6.0 REFERENCES
- Boothroyd , G. 1975 . Fundamentals of Metal Machining and Machine Tools New York : McGraw Hill .
- Taylor , F. W. 1906 . On the Art of Cutting Metals . Trans. ASME , 28 : 31
- Thangaraj , A. R. and Weinmann , K. J. 1992 . On the Wear Mechanisms and Cutting Performance of Silicon Carbide Whisker-Reinforced Alumina . J. Eng. Ind. , 114 : 301 – 308 .
- Ko , T. J. and Cho , D. W. 1994 . Tool Wear Monitoring in Diamond Turning by Fuzzy Pattern Recognition . J. Eng. Ind. , 116 : 225 – 232 .
- Elanayar , S. and Shin , Y. C. 1996 . Modeling of Tool Forces for Worn Tools: Flank Wear Effects . J. Manuf. Sci. Eng. , 118 : 359 – 366 .
- Ham , I. , Hoshi , T. and Thuering , F. L. 1965 . Performance of Tungsten Carbide, Titanium Carbide, and Oxide Tools in Finish Turning of C-30 Gray Iron . Trans. ASME , : 344 – 348 .
- Boothroyd , G. , Eagle , J. M. and Chisholm , A. W.J. 1967 . Effect of Tool Flank Wear on the Temperatures Generated During Metal Cutting, The 8th International M.T.D.R. Conference . September 1967 . pp. 1 – 14 .
- Pekelharing , A. J. and Hovinga , H. J. 1967 . Wear at the End Cutting Edge of Carbide Tools in Finish- and Rough-Turning, The 8th International M.T.D.R. Conference . September 1967 . pp. 1 – 9 .
- Kramer , B. M. 1987 . On Tool Materials for High Speed Machining . J. Eng. Ind. , 109 : 87 – 91 .
- Usui , E. , Shirakashi , T. and Kitagawa , T. 1984 . Analytical Prediction of Cutting Tool Wear . Wear , 100 : 129 – 151 .
- Koren , Y. 1978 . Flank Wear Model of Cutting Tools Using Control Theory . J. Eng. Ind. , 100 : 103 – 109 .
- Usui , E. , Shirakashi , T. and Kitagawa , T. 1978 . Analytical Prediction of Three Dimensional Cutting Process, Part 3, Cutting Temperature and Crater Wear of Carbide Tool . Trans. ASME , 100 : 236 – 243 .
- Oxley , P. L.B. , Hastings , W. F. and Stevenson , M. G. 1974 . Predicting Cutting Forces, Tool Life etc., Using Work Material Flow Stress Properties Obtained from High Speed Compression Tests . Proceedings Ynt Conference on Production . 1974 , Tokyo. pp. 528 – 534 .
- Leep , H. R. 1981 . Investigation of Synthetic Cutting Fluids in Drilling, Turning, and Milling Process . J. Am. Soc. Lubrication Eng. , : 715 – 722 .
- 1972 . Machining Data Handbook Cincinnati, OH : Machinability Data Centre Metcut Research Associates Inc. .
- Riad , M. S.M. , Safar , Z. S. and El-Hossainy , T. M. 1991 . The Effect of Cutting Fluids on the Mechanics of Cutting When Turning Steel 37 M.Sc. Dissertation, Department of Mechanical Design and Production, Faculty of Engineering, Cairo University .
- Riad , M. S.M. , Safar , Z. S. and El-Hossainy , T. M. The Prediction of Cutting Forces in the Presence of Cutting Fluids, AMPT'93 International Conference . August , Dublin.