The polishing methods for large area CVD diamond wafer

Reference

• Chae K-W, Baik Y-J, Park J-K, et al. The 8-inch free-standing CVD diamond wafer fabricated by DC-PACVD. Diamond Relat Mater. 2010;19(10):1–15.
   Web of Science ®Google Scholar
• Schreck M, Gsell S, Brescia R, et al. Ion bombardment induced buried lateral growth: the key mechanism for the synthesis of single crystal diamond wafers. Sci Rep. 2017;7(1):44462.
   PubMed Web of Science ®Google Scholar
• Zhu X, Shao S, Chan S, et al. High performance of normally‐on and normally‐off devices with highly boron‐doped source and drain on H‐terminated polycrystalline diamond. Adv Elect Materials. 2023;9(3):2201122.
   Web of Science ®Google Scholar
• Chernykh MY, Andreev AA, Ezubchenko IS, et al. GaN-based heterostructures with CVD diamond heat sinks: a new fabrication approach towards efficient electronic devices. Appl Mater Today. 2022;26:101338.
   Web of Science ®Google Scholar
• Buijnsters JG, Tsigkourakos M, Hantschel T, et al. Effect of boron doping on the wear behavior of the growth and nucleation surfaces of micro- and nanocrystalline diamond films. ACS Appl Mater Interfaces. 2016;8(39):26381–26391.
   PubMed Web of Science ®Google Scholar
• Alcantar-Pena JJ, de Obaldia E, Tirado P, et al. Polycrystalline diamond films with tailored micro/nanostructure/doping for new large area film-based diamond electronics. Diamond Relat Mater. 2019;91:261–271.
   Web of Science ®Google Scholar
• Francis D, Kuball M. 14 - GaN-on-diamond materials and device technology: a review. In: Tadjer MJ, Anderson TJ, editors. Thermal management of gallium nitride electronics. Cambridge, England: Woodhead Publishing; 2022. p. 295–331.
   Google Scholar
• Imanishi S, Horikawa K, Oi N, et al. 3.8W/mm RF power density for ALD Al2O3-based two-dimensional hole gas diamond MOSFET operating at saturation velocity. IEEE Electron Device Lett. 2019;40(2):279–282.
   Web of Science ®Google Scholar
• Yunata EE, Aizawa T, Tamaoki K, et al. Plasma polishing and finishing of CVD-diamond coated WC (Co) dies for dry stamping. International Conference on the Technology of Plasticity (ICTP), Cambridge, England, 2017, pp. 2197–2202.
   Google Scholar
• Hicks ML, Pakpour-Tabrizi AC, Jackman RB. Polishing, preparation and patterning of diamond for device applications. Diamond Relat Mater. 2019;97:107424.
   Web of Science ®Google Scholar
• Wang HC, Jin ZJ, Li XH, et al. Insight into the graphitization mechanism of the interface between iron and diamond: a DFT study. Diamond Relat Mater. 2022;127:109213.
   Web of Science ®Google Scholar
• Shubin WB, Yujing SJ, Shi T. Surface graphitization analysis of cerium-polished HFCVD diamond films with micro-raman spectra. J Rare Earths. 2008;26(3):362–366.
   Web of Science ®Google Scholar
• Yan XB, Wei JJ, An K, et al. High temperature surface graphitization of CVD diamond films and analysis of the kinetics mechanism. Diamond Relat Mater. 2021;120:108647.
   Web of Science ®Google Scholar
• Lee CK. Effects of hydrogen and oxygen on the electrochemical corrosion and wear-corrosion behavior of diamond films deposited by hot filament chemical vapor deposition. Appl Surf Sci. 2008;254(13):4111–4117.
   Web of Science ®Google Scholar
• Shi Z, Jin Z, Guo X, et al. Insights into the atomistic behavior in diamond chemical mechanical polishing with OH environment using ReaxFF molecular dynamics simulation. Comput Mater Sci. 2019;166:136–142.
   Web of Science ®Google Scholar
• Kubota A, Nagae S, Touge M. Improvement of material removal rate of single-crystal diamond by polishing using H2O2 solution. Diamond Relat Mater. 2016;70:39–45.
   Web of Science ®Google Scholar
• Chen Y, Nguyen T, Zhang LC. Polishing of polycrystalline diamond by the technique of dynamic friction-Part 5: quantitative analysis of material removal. Int J Machine Tools & Manufacture. 2009;49(6):515–520.
