ON THE NATURE OF MACHINING CRACKS IN GROUND CERAMICS: PART II, COMPARISON TO OTHER SILICON NITRIDES AND DAMAGE MAPS

REFERENCES

• Quinn , G.D. , Ives , L.K. , and Jahanmir , S. ( 2003 ). On the Nature of Machining Cracks in Ground Ceramics, Part I: SRBSN Strengths and Fractographic Analysis . Machining Science and Technology , 9 ( 2 ): 169 – 210 .
   Google Scholar
• Jahanmir , S. , Strakna , T. , Quinn , G. , Liang , H. , Allor , R. , and West , R. ( 1993 ) . Effect of Grinding on Strength and Surface Integrity of Silicon Nitride: Part I . In Machining of Advanced Materials , S. Jahanmir , ed., NIST SP 847 , Gaithersburg , MD , pp. 263 – 278 .
   Google Scholar
• Jahanmir , S. , Strakna , T. , Quinn , G. , Kopp , R. , Yoon , S. , Kumar , K. ( 1993 ) . Effect of Grinding on Strength and Surface Integrity of Silicon Nitride: Part II . pp. 279 – 294 .
   Google Scholar
• Jahanmir , S. , Ives , L.K. , Gill , L. , and Filliben , J. ( 1996 ) . Effect of Grinding on Strength of a Sintered Reaction Bonded Silicon Nitride . VDI Berichte , 1276 : 603 – 615 .
   Google Scholar
• Ives , L.K. , Jahanmir , S. , Gill , L.M. , Filliben , J. ( 1998 ). Effect of Grinding on Strength of a Sintered Reaction-Bonded Silicon Nitride . Interceram , 47 ( 3 ): 168 – 173 . [CSA]
   Google Scholar
• Xu , H.K. , Jahanmir , S. , and Ives , L.K. ( 1996 ). Material Removal and Damage Formation Mechanisms in Grinding Silicon Nitride . Journal of Materials Research , 11 ( 7 ): 1717 – 1724 . [CSA]
   Web of Science ®Google Scholar
• Strakna , T.J. , Jahanmir , S. , Allor , R.L. , and Kumar , K.V. ( 1996 ). Influence of Grinding Direction on Fracture Strength of Silicon Nitride . Transactions of the ASME; Journal of Engineering Materials Technology. , 118 : 358 – 365 . [CSA]
   Google Scholar
• Xu , H. , Jahanmir , S. , and Ives, L. Effect of Machining Conditions on the Strength of Sintered Reaction Bonded Silicon Nitride . NIST Ceramic Machining Consortium Semiannual Report, Sept. 27 – 28 , 1995 , NIST , Gaithersburg , MD , 1995 .
   Google Scholar
• Pyzik , A.J. , Carroll , D.F. , Hwang , C.J. , and Prunier , A.R. ( 1992 ) . Self Reinforced Silicon Nitride—A New Microengineered Ceramic . In 4th International Symposium on Ceramic Materials and Components for Engines , R. Carlsson , T. Johansson , and L. Kahlman , eds., Elsevier , New York , pp. 584 – 593 .
   Google Scholar
• Pyzik , A.J. and Beaman , D.R. (1993). Microstructure and Properties of Self-Reinforced Silicon Nitride. Journal of the American Ceramic Society , 76(11):2737–2744. [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Quinn , G.D. , Swab , J.J. , and Motyka , M.J. ( 2003 ). Fracture Toughness of a Toughened Silicon Nitride by ASTM C 1421 . Journal of the American Ceramic Society , 86 ( 6 ): 1043 – 1045 . [CSA]
   Google Scholar
• Quinn , G.D. , Swab , J.J. , and Hill , M.D. ( 1997 ). Fracture Toughness by the Surface Crack in Flexure (SCF) Method: New Test Results . Ceramic Engineering and Science Proceedings , 18 ( 4 ): 163 – 172 .
