Spray Dryer Modeling in Theory and Practice

References

• Friedman , S.J. , Gluckert , F.A. and Marshall , W.R. 1952 . Centrifugal disk atomization . Chemical Engineering Progress , 48 ( 4 ) : 181
   Google Scholar
• Herring , J.R. and Marshall , W.R. 1955 . Performance of vaned-disk atomizers . AIChE. J. ,
   Google Scholar
• Katta , S. and Gauvin , W.H. 1975 . Some fundamental aspects of spray drying . AIChE. J. , 21 ( 1 ) [CROSSREF]
   Google Scholar
• Gauvin , W.H. and Katta , S. 1976 . Basic concepts of spray dryer design . AIChE. J. , 22 ( 4 ) : 713 [CROSSREF]
   Google Scholar
• Keey , R.B. and Pham , Q.T. 1976 . Behaviour of spray dryers with nozzle atomizers . Chem. Engr. , 311 : 516
   Google Scholar
• Crowe , C.T. 1980 . “ Modelling spray-air contact in spray drying systems ” . In Advances in Drying Edited by: Mujumdar , A.S. Vol. 1 , New York, , USA : Hemisphere . Chapter 3
   Google Scholar
• Crowe , C.T. 1983 . Droplet-gas interaction in counter-current spray dryers . Drying Technology , 1 ( 1 )
   Google Scholar
• Papadakis , S.E. and King , C.J. 1988 . Air temperature and humidity profiles in spray drying. 1. Features predicted by particle-source-in-cell method and 2. Experimental measurements . Ind. Eng. Chem. Res. , 27 : 2111 – 2123 . [CSA]
   Google Scholar
• Oakley , D.E. and Bahu , R.E . Proceedings of the European Symposium on Computer Aided Process Engineering—2 (ESCAPE2) . Toulouse. Computational Modeling of Spray Dryers; Computers & Chemical Engineering 1992, Volume 17, Supplement ,
   Google Scholar
• Livesley , D.M. , Oakley , D.E. , Gillespie , R.F. , Elhaus , B. , Ranpuria , C.K. , Taylor , T. , Wood , W. and Yeoman , M.L. 1992 . “ Development and validation of a computational model for spray-gas mixing in spray dryers ” . In Drying '92 Edited by: Mujumdar , A.S. 407 – 416 . Amsterdam : Elsevier .
   Google Scholar
• Kievet , F.G. and Kerkhof , P.J.A.M. Using Computational Fluid Dynamics to Model Product Quality in Spray Drying: Air Flow; Temperature and Humidity Patterns in Drying ’96 . Proceedings of the 10th International Drying Symposium (IDS ’96) . Edited by: Mujumdar , A.S. pp. 259 – 266 . Poland : Krakow .
   Google Scholar
• Langrish , T.A.G. and Zbincinski , I. 1994 . The effect of air inlet geometry and spray cone angle on the wall deposition rate in spray dryers . Trans. IChemE , 72 ( A ) : 420 – 430 . [CSA]
   Google Scholar
• Keey , R.B. 1992 . Drying of Loose and Particulate Materials New York : Hemisphere .
   Google Scholar
• Langrish , T.A.G. and Kockel , T.K. 2001 . The assessment of a characteristic drying curve for milk powder for use in computational fluid dynamics modeling . Chemical Engineering Journal , 84 : 69 – 74 . [CROSSREF]
   Google Scholar
• Wijlhuizen , A.E. , Kerkhof , P.J.A.M. and Bruin , S. 1979 . Theoretical study of the inactivation of phosphate during spray drying of skim milk . Chemical Engineering Science , 34 : 651 – 660 . [CROSSREF]
   Google Scholar
• Stevenson , M.J. , Chen , X.D. and Fletcher , D. 1998 . Modelling the Drying of Milk Queensland, , Australia : CHEMECA 98 .
   Google Scholar
• Cheong , H.W. , Jeffreys , G.V. and Mumford , C.J. 1986 . A receding interface model for the drying of slurry droplets . AIChE Journal , 32 : 1334 – 1346 . [CROSSREF]
   Google Scholar
• Farid , M. 2003 . A new approach to modeling of single droplet drying . Chemical Engineering Science , 58 : 2985 – 2993 . [CROSSREF] [CSA]
   Google Scholar
• Masters , K. 1991 . Spray Drying Handbook, , 5th Ed. England : Longman Scientific & Technical .
   Google Scholar
• Charlesworth , D.H. and Marshall , W.R. 1960 . AIChE J. , 6 : 9 [CROSSREF]
   Google Scholar
• Walton , D.E. and Mumford , C.J. 1999 . The morphology of spray-dried particles . Trans. IChemE , 77 ( Part A )
   Google Scholar
• King , C.J. 1995 . Spray drying: retention of volatile compounds revisited . Drying Technology , 13 ( 5–7 ) : 1221 – 1240 .
   Google Scholar
• Coumans , W.J. , Kerkhof , P.J.A.M. and Bruin , S. 1994 . Theoretical and practical aspects of aroma retention in spray drying and freeze drying . Drying Technology , 12 ( 1–2 ) : 99 – 149 .
   Google Scholar
• Kemp , I.C. and Oakley , D.E. 2002 . Modelling of particulate drying in theory and practice . Drying Technology , 20 ( 9 ) : 1699 – 1750 . [CROSSREF]
   Google Scholar
• Papadakis , S.E. , Bahu , R.E. , McKenzie , K.A. and Kemp , I.C. 1993 . Correlations for the equilibrium moisture content of solids . Drying Technology , 11 ( 3 ) : 543 – 553 . [CSA]
   Google Scholar
• Langrish , T.A.G. and Kockel , T.K. 2001 . The assessment of a characteristic drying curve for milk powder for use in computational fluid dynamic modeling . Chemical Engineering Journal , 84 : 69 – 74 . [CROSSREF]
   Google Scholar
• Ozmen , L. and Langrish , T.A.G. 2003 . A study of the limitations to spray dryer outlet performance . Drying Technology , 21 ( 5 ) : 895 – 917 . [CROSSREF]
   Google Scholar
• Huber , R.A. Spray Dryer Design Programs (SPRY1 and SPRY2) , Research Report RR17 . Separation Processes Service (SPS) now in The Process Manual, Aspentech, Harwell, UK, 1982
   Google Scholar
• Robinson , R.A. and Huber , R.A. Spray Dryer Experiments 1983–85 and Testing of the SPRY1 Computer Code , Research Report RR39 . Separation Processes Service (SPS) now in The Process Manual, Aspentech, Harwell, UK, 1989
   Google Scholar
• Robinson , R.A. and Huber , R.A. Spray Dryer Experiments 1986–88 and Testing of the SPRY1 Computer Code , Research Report RR63 . Separation Processes Service (SPS) now in The Process Manual, Aspentech, Harwell, UK, 1989
   Google Scholar
• Ranz , W.E. and Marshall , W.R. 1952 . Evaporation from droplets . Chem. Eng. Prog. , 48 ( 3–4 )
   Google Scholar