   Web of Science ®Google Scholar
• Le X, Peterson ML. Material removal rate in flat lapping. J Manuf Syst. 1999;18(2):71–78.
   Google Scholar
• Zhou L, Huang ST, Xu LF. An efficient super-high speed polishing method for CVD diamond films. Int J Re­fractory Metals & Hard Mater. 2011;29(6):698–704.
   Web of Science ®Google Scholar
• Ralchenko VG, Ashkinazi EE, Zavedeev EV, et al. High-rate ultrasonic polishing of polycrystalline diamond films. Diamond Relat Mater. 2016;66:171–176.
   Web of Science ®Google Scholar
• Kubota A, Nagae S, Motoyama S. High-precision mechanical polishing method for diamond substrate using micron-sized diamond abrasive grains. Diamond Relat Mater. 2020;101:107644.
   Web of Science ®Google Scholar
• Yang H, Jin Z, Niu H, et al. A novel visible-light catalyzed assisted single crystal diamond chemical mechanical polishing slurry and polishing mechanism. Mater Today Commun. 2022;33:104249.
   Web of Science ®Google Scholar
• Sun Y, Wang S, Tian S, et al. Polishing of diamond thick films by Ce at lower temperatures. Diamond Relat Mater. 2006;15(9):1412–1417.
   Web of Science ®Google Scholar
• Johnson CE. Chemical polishing of diamond. Surf Coat Technol. 1994;68-69/(69):374–377.
   Google Scholar
• Liu N, Sugawara K, Yoshitaka N, et al. Damage-free highly efficient plasma-assisted polishing of a 20-mm square large mosaic single crystal diamond substrate. Sci Rep. 2020;10(1):19432.
   PubMed Web of Science ®Google Scholar
• Yamamura K, Emori K, Sun R, et al. Damage-free highly efficient polishing of single-crystal diamond wafer by plasma-assisted polishing. CIRP Ann. 2018;67(1):353–356.
   Web of Science ®Google Scholar
• Yang HP, Jin ZJ, Niu L, et al. Visible-light catalyzed assisted chemical mechanical polishing of single crystal diamond. Diamond Relat Mater. 2022;125:108982.
   Web of Science ®Google Scholar
• Xiao C, Hsia F-C, Sutton-Cook A, et al. Polishing of polycrystalline diamond using synergies between chemical and mechanical inputs: a review of mechanisms and processes. Carbon. 2022;196:29–48.
   Web of Science ®Google Scholar
• Schuelke T, Grotjohn TA. Diamond polishing. Diamond Relat Mater. 2013;32:17–26.
   Web of Science ®Google Scholar
• Xu H, Zang J, Tian P, et al. Surface conversion reaction and high efficient grinding of CVD diamond films by chemically mechanical polishing. Ceram Int. 2018;44(17):21641–21647.
   Web of Science ®Google Scholar
• Thomas ELH, Nelson GW, Mandal S, et al. Chemical mechanical polishing of thin film diamond. Carbon. 2014;68:473–479.
   Web of Science ®Google Scholar
• Li J, Wang S, Sun Y, et al. Diamond films by CVD and high rate polishing at low temperature with partially molten Ce-Fe alloy. Rare Metal Mater Engin. 2007;36(5):933–936.
   Web of Science ®Google Scholar
• Zaitsev AM, Kosaca G, Richarz B, et al. Thermochemical polishing of CVD diamond films. Diamond Relat Mater. 1998;7(8):1108–1117.
   Web of Science ®Google Scholar
• Nguyen VT, Fang TH. Phase transformation and subsurface damage formation in the ultrafine machining process of a diamond substrate through atomistic simulation. Sci Rep. 2021;11(1):17795.
   PubMed Web of Science ®Google Scholar
• Zhang M, Xu H. Controllability and mechanism investigation on the subsurface damage of CVD diamond film by Fe-containing vitrified bond wheel. Tribol Int. 2021;155:106774.
   Web of Science ®Google Scholar
• Zheng YT, Ye HT, Thornton R, et al. Subsurface cleavage of diamond after high-speed three-dimensional dynamic friction polishing. Diamond Relat Mater. 2020;101:107600.
   Web of Science ®Google Scholar
• Kononenko TV, Pivovarov PA, Khomich AA, et al. Processing of polycrystalline diamond surface by IR laser pulses without interior damage. Optics and Laser Technol. 2019;117:87–93.
