Bond strength of zirconia- or polymer-based copings cemented on implant-supported titanium bases – an in vitro study

References

• Chrcanovic BR, Kisch J, Larsson C. Retrospective clinical evaluation of 2- to 6-unit implant-supported fixed partial dentures: mean follow-up of 9 years. Clin Implant Dent Relat Res. 2020;22(2):201–212.
   Web of Science ®Google Scholar
• Chee W, Jivraj S. Screw versus cemented implant supported restorations. Br Dent J. 2006;201(8):501–507.
   Google Scholar
• Cavalcanti AN, Foxton RM, Watson TF, et al. Bond strength of resin cements to a zirconia ceramic with different surface treatments. Oper Dent. 2009; 34(3):280–287.
   PubMed Web of Science ®Google Scholar
• Razak AA, Abu-Hassan MI, Al-Makramani BM, et al. Effect of surface treatments on the bond strength to Turkom-Cera all-ceramic material. J Contemp Dent Pract. 2016;17(11):920–925.
   Google Scholar
• Carter GM, Hunter KM, Herbison P. Factors influencing the retention of cemented implant-supported crowns. N Z Dent J. 1997;93(412):36–38.
   Google Scholar
• Covey DA, Kent DK, St Germain HA, Jr, et al. Effects of abutment size and luting cement type on the uniaxial retention force of implant-supported crowns. J Prosthet Dent. 2000;83(3):344–348.
   Web of Science ®Google Scholar
• Linkevicius T, Caplikas A, Dumbryte I, et al. Retention of zirconia copings over smooth and airborne-particle-abraded titanium bases with different resin cements. J Prosthet Dent. 2019;121(6):949–954.
   PubMed Web of Science ®Google Scholar
• Rokaya D, Srimaneepong V, Sapkota J, et al. Polymeric materials and films in dentistry: an overview. J Adv Res. 2018;14:25–34.
   Web of Science ®Google Scholar
• Rosentritt M, Raab P, Hahnel S, et al. In-vitro performance of CAD/CAM- fabricated implant-supported temporary crowns. Clin Oral Invest. 2017;21(8):2581–2587.
   Web of Science ®Google Scholar
• Patzelt SBM, Spies BC, Kohal RJ. CAD/CAM-fabricated implant-supported restorations: a systematic review. Clin Oral Implants Res. 2015;26 Suppl 11:77–85.
   Web of Science ®Google Scholar
• Sellers K, Powers JM, Kiat-Amnuay S. Retentive strength of implant-supported CAD-CAM lithium disilicate crowns on zirconia custom abutments using 6 different cements. J Prosthet Dent. 2017;117(2):247–252.
   Web of Science ®Google Scholar
• Abad-Coronel C, Naranjo B, Valdiviezo P. Adhesive systems used in indirect restorations cementation: Review of the literature. Dentistry Journal. 2019;7(3):71.
   Google Scholar
• Tanış MÇ, Akay C, Karakış D. Resin cementation of zirconia ceramics with different bonding agents. Biotechnol Biotechnol Equip. 2015;29(2):363–367.
   PubMed Web of Science ®Google Scholar
• Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater. 1998;14(1):64–71.
   PubMed Web of Science ®Google Scholar
• Chen C, Kleverlaan CJ, Feilzer AJ. Effect of an experimental zirconia-silica coating technique on micro tensile bond strength of zirconia in different priming conditions. Dent Mater. 2012;28(8):e127–e134.
   Web of Science ®Google Scholar
• Zahoui A, Bergamo ETp, Marun MM, et al. Cementation protocol for bonding zirconia crowns to titanium base CAD/CAM abutmanets. Int J Prosthodont. 2020;33(5):527–535.
   Web of Science ®Google Scholar
• Pilo R, Kaitsas V, Zinelis S, et al. Interaction of zirconia primers with yttria-stabilized zirconia surfaces. Dent Mater. 2016;32(3):353–362.
   Web of Science ®Google Scholar
• Chen Y, Lu Z, Qian M, et al. Effect of 10-methacryloxydecyl dihydrogen phosphate concentration on chemical coupling of methacrylate resin to yttria-stabilized zirconia. J Adhes Dent. 2017;19(4):349–355.
   PubMed Web of Science ®Google Scholar
• Papia E, Larsson C, Du Toit M, et al. Bonding between oxide ceramics and adhesive cement systems: a systematic review. J Biomed Mater Res B Appl Biomater. 2014;102(2):395–413.
   PubMed Web of Science ®Google Scholar
• Pitta J, Burkhardt F, Mekki M, et al. Effect of airborne-particle abrasion of a titanium base abutment on the stability of the bonded interface and retention forces of crowns after artificial aging. J Prosthet Dent. 2020;S0022-3913(20):30420–30420.
   Google Scholar
• Pitta J, Bijelic-Donova J, Burkhardt F, et al. Pitta temporary Implant-Supported single crowns using titanium base abutments: an in vitro study on bonding stability and pull-out forces. Int J Prosthodont. 2020;33(5):546–552.
   Web of Science ®Google Scholar
• Sciasci P, Abi-Rached FO, Adabo GL, et al. Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic. J Prosthet Dent. 2015;113(3):212–219.
   Web of Science ®Google Scholar
• GüNgör M, Nemli S. The effect of resin cement type and thermomechanical aging on the retentive strength of custom zirconia abutments bonded to titanium inserts. Int J Oral Maxillofac Implants. 2018;33(3):523–529.
   Web of Science ®Google Scholar
• Gumus H, Kurtulus I, Kuru E. Evaluation and comparison of the film thicknesses of six temporary cements before and after thermal cycling. Niger J Clin Pract. 2018;12(21):1656–1661.
   Google Scholar
• Berli C, Thieringer FM, Sharma N, et al. Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices. J Prosth Dent. 2020;S0022-3913(19):30704–30708.
   Google Scholar
• Chaves LVF, de Medeiros TA, Borges BCD, et al. Influence of aging methods on push-out bond strength of adhesive systems to dentin cavities. Appl Adhes Sci. 2017;5(1):26.
   Google Scholar