Gravitational Effects on the Gas Tungsten Arc Welds of 304 Stainless Steels

References

• Chan , C. , Mazumder , J. and Chen , M.M. 1984 . A two-dimensional transient model for convection in laser melted pool . Metall. Trans. , 15A : 2175 – 2184 .
   Web of Science ®Google Scholar
• Kou , S. and Sun , D.K. 1985 . Fluid flow and weld penetration in stationary arc welds . Metall. Trans. , 16A : 203 – 213 .
   Web of Science ®Google Scholar
• Zacharia , T. , Eraslan , A.H. , Aidun , D.K. and David , S.A. 1989 . Three-dimensional transient model for arc welding process . Metall. Trans. , 20B : 645 – 659 .
   Web of Science ®Google Scholar
• Kang, N.; Singh, J.; Mahank, T.A.; Kulkarni, A.K. Gravitational effects on surface deformation and weld pool geometry during gas tungsten arc welding, Proceedings of the 5th ISHMT-ASME, 1074–1079, 3–5 January, 2002
   Google Scholar
• Kang , N. , Kulkarni , A.K. and Singh , J. June 2000 . Gravitational effects on the weld pool geometry during gas tungsten arc and laser welding . NASA microgravity Mat. Sci. Conf. , : 543 – 547 .
   Google Scholar
• Gooch , T.G. 1968 . Corrosion of AISI type 304 austenitic stainless steel . Br. Weld. J. , 15 : 345 – 357 .
   Web of Science ®Google Scholar
• Arata , Y. , Matsuda , F. and Katayama , S. 1976 . Fundamental investigation on solidification behavior of fully austenitic and duplex microstructures and effect of ferrite on microsegregation . Trans. JWRI , 5 ( 2 ) : 35 – 51 .
   Google Scholar
• Paton , B.E. 1972 . Welding in space . Weld. Eng. , 57 ( 1 ) : 25 – 29 .
   Google Scholar
• Okhotin, A.S.; Laptchinsky, V.F.; Shonin, G.S. Some results of studies in space technology in the USSR, COSPAR symposium on Materials Sciences in Space, 355–362, Philadelphia, PA, USA, 9–10 June, 1976
   Google Scholar
• Nance, M.; Jones, J.E. Welding, Brazing, and Soldering; ASM Handbook vol. 6, Materials Park, OH, 1020, 1993
   Google Scholar
• Mueller, R.E. The Effect of Low Gravity on Laser Keyhole Welding Dynamics. Ph.D. Thesis, York University, North York, Ontario, 1994
   Google Scholar
• Workman , G.L. and Kaukler , W.F. 1990 . Laser welding in reduced gravity . ICALEO'90 , : 430 – 440 .
   Google Scholar
• Aidun , D.K. and Martin , S.A. 1998 . Penetration in spot GTA welds during centrifugation . J. Mat. Eng. and Perf. (USA) , 7 ( 5 ) : 597 – 600 .
   Google Scholar
• Domey , J. , Aidun , D.K. , Ahmadi , G. , Regel , L.L. and Wilcox , W.R. 1995 . Numerical simulation of the effect of gravity on weld pool shape . Weld. J. , 74 ( 8 ) : 263s – 268s .
   Google Scholar
• Keanini , R.G. and Rubinsky , B. 1990 . Plasma arc welding under normal and zero gravity . Weld. J. , 69 ( 6 ) : 41 – 50 .
   Google Scholar
• Aidun , D.K. and Dean , J.P. 1999 . Effect of enhanced convection on the microstructure of Al-Cu-Li welds . Weld. J. , 78 ( 10 ) : 349s – 354s .
   Google Scholar
• Aidun , D.K. 2001 . Influence of simulated high-g on the weld size of Al-Li alloy . Acta Astronautica , 48 ( 2–3 ) : 153 – 156 .
   Google Scholar
• Yu , H. , Tandon , K.N. and Cahoon , J.R. 1997 . Solidification of hypereutectic Al-38 wt. pct Cu alloy in microgravity and in unit gravity . Metall. Mater. Trans. , 28A : 1245 – 1250 .
   Google Scholar
• Tensi , H.M. 1988 . Influence of microgravity on the morphology of the directionally solidified front in an AlSi alloy . Metall. Trans. , 19A : 2681 – 2686 .
   Google Scholar
• Battaile , C.C. , Grugel , R.N. , Hmelo , A.B. and Wang , T.G. 1994 . The effect of enhanced gravity levels on microstructural development in Pb-50 wt pct Sn alloys during controlled directional solidification . Metall. Mater. Trans. , 25A : 865 – 870 .
   Google Scholar
• Antar , B.N. and Nuotio-Antar , V.S. 1993 . Fundamentals of Low Gravity Fluid Dynamics and Heat Transfer 15 CRC Press Inc. .
   Google Scholar
• Cliff, G.; Lorimer, G.W. Quantitative analysis of thin metal foils using EMMA-4, the ratio technique, Proceedings of 5th European Congress on Electron Microscopy, Bristol, Institute of Physics, 1972, 140–141
   Google Scholar
• Cullity , B.D. 1978 . Elements of X-ray Diffraction , 2 309 Addison-Wesley Publishing Company, Inc. .
   Google Scholar
• David , S.A. , Goodwin , M. and Braski , D.N. 1979 . Solidification behavior of austenitic stainless steel filler metals . Weld. J. , 58 ( 11 ) : 330s – 336s .
   Google Scholar
• Smith , A.F. and Gibbs , G.B. 1969 . Volume and grain-boundary diffusion in 20Cr/25Ni/Nb stainless steel . Met. Sci. J. , 3 : 93 – 94 .
   Google Scholar
• Schaeffler , A.L. 1949 . Constitution diagram for stainless steel weld metal . Metals Progress , 56 : 680 – 680B .
   Google Scholar
• Davis J.R. Stainless Steels; ASM Specialty Handbook, Materials Park: Ohio, 1994; Vol. 577, 340–401
   Google Scholar
• Barnhouse , E.J. and Lippold , J.C. 1998 . Microstructure/property relationship in dissimilar welds between duplex stainless steels and carbon steels . Weld. J. , 77 ( 12 ) : 477s – 487s .
   Web of Science ®Google Scholar