   Web of Science ®Google Scholar
• Chen Y, Zhang LC. Polishing of polycrystalline diamond by the technique of dynamic friction, part 4: establishing the polishing map. Int J Machine Tools & Manufacture. 2009;49(3–4):309–314.
   Web of Science ®Google Scholar
• Xu HQ, Zang JB, Yang GP, et al. High-efficiency grinding CVD diamond films by Fe-Ce containing corundum grinding wheels. Diamond Relat Mater. 2017;80:5–13.
   Web of Science ®Google Scholar
• Hocheng H, Chen CC. Chemical-assisted mechanical polishing of diamond film on wafer. In: Jywe W, Chen CL, Fan KC, et al., editors. Progress on advanced manufacture for micro/nano technology 2005, Pt 1 and 2. Stafa, Switzerland: Trans Tech Publications Ltd, 2006. pp. 1225–1230.
   Google Scholar
• Yuan Z, Jin Z, Zhang Y, et al. Chemical mechanical polishing slurries for chemically vapor-deposited diamond films. J Manuf Sci Eng. 2013;135(4):041006.
   Web of Science ®Google Scholar
• Feng HB, Chen YQ, Zhang LC. Polishing of CVD diamond wafers and films. International Conference on Materials Science and Nanotechnology (ICMSN 2012), Guangzhou, PEOPLES R CHINA, 2012, pp. 373–376.
   Google Scholar
• Wang CY, Zhang FL, Kuang TC, et al. Chemical/mechanical polishing of diamond films assisted by molten mixture of LiNO3 and KNO3. Thin Solid Films. 2006;496(2):698–702.
   Web of Science ®Google Scholar
• Sharonov GV, Petrov SA. Superfinishing polish of diamond substrates for epitaxial technology. J Eng Phys Thermophy. 2011;84(5):1188–1191.
   Google Scholar
• Xiu LF, Chengming L. Thirty years of chemical vapor deposition (CVD) diamond films research in China. J Synthetic Crystals. 2022;51(5):753–758.
   Google Scholar
• Li B, Han B, Lu XY, et al. IR transmittance of large-sized free-standing transparent diamond films prepared by MWPCVD. New Carbon Mater. 2008;23(3):245–249.
   Web of Science ®Google Scholar
• Mao YM, Gao J, Zheng K, et al. Optimization for solderability of large-size single-crystal diamond with heterogeneity alloys by tantalum coating. Surface & Coatings Technol. 2022;437:128382.
   Web of Science ®Google Scholar
• Chen G, Liu H, Li J, et al. Preparation method of CVD diamond and novel ideas for increasing growth rate. JES. 2017;09(06):538–546.
   Google Scholar
• Huang XR, Zhou CJ, Wu B, et al. Wafer-scale polishing of polycrystalline MPACVD-diamond. Surfaces. 2022;5(1):155–164.
   Google Scholar
• Liu N, Sugimoto K, Yoshitaka N, et al. Highly efficient finishing of large-sized single crystal diamond substrates by combining nanosecond pulsed laser trimming and plasma-assisted polishing. Ceram Int. 2023;49(11):19109–19123.
   Web of Science ®Google Scholar
• Kubota A, Nagae S, Motoyama S, et al. Two-step polishing technique for single crystal diamond (100) substrate utilizing a chemical reaction with iron plate. Diamond Relat Mater. 2015;60:75–80.
   Web of Science ®Google Scholar
• Wen H, Lu J, Li C, et al. Research on integrated processing of grinding and polishing for large-size single crystal diamond. J Synthetic Crystals. 2022;51(05):941–947.
   Google Scholar
• Liao MY, Shen B, Wang ZG. Ultra-wide bandgap semiconductor materials. Amsterdam, Netherlands: Elsevier; 2019.
   Google Scholar
• Zong WJ, Li D, Cheng K, et al. The material removal mechanism in mechanical lapping of diamond cutting tools. Int J Machine Tools & Manufacture. 2005;45(7-8):783–788.
   Web of Science ®Google Scholar
• Ollison CD, Brown WD, Malshe AP, et al. A comparison of mechanical lapping versus chemical-assisted mechanical polishing and planarization of chemical vapor deposited (CVD) diamond. Diamond Relat Mater. 1999;8(6):1083–1090.
   Web of Science ®Google Scholar
• Tang CJ, Neves AJ, Fernandes AJS, et al. A new elegant technique for polishing CVD diamond films. Diamond Relat Mater. 2003;12(8):1411–1416.