   Google Scholar
• Quinn , G.D. , Xu , K. , Gettings , R.J. , Salem , J.A. , and Swab , J.J. ( 2002 ) . Does Anyone Know the Real Fracture Toughness? SRM 2100: The World's First Ceramic Fracture Toughness Reference Material . In Fracture Resistance Testing of Monolithic and Composite Brittle Materials, ASTM STP 1409 , J.A. Salem , G.D. Quinn , and M.G. Jenkins , eds., ASTM , West Conshohocken , PA , 76 – 93 .
   Google Scholar
• ASTM C 1326-99 ( 2001 ) . Standard Test Method for Knoop Hardness of Advanced Ceramics , Annual Book of Standards , Vol. 15.01 , ASTM , West Conshohocken , PA .
   Google Scholar
• ASTM C 1327-99 , Standard Test Method for Knoop Hardness of Advanced Ceramics , ibid .
   Google Scholar
• ASTM C 1421-99 , Standard Test Method for the Determination of Fracture Toughness of Advanced Ceramics . idem. .
   Google Scholar
• Hollstein , T. , Pfeiffer , W. , Rombach , M. , and Thielicke , B. ( 1996 ) . Analysis of Machining Damage in Engineering Ceramics by Fracture Mechanics, Fractography and X-Ray Diffraction . In Fractography of Glasses and Ceramics, III , Ceramic Transactions , Vol. 64 , J. Varner , V. Fréchette , and G. Quinn , eds., ACS , Westerville , OH , pp. 145 – 169 .
   Google Scholar
• Mizuno , S. , Kobayashi , N. , and Miyata , K. ( 1993 ) . Analysis of Sintered Silicon Nitride Grinding Damage . Society of Automotive Engineers Paper 930163, March 1993 , SAE , Warrendale , PA .
   Google Scholar
• Marshall , D.B. , Evans , A.G. , Khuri Yakub , B.T. , Tien , J.W. , and Kino , G.S. ( 1983 ) . The Nature of Machining Damage in Brittle Materials . Proceedings of the Royal Society of London , A385 461 – 475 .
   Google Scholar
• Kanematsu , W. , Sando , M. , Ives , L.K. , Marinenko , R. , and Quinn , G.D. ( 2001 ). Determination of Machining Crack Geometry by Dye Penetration Technique . Journal of the American Ceramic Society , 84 ( 4 ): 795 – 800 . [CSA]
   Google Scholar
• Alfaro , E.S. , Guiheen , J.V. , and Varner , J.R. ( 1991 ) . Insights Provided by Fractography in Strength Testing of Machined Si3N4 and Indented Al2O3 . In Fractography of Glasses and Ceramics, II , V.D. Frechette and J.R. Varner , eds., Ceramic Transactions , Vol. 17 , American Ceramic Society , Westerville , OH , pp. 485 – 508 .
   Google Scholar
• Quinn , G.D. ( 1980 ) . Unpublished Research , Watertown Arsenal, Watertown , MA .
   Google Scholar
• Foley , M.R. , Pujari , V.K. , Sales , L.C. , and Tracey , D.M. ( 1994 ) . Silicon Nitride Tensile Strength Database from Ceramic Technology Program Processing for Reliability Project . In Life Prediction Methodologies and Data for Ceramic Materials , ASTM STP 1201 , C.R. Brinkman and S.F. Duffy , eds., ASTM , West Conshohocken , PA , pp. 3 – 18 .
   Google Scholar
• Pujari , V.K. , Tracey , D.M. , Foley , M.R. , Paille , N.I. , Pelletier , P.J. , Sales , L.C. , Wilkins , C.A. , and Yeckley , R.L. ( 1983 ) . Development of Improved Processing and Evaluation Methods for High Reliability Structural Ceramics for Advanced Heat Engine Applications, Phase I . Oak Ridge National laboratory Technical Report, ORNL/Sub/89-SB182/1, Aug .
