Influence of the preparation processes on the residual stresses in PCD and PcBN tools

References

• Behrens, L. (2016). Schleifen von PCBN. (Doctoral dissertation) Gottfried Wilhelm Leibniz Universität, Hannover. https://doi.org/10.15488/8638
   Google Scholar
• Boppart, H., Silvera, I. F. & van Straaten J. (1985). Raman spectra of diamond at high pressures. Physical Review. B, Condensed Matter, 32(2), 1423–1425. https://doi.org/10.1103/PhysRevB.32.1423
   PubMed Web of Science ®Google Scholar
• Breidenstein, B., & Vogel, N. (2024). Locally resolved stress measurement in the ultra-hard composites polycrystalline diamond and polycrystalline cubic boron nitride. Forschung im Ingenieurwesen, 88(1), 5. https://doi.org/10.1007/s10010-024-00726-6
   Web of Science ®Google Scholar
• Breidenstein, B., Vogel, N., Behrens, H., Dietrich, M., & Andersson, J. M. (2022). Determination of local residual stress on post-treated TiAlN-coated tungsten carbide tools. Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 16(4), 663–671. https://doi.org/10.1134/S1027451022040231
   Google Scholar
• Brinksmeier, E., Fangmann, S., & Rentsch, R. (2011). Drilling of composites and resulting surface integrity. CIRP Annals Manufacturing Annals, 60(1), 57–60. https://doi.org/10.1016/j.cirp.2011.03.077
   Web of Science ®Google Scholar
• Catledge, S. A., Yogesh, K. V., Ladi, R., & Rai, G. (1996). Micro-Raman stress investigations and X-ray diffraction analysis of polycrystalline diamond (PCD) tools. Diamond and Related Materials, 5(10), 1159–1165. https://doi.org/10.1016/0925-9635(96)00534-1
   Web of Science ®Google Scholar
• Fang, N., & Wu, Q. (2005). The effects of chamfered and honed tool edge geometry in machining of three aluminum alloys. International Journal of Machine Tools and Manufacture, 45(10), 1178–1187. https://doi.org/10.1016/j.ijmachtools.2004.12.003
   Web of Science ®Google Scholar
• Friemuth, T. (2002). Herstellung spanender Werkzeuge. (Postdoctoral dissertation) Gottfried Wilhelm Leibniz Universität, Hannover.
   Google Scholar
• Klocke, F., Brinksmeier, E., & Weinert, K. (2005). Capability profile of hard cutting and grinding processes. Cirp Annals, 54(2), 22–45. https://doi.org/10.1016/S0007-8506(07)60018-3
   Web of Science ®Google Scholar
• Kress, J. (2007). Auswahl und Einsatz von polykristallinem kubischem Bornitrid beim Drehen, Fräsen und Reiben. (Doctoral dissertation) Universitat Dortmund.
   Google Scholar
• Leahy, W. (2013). CBN-Werkstoff mit formkontrolliertem Bruchverhalten. Ein neues Haus fuer Innovationen. Werkstatt und Betrieb, 3, 70–72.
   Google Scholar
• Li, G., Rahim, M. Z., Ding, S., & Sun, S. (2016). Performance and wear analysis of polycrystalline diamond (PCD) tools manufactured with different methods in turning titanium alloy Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 85(1-4), 825–841. https://doi.org/10.1007/s00170-015-7949-6
   Web of Science ®Google Scholar
• Mamalis, A. G., Horvath, M., & Grabchenko, A. I. (2000). Diamond grinding of super-hard materials. Journal of Materials Processing Technology, 97(1-3), 120–125. https://doi.org/10.1016/S0924-0136(99)00358-1
   Web of Science ®Google Scholar
• Mitra, S. S., Brafman, O., Daniels, W. B., & Crawford, R. K. (1969). Pressure-induced phonon frequency shifts measured by Raman scattering. Physical Review, 186(3), 942–944. https://doi.org/10.1103/PhysRev.186.942
   Google Scholar
• Ono, S., Mibe, K., Hirao, N., & Ohishi, Y. (2015). In situ Raman spectroscopy of cubic boron nitride to 90 GPa and 800 K. Journal of Physics and Chemistry of Solids, 76, 120–124. https://doi.org/10.1016/j.jpcs.2014.09.001
   Web of Science ®Google Scholar
• Özel, T., Karpat, Y., & Srivastava, A. (2008). Srivastava: Hard turning with variable micro-geometry PcBN tools. CIRP Annals, 57(1), 73–76. https://doi.org/10.1016/j.cirp.2008.03.063
   Web of Science ®Google Scholar
• Rahim, M. Z., Pourmoslemi, A., Ding, S. L., & Mo, J. (2013). Residual stress analysis of polycrystalline diamond after electrical discharge machining. Advanced Materials Research, 820, 106–109. https://doi.org/10.4028/www.scientific.net/AMR.820.106
   Google Scholar
• Rehe, M. (2015). Herleitung prozessbezogener Kenngrößen der Schneidkantenverrundung im Fräsprozess (Doctoral dissertation) Gottfried Wilhelm Leibniz Universität, Hannover.
   Google Scholar
• Sanjurjo, J. A., López-Cruz, E., Vogl, P., & Cardona, M. (1983). Dependence on volume of the phonon frequencies and the ir effective charges of several III-V semiconductors. Physical Review B, 28(8), 4579–4584. https://doi.org/10.1103/PhysRevB.28.4579
   Web of Science ®Google Scholar
• Schindler, F. (2015). Zerspanungsmechanismen beim Schleifen von polykristallinem Diamant (Doctoral dissertation) Rheinisch-Westfälische Technische Hochschule, Aachen.
   Google Scholar
• Schindler, F., Brocker, R., Klocke, F., & Mattfeld, P. (2016). A discussion on removal mechanisms in grinding polycrystalline diamond. Journal of Manufacturing Science and Engineering, 138(1), 5. https://doi.org/10.1115/1.4029804
   Web of Science ®Google Scholar
• Sotillo, B., Bharadwaj, V., Hadden, J. P., Rampini, S., Chiappini, A., Fernandez, T. T., … Eaton, S. M. (2017). Visible to infrared diamond photonics enabled by focused femtosecond laser pulses. Micromachines, 8(2), 60. https://doi.org/10.3390/mi8020060
   Web of Science ®Google Scholar
• Tsao, C. C., & Hocheng, H. (2007). Effect of tool wear on delamination in drilling composite materials. International Journal of Mechanical Sciences, 49(8), 983–988. https://doi.org/10.1016/j.ijmecsci.2007.01.001
   Web of Science ®Google Scholar
• Tso, P.-L., & Liu, Y.-G. (2002). Study on PCD machining. International Journal of Machine Tools and Manufacture , 42(3), 331–334. https://doi.org/10.1016/S0890-6955(01)00131-6
   Web of Science ®Google Scholar
• Wojdyr, M. (2010). Fityk: a general-purpose peak fitting program. Journal of Applied Crystallography, 43(5), 1126–1128. https://doi.org/10.1107/S0021889810030499
   Google Scholar
• Xikun, L., Jing, L., Like, Q., Tong, C., Guanming, Q., & Yanbin, S. (2007). Composition, characteristics and development of advanced ceramic cutting tools. Journal of Rare Earths, 25, 287–294. https://doi.org/10.1016/S1002-0721(07)60490-6
   Web of Science ®Google Scholar