   Web of Science ®Google Scholar
• Xu HQ, Zang JB, Tian PF, et al. Rapid grinding CVD diamond films using corundum grinding wheels containing iron. Int J Refractory Metals & Hard Materials. 2018;71:147–152.
   Web of Science ®Google Scholar
• Tsai HY, Ting CJ, Chou CP. Evaluation research of polishing methods for large area diamond films produced by chemical vapor deposition. Diamond Relat Mater. 2007;16(2):253–261.
   Web of Science ®Google Scholar
• Izak T, Kromka A, Babchenko O, et al. Comparative study on dry etching of polycrystalline diamond thin films. Vacuum. 2012;86(6):799–802.
   Web of Science ®Google Scholar
• Zheng YT, Ye HT, Liu JL, et al. Surface morphology evolution of a polycrystalline diamond by inductively coupled plasma reactive ion etching (ICP-RIE). Mater Lett. 2019;253:276–280.
   Web of Science ®Google Scholar
• Fu Y, Lu F, Wang J, et al. Polishing of thick free standing films by rare earth metals. Chinese High Technology Letters. 1996;(1):1–5.
   Google Scholar
• Tang FZ, Chen YQ, Zhang LC. Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy. Philos Mag. 2012;92(13):1680–1690.
   Web of Science ®Google Scholar
• Ozkan AM, Malshe AP, Brown WD. Sequential multiple-laser-assisted polishing of free-standing CVD diamond substrates. Diamond Relat Mater. 1997;6(12):1789–1798.
   Web of Science ®Google Scholar
• Leech PW, Reeves GK, Holland AS, et al. Ion beam etching of CVD diamond film in Ar, Ar/O-2 and Ar/CF4 gas mixtures. Diamond Relat Mater. 2002;11(3-6):833–836.
   Web of Science ®Google Scholar
• Wu J, Ma Z-B, Shen W-L, et al. Influence of nitrogen in diamond films on plasma etching. Acta Phys Sin. 2013;62(7):075202.
   Google Scholar
• Weima JA, Fahrner WR, Zaitsev AM, et al. Surface characterization of thermochemically polished CVD diamond films. 3rd International Micro Materials Con­ference, Berlin, Germany, 2000, pp. 880–883.
   Google Scholar
• Liang YF, Zheng YT, Wei JJ, et al. Effect of grain boundary on polycrystalline diamond polishing by high-speed dynamic friction. Diamond Relat Mater. 2021;117:108461.
   Web of Science ®Google Scholar
• Ogawa Y, Ota M, Nakamoto K, et al. A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools. Cirp Annals-Manufacturing Technol. 2016;65(1):245–248.
   Web of Science ®Google Scholar
• Yoshida A, Deguchi M, Kitabatake M, et al. Atomic level smoothing of CVD diamond films by gas cluster ion beam etching, nuclear. Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 1996;112(1-4):248–251.
   Google Scholar
• Mallik AK, Bhar R, Bysakh S. An effort in planarising microwave plasma CVD grown polycrystalline diamond (PCD) coated 4 in. Si wafers. Mater Sci Semicond Process. 2016;43:1–7.
   Web of Science ®Google Scholar
• Zheng XF, Ma ZB, Zhang L, et al. Investigation on the etching of thick diamond film and etching asa pretreatment for mechanical polishing. Diamond Relat Mater. 2007;16(8):1500–1509.
   Web of Science ®Google Scholar
• Sun Y, Wang S, Tian S, et al. A low-temperature polishing technique for CVD diamond films by Ce-Mn alloys. Rare Metal Mater Engin. 2007;36:892–895.
   Web of Science ®Google Scholar
• Gogotsi Y, Baek C, Kirscht F. Raman microspectroscopy study of processing-induced phase transformations and residual stress in silicon. Semicond Sci Technol. 1999;14(10):936–944.
   Web of Science ®Google Scholar
• Pei ZJ, Fisher GR, Liu J. Grinding of silicon wafers: a review from historical perspectives. Int J Machine Tools & Manufacture. 2008;48(12–13):1297–1307.
   Web of Science ®Google Scholar
• Ali B, Litvinyuk IV, Rybachuk M. Femtosecond laser micromachining of diamond: current research status, applications and challenges. Carbon. 2021;179:209–226.
   Web of Science ®Google Scholar
• Wei C, Ma YP, Han Y, et al. Study on femtosecond laser processing characteristics of nano-crystalline CVD diamond coating. Appl Sci-Basel. 2019;9(20):4273.