   Google Scholar
• Richerson , D.W. , Yonushonis , T.M. , and Weaver , G.Q. ( 1978 ) . Figure 6 in Properties of Silicon Nitride Rotor Blade Materials . In Proceedings of the 1977 DARPA/NAVSEA Ceramic Gas Turbine Demonstration Engine Program Review , Castine , Maine , J.J. Fairbanks and R.W. Rice , eds., Metals and Ceramics Information Center MCIC Report 78 – 36 , Battelle, Columbus , OH , pp. 193 – 218 .
   Google Scholar
• Mörgenthaler , K. ( 1989 ) . Damage Depths and Machining Removal Amounts, Example for NC 132 for a Particular Grinding Machine . Private Communication .
   Google Scholar
• Anderson , C.A. and Bratton , R.J. ( 1979 ) . Effect of Surface Finish on the Strength of Hot-Pressed Silicon Nitride . In The Science of Ceramic Machining and Surface Finishing II . B.J. Hockey and R.W. Rice eds., National Bureau of Standards Special Publication 562 , Gaithersburg , MD , pp. 463 – 476 .
   Google Scholar
• Quinn , G.D. and Quinn , J.B. ( 1983 ) . Slow Crack Growth in Hot-Pressed Silicon Nitride . In Fracture Mechanics of Ceramics , Vol. 6 , R.C. Bradt , A.G. Evans , D.P.H. Hasselman , and F.F. Lange , eds., Plenum , NY , pp. 603 – 636 .
   Google Scholar
• Quinn , G.D. ( 1990 ). Fracture Mechanism Maps for Advanced Structural Ceramics, Part 1, Methodology and Hot-Pressed Silicon Nitride Results . Journal of Materials Science , 25 : 4361 – 4376 . [CROSSREF]
   Web of Science ®Google Scholar
• Allor , R.L. and Baker , R.R. ( 1983 ) . Effect of Grinding Variables on Strength of Hot Pressed Silicon Nitride . American Society of Mechanical Engineers , Paper 83-GT-203 , ASME , NY .
   Google Scholar
• Allor , R.L. , Govila , R.K. , and Whalen , T.J. (1982). Influence of Machining on Strength Properties of Turbine Materials. Ceramic Engineering and Science Proceedings , 3:392–404.
   Google Scholar
• Wu , C.C. and McKinney , K.R. ( 1979 ) . The Effect of Surface Finishing on the Strength of Commercial Hot Pressed Si3N4 . In The Science of Ceramic Machining and Surface Finishing II , B. J. Hockey and R. W. Rice , eds., National Bureau of Standards Special Publication 562 , Gaithersburg , MD , pp. 477 – 481 .
   Google Scholar
• Breder , K. , Wereszczak , A.A. , and Andrews , M.J. ( 1998 ). Exploration of the Weibull Modulus as a Function of Surface Preparation and Flexure Testing Conditions . Ceramic Engineering and Science Proceedings , 19 ( 4 ): 89 – 97 .
   Google Scholar
• Ota , M. and Miyahara , M. ( 1990 ) . The Influence of Grinding on the Flexural Strength of Ceramics . 4th Int. Grinding Conference of the Society of Manufacturing Engineers , Vol. 2 , paper MR90-538 .
   Google Scholar
• Mayer , Jr. J.E. and Fang , G.P. ( 1993 ) . Diamond Grinding of Silicon Nitride Ceramic . In Machining of Advanced Materials , S. Jahanmir , ed., NIST SP 847 , Gaithersburg , MD , pp. 205 – 222 .
   Google Scholar
• Mayer , Jr. J.E. and Fang , G.P. ( 1994 ). Effect of Grit Depth of Cut on Strength of Ground Ceramics . Annals of the CIRP , 43 ( 1 ): 309 – 312 .
   Google Scholar
• Thomas , M.B. , West , R.D. , West , Jr. W.E. , and Wyckoff , K. ( 1985 ) . Effects of Machining Parameters on the Surface Finish and Strength of Hot-Pressed Silicon Nitride . Therm Inc. , Ithaca , NY .
