Upper Bound Analysis of Turning Using Sharp Corner Tools

References

• Adibi-Sedeh , A. H. , Madhavan , V. and Bahr , B. 2002 . Upper bound analysis of oblique cutting with nose radius tools . Int. J. Mach. Tools Manufact. , 42 ( 9 ) : 1081 – 1094 . [CSA]
   Google Scholar
• Adibi-Sedeh , A. H. , Madhavan , V. and Bahr , B. 2003 . Upper bound analysis of oblique cutting: improved method of calculating the friction area . Int. J. Mach. Tools Manufact. , 43 ( 5 ) : 485 – 492 . [CROSSREF] [CSA]
   Google Scholar
• Armarego , E. J. A. 1967 . Cutting with double edge tools: symmetrical triangular cuts . Int. J. Mach. Tool Des. Res. , 7 : 23 [CROSSREF]
   Google Scholar
• Armarego , E. J. A. and Brown , R. H. 1969 . The Machining of Metals Englewood Cliffs, NJ : Prentice Hall .
   Google Scholar
• Armarego , E. J. A. and Wiriyacosol , S. 1978a . Oblique machining with triangular form tools-I. Theoretical investigation . Int. J. Mach. Tool Des. Res. , 18 : 67 – 80 . [CROSSREF]
   Google Scholar
• Armarego , E. J. A. and Wiriyacosol , S. 1978b . Oblique machining with triangular form tools-II. Experimental investigation . Int. J. Mach. Tool Des. Res. , 18 : 153 – 165 . [CROSSREF]
   Google Scholar
• Colwell , L. V. 1954 . Prediction of the chip flow for single cutting point cutting tools . Trans. ASME , 76 : 199 – 204 .
   Google Scholar
• Connolly , R. and Rubenstein , C. 1968 . The mechanics of continuous chip formation in orthogonal cutting . Int. J. Mach. Tool Des. Res. , 8 : 159 – 187 . [CROSSREF]
   Web of Science ®Google Scholar
• Dogra , A. J. S. , Kapoor , S. G. and Devor , R. E. 2002 . Mechanistic model for tapping process with emphasis on process faults and hole geometry . J. Manuf. Sci. Eng. , 124 : 18 – 25 . [CROSSREF] [CSA]
   Google Scholar
• Henderer , W. E. 1977 . On the mechanics of tapping by cutting . J. Eng. Ind. , 99 : 257 – 262 .
   Google Scholar
• Hu , R. S. , Mathew , P. , Oxley , P. L. B. and Young , H. T. 1986 . Allowing for end cutting edge effects in predicting forces in bar turning with oblique machining conditions . Proc. Inst. Mech. Eng. , 200 ( part C ) : 89 – 99 .
   Google Scholar
• Kapoor , S. G. , Devor , R. E. , Zhu , R. , Gajjela , R. , Prakkal , G. and Smithey , D. 1998 . Development of mechanistic models for the prediction of machining performance: model building methodology . Machining Science and Technology , 2 : 213 – 238 . [CSA]
   Web of Science ®Google Scholar
• Lin , G. C. I. , Mathew , P. , Oxley , P. L. B. and Watson , A. R. 1982 . Predicting cutting forces for oblique machining conditions . Proc. Inst. Mech. Eng. , 196 : 141 – 148 .
   Web of Science ®Google Scholar
• Lin , G. C. I. and Oxley , P. L. B. 1972 . Mechanics of oblique machining: predicting chip geometry and cutting forces from work material properties and cutting conditions . Proc. Inst. Mech. Eng. , 186 : 813 – 820 .
   Google Scholar
• Merchant , M. E. 1945 . Mechanics of the metal cutting process . J. Appl. Phys. , 16 ( 5 ) : 267
   Web of Science ®Google Scholar
• Okushima , K. and Minato , K. 1959 . On the behavior of chip in steel cutting . Bull. Jap. Soc. Mech. Eng. , 2 : 58 – 64 .
   Google Scholar
• Seethaler , R. J. and Yellowley , I. 1997 . An upper-bound cutting model for oblique cutting tools with a nose radius . Int. J. Mach. Tools Manufact. , 37 ( 2 ) : 119 – 134 . [CROSSREF] [CSA]
   Web of Science ®Google Scholar
• Shamoto , E. and Altintas , Y. 1999 . Prediction of shear angle in cutting with maximum shear stress and minimum energy principles . J. Manuf. Sci. Eng. , 121 : 399 – 407 . [CSA]
   Web of Science ®Google Scholar
• Shaw , M. C. , Cook , N. H. and Smith , P. A. 1952 . The mechanics of three dimensional cutting operations . Trans. ASME , 74 : 1055 – 1064 .
   Google Scholar
• Stabler , G. V. The chip flow law and it consequences . Proceedings 5th International Machine Tool Design Research Conference . pp. 243 – 251 . Oxford : Pergamon Press .
   Google Scholar
• Stabler , G. V. 1951 . The fundamental geometry of cutting tools . Proc. Inst. Mech. Eng. , 165 : 14 – 21 .
   Google Scholar
• Stephenson , D. A. and Wu , S. M. 1988 . Computer models for the mechanics of three-dimensional cutting processes—Part I: theory and numerical method . J. Eng. Ind. , 110 : 32 – 37 .
   Google Scholar
• Suzuki , T. , Ariura , Y. and Umezaki , Y. 1993 . Basic study on cutting forces in gear cutting: theory of cutting with two continuous symmetrical cutting edges . JSME International Journal , 36 : 543 – 549 .
   Google Scholar
• Usui , E. , Hirota , A. and Masuko , M. 1978 . Analytical predictions of three dimensional cutting process Part 1: basic cutting model and energy approach . J. Eng. Ind. , 100 : 222 – 228 .
   Web of Science ®Google Scholar
• Venuvinod , P. K. 1996 . Three-dimensional cutting force analysis based on the lower boundary of the shear zone Part 2: two edge oblique cutting . Int. J. Mach. Tools Manufact. , 36 : 325 – 338 . [CROSSREF] [CSA]
   Google Scholar
• Venuvinod , P. K. and Jin , W. L. 1996 . Three-dimensional cutting force analysis based on the lower boundary of the shear zone. Part 1: single edge oblique cutting . Int. J. Mach. Tools Manufact. , 36 : 307 – 323 . [CROSSREF] [CSA]
   Google Scholar
• Young , H. T. , Mathew , P. and Oxley , P. L. B. 1987 . Allowing for nose radius effects in predicting the chip flow direction, Cutting forces in bar turning . Proc. Inst. Mech. Eng. , 201 ( C3 ) : 213 – 226 .
   Google Scholar
• Zorev , N. N. 1966 . Metal Cutting Mechanics Pergamon Press .
   Google Scholar