   Web of Science ®Google Scholar
• Yan B, Chen N, He N, et al. Surface modeling and component analysis of picosecond laser ablation of CVD diamond. Diamond Relat Mater. 2021;111:108191.
   Web of Science ®Google Scholar
• Toros A, Kiss M, Graziosi T, et al. Reactive ion etching of single crystal diamond by inductively coupled plasma: state of the art and catalog of recipes. Diamond Relat Mater. 2020;108:107839.
   Web of Science ®Google Scholar
• Yuan Z, Jin Z, Wang K, et al. High-productivity ultraprecise polishing technique of CVD diamond film. Nanotechnol Precis Eng. 2011;9(5):451–458.
   Google Scholar
• Huang ST, Zhou L, Xu LF, et al. A super-high speed polishing technique for CVD diamond films. Diamond Relat Mater. 2010;19(10):1316–1323.
   Web of Science ®Google Scholar
• Roy S, Balla VK, Mallik A, et al. A comprehensive study of mechanical and chemo-mechanical polishing of CVD diamond. International Conference on Functional Nanomaterials (IC-FNM), Howrah, India, 2016, pp. 9846–9854.
   Google Scholar
• Wang J, Wang J. Mechanical lapping thick CVD diamond films. J Wuhan Institute of Technol. 2005;27(5):39–41.
   Google Scholar
• Cheng CY, Tsai HY, Wu CH, et al. An oxidation enhanced mechanical polishing technique for CVD diamond films. Diamond Relat Mater. 2005;14(3–7):622–625.
   Web of Science ®Google Scholar
• Kuhnle J, Weis O. Mechanochemical superpolishing of diamond using NaNO3 or KNO3 as oxidizing agents. Surf Sci. 1995;340(1–2):16–22.
   Web of Science ®Google Scholar
• Weima JA, Zaitsev AM, Job R, et al. Investigation of non-diamond carbon phases and optical centers in thermochemically polished polycrystalline CVD diamond films. J Solid State Electrochem. 2000;4(8):425–434.
   Web of Science ®Google Scholar
• Zhang H, Xu K, Yan Z, et al. Study on dynamic friction polishing of single crystal diamond. J Univ Chinese Acad Sci. 2023:78.
   Google Scholar
• Chen Y, Zhang LC, Arsecularatne JA. Polishing of polycrystalline diamond by the technique of dynamic friction. Part 2: material removal mechanism. Int J Mach Tools Manuf. 2007;47(10):1615–1624.
   Web of Science ®Google Scholar
• Gloor S, Luthy W, Weber HP, et al. UV laser polishing of thick diamond films for IR windows. Appl Surf Sci. 1999;138–139:135–139.
   Web of Science ®Google Scholar
• Chen C, Tsai H-L. Fundamental study of the bulge structure generated in laser polishing process. Opt Lasers Eng. 2018;107:54–61.
   Web of Science ®Google Scholar
• Prieske M, Vollertsen F. Picosecond-laser polishing of CVD-diamond coatings without graphite formation. Mater Today: Proc. 2021;40:1–4.
   Google Scholar
• Grogan DF, Zhao T, Bovard BG, et al. Planarizing technique for ion-beam polishing of diamond films. Appl Opt. 1992;31(10):1483–1487.
   PubMed Web of Science ®Google Scholar
• Hirata A, Tokura H, Yoshikawa M. Smoothing of chemically vapour deposited diamond films by ion beam irradiation. Thin Solid Films. 1992;212(1–2):43–48.
   Web of Science ®Google Scholar
• Ilias S, Sene G, Moller P, et al. Planarization of diamond thin film surfaces by ion beam etching at grazing incidence angle. Diamond Relat Mater. 1996;5(6–8):835–839.
   Web of Science ®Google Scholar
• Sirineni GMR, Naseem HA, Malshe AP, et al. Reactive ion etching of diamond as a means of enhancing chemically-assisted mechanical polishing efficiency. Diamond Relat Mater. 1997;6(8):952–958.
   Web of Science ®Google Scholar
• Zhou L, Huang ST, Wang XL, et al. High-speed mechanical lapping of CVD diamond films using diamond wheel. Int J Refractory Metals & Hard Mater. 2012;35:185–190.
   Web of Science ®Google Scholar
• Wang R, Chen N, Yan B, et al. Inert ambiance-assisted laser ablation of CVD diamond leads to enhanced surface quality and grindability. Ceram Int. 2023;49(1):1154–1164.
   Web of Science ®Google Scholar