   Google Scholar
• Ives , L.K. , Evans , C.J. , Jahanmir , S. , Polyani , R.S. , Strakna , T.J. , and McGloufin , M.L. ( 1993 ) . Effect of Ductile-Regime Grinding on the Strength of Hot-Isostatically Pressed Silicon Nitride . In Machining of Advanced Materials , S. Jahanmir , ed., NIST SP 847 , Gaithersburg , MD , pp. 341 – 352 .
   Google Scholar
• Newman , Jr. J.C. and Raju , I.S. ( 1981 ). An Empirical Stress-Intensity Factor Equation for the Surface Crack . Engineering Fracture Mechanics , 15 ( 1–2 ): 185 – 192 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Rice , R.W. ( 1988 ) . Fracture Initiation in Ceramics. Challenges to NDE and Processing . In Ceramic Developments , C. Sorrell and B. Ben-Nissan , eds. Materials Science Forum Vols. 34–36, Trans. Tech Publ. , Switzerland , pp. 1057 – 1064 .
   Google Scholar
• Fett , T. , Munz , D. , Kounga , A.B. , Rödel , J. , Quinn , G.D. , and White , K. ( 2003 ) . Bridging Stresses in Sintered Reaction Bonded Si3N4 from COD Measurements . Subm. to 7th International Conference on the Fracture Mechanics of Glasses and Ceramics, Houston , Plenum , NY , 2005 .
   Google Scholar
• Kounga , A.B. , Fett , T. , Rödel , J. , and Quinn , G.D. ( 2004 ). Crack Tip Toughness Measurements on Sintered Reaction Bonded Si3N4. Subm to Journal of the American Ceramic Society , 87 ( 8 ): 1502 – 1508 . [CSA]
   Google Scholar
• Fett , T. and Munz , D. ( 1993 ). Evaluation of R-curve Effects in Ceramics . Journal of Materials Science , 28 : 742 – 752 . [CROSSREF]
   Google Scholar
• Chand , R. 2002 . Private communication ,
   Google Scholar
• Koepke , B.G. and Stokes , R.J. ( 1979 ) . Effect of Workpiece Properties on Grinding Forces in Polycrystalline Ceramics . In The Science of Ceramic Machining and Surface Finishing II , B.J. Hockey and R. W. Rice , eds., National Bureau of Standards Special Publication 562 , pp. 75 – 91 .
   Google Scholar
• Xu , H.H.K. , Padture , N.P. , and Jahanmir , S. ( 1995 ). Effect of Microstructure on Material Removal Mechanisms and Damage Tolerance in Abrasive Machining of Silicon Carbide . Journal of the American Ceramic Society , 78 ( 9 ): 2442 – 2448 .
   Google Scholar
• Xu , H.H.K. , Jahanmir , S. , Ives , L.K. , Job , L.S. , and Ritchie , K.T. ( 1996 ). Short-Crack Toughness and Abrasive Machining of Silicon Nitride . Journal of the American Ceramic Society , 79 ( 12 ): 3055 – 3064 . [CSA]
   Web of Science ®Google Scholar
• Marshall , D.B. , Lawn B.R. , and Cook , R.F. ( 1987 ). Microstructural Effects on Grinding of Alumina and Glass-Ceramics . Journal of the American Ceramic Society , 70 ( 6 ): C139 – C140 . [CROSSREF]
   Google Scholar
• Wobker , H.G. and Tonshoff , H.K. ( 1993 ) . High Efficiency Grinding of Structural Ceramics. In Machining of Advanced Materials , S. Jahanmir , ed., NIST SP 847 , Gaithersburg , MD , pp. 171 – 183 .
   Google Scholar
• Kirchner , H.P. and Conway , Jr., J.C. ( 1986 ) . Mechanisms of Material Removal and Damage Penetration During Single Point Grinding of Ceramics . In Machining of Ceramic Materials and Components , K. Subramanian and R. Komanduri , eds., Amer. Soc. of Mech. Eng. , New York , pp. 53 – 61 .
