dent. 1961;11(1):95–111.
- Wiskott HW, Nicholls JI, Belser UC. Stress cycling: basic principles and prosthodontic implications. Int J Prosthod. 1995;8:105–116.
- Henriques B, Goncalves S, Soares D, et al. Shear bond strength comparison between conventional porcelain fused to metal and new functionally graded dental restorations after thermal-mechanical cycling. J Mech Behav Biomed Mater. 2012;13:194–205.
- Fischer J, Zbaren C, Stawarczyk B, et al. The effect of thermal cycling on metal-ceramic bond strength. J Dent. 2009;37(7):549–553.
- Borges GA, Caldas D, Taskonak B, et al. Fracture loads of all-ceramic crowns under wet and dry cycling conditions. J Prosthodont. 2009;18(8):649–655.
- Silverstein R, Webster F, Kiemle D. Spectrometric identification of organic compounds. 7 ed. New York (NY): Wiley Interscience; 2005. p. 154.
- Bacchi A, Spazzin AO, de Oliveira GR, et al. Resin cements formulated with thio-urethanes can strengthen porcelain and increase bond strength to ceramics. J Dent. 2018;73:50–56.
- Hidaka O, Iwasaki M, Saito M, et al. Influence of clenching intensity on bite force balance, occlusal contact area, and average bite pressure. J Dent Res. 1999;78(7):1336–1344.
- Shimada A, Yamabe Y, Torisu T, et al. Measurement of dynamic bite force during mastigation. J Oral Rehabil. 2012;39(5):349–356.
- Della Bona A, Shen CY, Anusavice KJ. Work of adhesion of resin on treated lithia disilicate-based ceramic. Dent Mater. 2004;20(4):338–344.
- Salvio LA, Correr-Sobrinho L, Consani S, et al. Effect of water storage and surface treatments on the tensile bond strength of IPS Empress 2 ceramic. J Prosthodontics. 2007;16(3):192–199.
- Ayad MF, Fahmy NZ, Rosenstiel SF. Effect of surface treatment on roughness and bond strength of a heat-pressed ceramic. J Prosthet Dent. 2008;99(2):123–130.
- Zang Y, Zhan F, Shi W. Photopolymerization behavior and properties of highly branched poly(thioether-urethane) acrylates used for UV-curing coatings. Prog Org Coat. 2011;71:399–405.
- Bacchi A, Nelson M, Pfeifer CS. Characterization of methacrylate-based composites containing thio-urethane oligomers. Dent Mater. 2016;32(2):233–239.
- Oyafuso DK, Ozcan M, Bottino MA, et al. Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks. Dent Mater. 2008;24(3):351–356.
- Myers ML, Ergle JW, Fairhurst CW, et al. Fatigue characteristics of a high strength porcelain. Int J Prosthodont. 1994;7(3):253–257.
- White SN, Zhao XY, Zhaokun Y, et al. Cyclic mechanical cycling of a feldspathic dental porcelain. Int J Prosthodont. 1995;8:413–420.
- Vasquez V, Ozcan M, Nishioka R, et al. Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium. Dent Mater J. 2008;27:7–15.
- Soles CL, Yee AF. A discussion of the molecular mechanisms of moisture transport in epoxy resins. J Polym Sci B Polym Phys. 2000;38(5):792–802.
- Ferracane JL. Elution of leachable components from composites. J Oral Rehabil. 1994;21(4):441–452.
- Beatty MW, Swartz ML, Moore BK, et al. Effect of cross-linking agent content, monomer functionality, and repeat unit chemistry on properties of unfilled resins. J Biomed Mater Res. 1993;27(3):403–413.
- Venz S, Dickens B. NIR-spectroscopic investigation of water sorption characteristics of dental resins and composites. J Biomed Mater Res. 1991;25(10):1231–1248.