Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 16, 2001 - Issue 2
Submit an article Journal homepage
149
Views
14
CrossRef citations to date
0
Altmetric
Original Articles

CHARACTERISTICS OF MICROCUTTING FORCE VARIATION IN ULTRAPRECISION DIAMOND TURNING

W. B. Lee Department of Manufacturing Engineering, The Hong Kong Polytechnic University Hung Hom, Kowloon, Hong KongCorrespondence[email protected]
,
C. F. Cheung Department of Manufacturing Engineering, The Hong Kong Polytechnic University Hung Hom, Kowloon, Hong Kong
&
S. To Department of Manufacturing Engineering, The Hong Kong Polytechnic University Hung Hom, Kowloon, Hong Kong
Pages 177-193 | Published online: 15 Aug 2006

8.0 REFERENCES

  • Ikawa , N. , Donaldson , R. R. , Komanduri , R. , König , W. , Aachen , T. H. , McKeown , P. A. , Moriwaki , T. and Stowers , I. F. 1991 . Ultra-precision Metal Cutting—The Past, the Present and the Future . Ann. CIRP , 40 ( 1 ) : 587 – 594 .
  • Donaldson , R. R. , Syn , C. K. and Taylor , J. S. 1985 . Annual Report FY85, LLNL UCID-19323-85-2 . Eng. Res. 1985 . pp. 69 – 85 .
  • Ikawa , N. , Shimada , S. and Morooka , H. 1987 . Technology of Diamond Tool for Ultraprecision Metal-Cutting . Bull. Jpn. Soc. Precis. Eng. , 21 ( 4 ) : 233 – 238 .
  • Nishiguchi , T. , Maeda , Y. , Masuda , M. and Sawa , M. 1988 . Mechanism of Micro Chip Formation in Diamond Turning of Al-Mg Alloy . Ann. CIRP , 37 ( 1 ) : 117 – 120 .
  • Moriwaki , T. and Okuda , K. 1989 . Machinability of Copper in Ultra-Precision Micro Diamond Cutting . Ann. CIRP , 38 ( 1 ) : 1115 – 1118 .
  • Iwata , K. , Moriwaki , T. and Okuda , K. 1987 . Precision Machining of Stainless-Steel with CBN Tool . Bull. Jpn. Soc. Precis. Eng. , 21 ( 2 ) : 134 – 135 .
  • Moriwaki , T. and Shamoto , E. 1991 . Ultraprecision Diamond Turning of Stainless Steel by Applying Ultrasonic Vibration . Ann. CIRP , 40 ( 1 ) : 559 – 562 .
  • Furukawa , Y. and Moronuki , N. 1988 . Effect of Material Properties on Ultra Precise Cutting Processes . Ann. CIRP , 37 ( 1 ) : 113 – 116 .
  • Lee , W. B. and Zhou , M. A. 1993 . Theoretical Analysis of the Effect of Crystallographic Orientation on Chip Formation in Micro-machining . Int. J. Machine Tools Manuf. , 33 : 439 – 447 .
  • Mulgrew , B. , Grant , P. and Thompson , J. 1999 . Digital Signal Processing: Concepts & Applications Basingstoke, , U.K. : Macmillan Press Ltd. .
  • Sata , T. 1964 . Surface Finish in Metal Cutting . Ann. CIRP , 12 : 190 – 197 .
  • Cheung , C. F. and Lee , W. B. 2000 . A Multi-spectrum Analysis of Surface Roughness Formation in Ultra-precision Machining . Precis. Eng. , 24 ( 1 ) : 77 – 87 .
  • Takasu , S. , Masuda , M. and Nishiguchi , T. 1985 . Influence of Study Vibration with Small Amplitude Upon Surface Roughness in Diamond Machining . Ann. CIRP , 34 ( 1 ) : 463 – 467 .
  • Sugano , T. and Takeuchi , K. 1987 . Diamond Turning of an Aluminium Alloy for Mirror . Ann. CIRP , 36 ( 1 ) : 17 – 20 .
  • Yuan , Z. J. , Lee , W. B. , Yao , Y. X. and Zhou , M. 1994 . Effect of Crystallographic Orientation on Cutting Forces and Surface Quality in Diamond Cutting of Single Crystal . Ann. CIRP , 43 ( 1 ) : 39 – 42 .
  • Lee , W. B. , Cheung , C. F. and To , S. J. 1999 . Materials Induced Vibration in Ultra-precision Machining . Mater. Proc. Technol. , 89–90 : 318 – 325 .
  • Lucca , D. A. , Rhorer , R. L. and Komanduri , R. 1991 . Energy Dissipation in the Ultraprecision Machining of Copper . Ann. CIRP , 40 ( 1 ) : 69 – 72 .
  • Williams , J. A. 1993 . Thin Films in Tribology Edited by: Dowson , D. New York : Elsevier .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.