   Google Scholar
• Pfeiffer , W. and Hollstein , T. ( 1993 ) . Damage Determination and Strength Prediction of Machined Surfaces by X-ray Diffraction Techniques . In Machining of Advanced Materials , S. Jahanmir , eds., NIST SP 847 , Gaithersburg , MD , pp. 235 – 245 .
   Google Scholar
• Samuel , R. , Chandrasekar , S. , Farris , T.N. , and Licht , R.H. ( 1989 ). Effect of Residual Stresses on the Fracture of Ground Ceramics . Journal of the American Ceramic Society , 72 ( 10 ): 1960 – 1966 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Johnson-Walls , D. , Evans , A.G. , Marshall , D.B. , and James , M.R. (1986). Residual Stresses in Machined Ceramic Surfaces. Journal of the American Ceramic Society , 69(1):44–47. [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Shand , E.R. ( 1965 ). Strength of Glass – The Griffith Method Revised . Journal of the American Ceramic Society , 48 ( 1 ): 43 – 49 .
   Google Scholar
• Kirchner , H.P. , Gruver , R.M. , and Walker , R.E. ( 1972 ) . Strength Effects Resulting from Simple Surface Treatments . In The Science of Ceramic Machining and Surface Finishing , NBS Special Publication 348 , S. Schneider and R. Rice , eds., National Bureau of Standards , Gaithersburg , MD , pp. 353 – 363 .
   Google Scholar
• Kirchner , H.P. , Gruver , R.M. , and Richard , D.M. ( 1979 ) . Fragmentation and Damage Penetration During Abrasive Machining of Ceramics . In The Science of Ceramic Machining and Surface Finishing II , B. J. Hockey and R.W. Rice , eds., National Bureau of Standards Special Publication 562 , Gaithersburg , MD , 23 – 42 .
   Google Scholar
• Kirchner , H.P. and Conway , Jr., J.C. ( 1986 ) . Mechanisms of Material Removal and Damage Penetration During Single Point Grinding of Ceramics . In Machining of Ceramic Materials and Components , K. Subramanian and R. Komanduri , eds., Amer. Soc. of Mech. Eng. , New York , 53 – 61 .
   Google Scholar
• Schinker , M.G. and Döll , W. ( 1985 ) . Plasticity and Fracture Induced by Scratching Optical Glass at High Speeds . In Strength of Inorganic Glass , C.R. Kurkjian , ed., Plenum , NY , 115 – 133 .
   Google Scholar
• Rice , R.W. and Mecholsky , Jr., J.J. ( 1979 ) . The Nature of Strength Controlling Machining Flaws in Ceramics . In The Science of Ceramic Machining and Surface Finishing II , B.J. Hockey and R.W. Rice , eds., National Bureau of Standards Special Publication 562 , Gaithersburg , MD , 351 – 378 .
   Google Scholar
• Rice , R.W. ( 1993 ) . Effects of Ceramic Microstructural Character on Machining Direction–Strength Anisotropy . In Machining of Advanced Materials , S. Jahanmir , ed., NIST SP 847 , Gaithersburg , MD , 223 – 234 .
   Google Scholar
• Quinn , G.D. and Wirth , G. ( 1989 ). Biaxial Stress Rupture of Silicon Nitride . Materials Science and Engineering , A109 : 147 – 152 .
   Google Scholar
• Malkin , S. and Huerta , M. ( 1979 ) . Glass Grinding Mechanisms and Influence on the Finish Surface and Strength . In The Science of Ceramic Machining and Surface Finishing II , B.J. Hockey and R.W. Rice , eds., National Bureau of Standards Special Publication 562 , Gaithersburg , MD , 93 – 106 .
   Google Scholar
• Quinn , G.D. and Quinn , J.B. ( 1983 ) . Slow Crack Growth in Hot-Pressed Silicon Nitride . In Fracture Mechanics of Ceramics , Vol. 6 , R.C. Bradt , A.G. Evans , D.P.H. Hasselman , and F.F. Lange , eds., Plenum , NY , 603 – 636 .
   Google Scholar
• Salem , J.A. , Nemeth , N.N. , Powers , L.M. , and Choi , S.R. Reliability Analysis of Uniaxially Ground Brittle Materials . Transaction of the ASME , paper 95-GT-31, ASME , 1995 .
   Google Scholar
• Thomas , M.B. , West R.D. , and West , Jr., W.E . ( 1986 ) . Grinding Hot Pressed Silicon Nitride for Optimum Surface Finish and Strength . Unpublished private communication .
   Google Scholar
• Rice , R.W. ( 2000 ) . Mechanical Properties of Ceramics and Composites, Grain and Particle Effects , Marcel Dekker , New York .
   Google Scholar
• Rice , R.W. ( 1993 ) . Effects of Ceramic Microstructural Character on Machining Direction–Strength Anisotropy . In Machining of Advanced Materials , S. Jahanmir , ed., NIST SP 847 , Gaithersburg , MD , 185 – 204 .
   Google Scholar
• Xu , H.H.K. , Wei , L. , and Jahanmir , S. ( 1996 ). Influence of Grain Size on the Grinding Response of Alumina . Journal of the American Ceramic Society , 79 ( 5 ): 1307 – 1313 . [CSA]
   Google Scholar
• Li , K. and Liao , T.W. ( 1996 ). Surface/Subsurface Damage and the Fracture Strength of Ground Ceramics . Journal of Materials Process Technology , 57 : 207 – 220 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Kanematsu , W. , Yamauchi , Y. , Ohji , T. , Ito , S. , and Kubo , K. ( 1992 ). Formulation of the Effect of Surface Grinding on Strength Degradation of Ceramics . Journal of the Ceramic Society of Japan , 100 ( 6 ): 775 – 779 . [CSA]
   Google Scholar
• MIL STD 1942 (MR) ( 1983 ) . Flexural Strength of High Performance Ceramics at Ambient Temperature . 21 Nov. 1983, U. S. Army Materials Research Center , Watertown , MA . (This standard was superceded by ASTM C 1161 in May 1998.)
   Google Scholar
• ASTM C 1161-96 , ( 2001 ) . Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature . Annual Book of Standards , Vol. 15.01 , ASTM , West Conshohocken , PA .
   Google Scholar
• ISO 14704 ( 2000 ) . Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics)–Test Method for Flexural Strength of Monolithic Ceramics at Room Temperature . International Organization for Standards , Geneva , SW .
   Google Scholar
• ASTM F 417-75 ( 2001 ) . Standard Test Method for Flexural strength (Modulus of rupture) of Electronic-Grade Ceramics . Annual Book of Standards , Vol. 15.02 , ASTM , West Conshohocken , PA .
   Google Scholar
• ASTM C 1495–01 ( 2001 ) . Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics . Annual Book of Standards , Volume 15.01 , ASTM , West Conshohocken , PA .
   Google Scholar
• Quinn , G.D. ( 1990 ). Flexure Strength of Advanced Structural Ceramics: A Round Robin . Journal of the American Ceramic Society , 73 ( 8 ): 2374 – 2384 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Rice , R.W. ( 2002 ). Monolithic and Composite Ceramic Machining Flaw-Microstructure-Strength Effects: Model Evaluation . Journal of the European Ceramic Society ., 22 : 1411 – 1424 . [CSA] [CROSSREF]
   Google Scholar
• Marshall , D.B. ( 1984 ) . Failure from Surface Flaws . In Fracture in Ceramic Materials: Toughening Mechanisms, Machining Damage, Shock , A.G. Evans , ed., Noyes Publ , NY , pp. 190 – 220 .
   Google Scholar