36
Views
3
CrossRef citations to date
0
Altmetric
Original Articles

Estimation of Maximum Possible Wave Heights in Surf Zone

, &
Pages 1550001-1-1550001-19 | Received 20 Apr 2014, Accepted 12 Jan 2015, Published online: 10 Jan 2018

References

  • Allsop, N. W. H. & Durand, N. [1999] “Influence of steep seabed slopes on breaking waves for structure design,” Probabilistic Design Tools for Vertical Breakwaters — Hydrodynamic Aspects, Chapter 2.1, ed. Allsop, N. W. H. , MAST III — PROVERBS — Project. (Technische Universität Braunschweig, Braunschweig, Germany), pp. 1–28.
  • Baldock, T. E. , Holmes, P. , Bunker, S. & Van Weert, P. [1998] “Cross-shore hydrodynamics within an unsaturated surf zone,” Coast. Eng. 34, 173–196.
  • Battjes, J. A. & Janssen, J. P. F. M. [1978] “Energy loss and set-up due to breaking of random waves,” in Proc. 16th Int. Conf. Coastal Engineering, ASCE , pp. 569–587.
  • Collins, J. I. & Weir, W. [1969] “Probabilities of wave characteristics in the surf zone,” Tetra Technical Report, TC-149, Pasadena, California, USA.
  • Cox, T. & Kobayashi, N. [1997] “Kinematic undertow model with logarithmic boundary layer,” J. Waterw. Port Coast. Ocean Eng. 123(6), 354–360.
  • De Serio, F. L. Mossa, M. [2006] “Experimental study on the hydrodynamics of regular breaking waves,” Coast. Eng. 53, 99–113.
  • Dette, H. H , Peters, K. & Newe, J. [1998] “MAST III — SAFE Project: Data documentation, large wave flume experiments '96/97,” Report No. 825 and 830, Leichtweiss-Institute, Technical University Braunschweig.
  • Galvin, C. J. [1969] “Breaker travel and choice of design wave height,” J. Waterway Harb. Div. 95(2), 175–200.
  • Goda, Y. [1970] “A synthesis of breaker indices,” Trans. Jpn. Soc. Civil Eng. 2, 227–230.
  • Goda, Y. [1974] “Estimation of wave statistics from spectral information,” in Proc. Ocean Waves Measurement and Analysis Conf., ASCE , pp. 320–337.
  • Goda, Y. [2010] “Reanalysis of regular and random breaking wave statistics,” Coast. Eng. 52, 71–106.
  • Goda, Y. [2012] “Design wave height selection in intermediate-depth water,” Coast. Eng. 66, 3–7.
  • Goodknight, R. C. & Russel, T. L. [1963] “Investigation of the statistics of wave heights,” J. Waterway Harb. Div. 89(2), 29–55.
  • Gourlay, M. R. [1994]. “Wave transformation on a coral reef,” Coast. Eng. 23, 17–42.
  • Hansen, J. B. & Svendsen, I. A. [1979] Regular waves in shoaling water: Experimental data. Series paper No. 21, Institute of Hydrodynamics and Hydraulic Engineering, Technical University of Denmark.
  • Hemsen, J. B. & Svendsen, I. A. [1984] “A theoretical and experiment study of undertow,” in Proc. 19th Coastal Engineering Conf., ASCE , pp. 2246–2262.
  • Horikawa, K. L. Kuo, C. T. [1966] “A study of wave transformation inside the surf zone,” in Proc. 10th Coastal Engineering Conf., ASCE , pp. 217–233.
  • Hurue, M. [1990] “Two-dimensional distribution of undertow due to irregular waves,” Bachelor Thesis, Department of Civil Engineering, Yokohama National University, Japan.
  • Ijima, T. , Matsuo, T. & Koga, K. [1970] “Equilibrium range spectra in shoaling water,” in Proc. 12th Coastal Engineering Conf, ASCE , pp. 137–149.
  • Janssen, T. T. & Battjes, J. A. [2007] “A note on wave energy dissipation over steep beaches,” Coast. Eng. 54, 711–716.
  • Kajima, R. , Shimizu, T. , Maruyama, K. & Saito, S. [1983] “On-offshore sediment transport experiment by using large scale wave flume,” Collected data No. 1–8, Central Research Institute of Electric Power Industry, Japan (in Japanese).
  • Kamphuis, J. W. [1991] “Incipient wave breaking,” Coast. Eng. 15, 185–203.
  • Kamphuis, J. W. [2010] Introduction to Coastal Engineering and Management (World Scientific), p. 223.
  • Kraus, N. C. , Gingerich, K. J. & Rosati, J. D. [1989] “Duck85 surf zone sand transport experiment,” Technical Report CERC-89-5, WES, US Army Corps of Engineers.
  • Kraus, N. C. & Smith, J. M. [1994] “SUPERTANK laboratory data collection project,” Technical Report CERC-94-3, WES, US Army Corps of Engineers, Vols. 1 and 2.
  • Long, C. E. [1991] “Use of theoretical wave height distributions in directional seas,” Technical Report CERC-91-6, WES, US Army Corps of Engineers.
  • Madsen, O. S. [1976] “Wave climate of the continental margin: Elements of its mathematical description,” eds. Stanley, D. J. & Swift, D. J. P. , Marine Sediment Transport in Environmental Management (Wiley, New York), pp. 65–87.
  • McCowan, J. [1894] “On the highest waves of a permanent type,” Philos. Mag., Edinburgh 38, 351–358.
  • Miche, R. [1944] “Mouvements ondulatoires de la mers en profondeur constante on decroissante,” in Ann. des Ponts et Chaussees, 114e Annee, pp. 25–78, 131–164, 270–292, 369–406.
  • Nadaoka, K. , Kondoh, T. & Tanaka, N. [1982] “The structure of velocity field within the surf zone revealed by means of laser-Doppler anemometry,” Report of the Port and Harbor Research Institute 21(2), 50–102 (in Japanese).
  • Nagayama, S. [1983] “Study on the change of wave height and energy in the surf zone,” Bachelor Thesis, Department of Civil Engineering, Yokohama National University, Japan.
  • Nelson, R. C. [1987] “Design wave heights on very mild slopes — An experimental study,” Civil Eng. Trans. Institution of Engineers Australia, CE29, pp. 157–161.
  • Okayasu, A. , Shibayama, T. & Horikawa, K. [1988] “Vertical variation of undertow in the surf zone,” in Proc. 21st Coastal Engineering Conf, ASCE , pp. 478–491.
  • Ostendorf, D. W. & Madsen, O. S. [1979] “An analysis of longshore current and associated sediment transport in the surf zone,” Report No. 241, Department of Civil Engineering, Massachusetts Institute of Technology, USA.
  • Rattanapitikon, W. k. Shibayama, T. [2000] “Verification and modification of breaker height formulas,” Coast. Eng. J. 42, 389–406.
  • Roelvink, J. A. & Reniers, A. J. H. M. [1995] “LIP 11D delta flume experiments: A data set for profile model validation,” Report No. H 2130, Delft Hydraulics, The Netherlands.
  • Sato, S. , Fukuhama, M. & Horikawa, K. [1988] “Measurement of near-bottom velocities in random waves on a constant slope,” Coast. Eng. Jpn. 31, 219–229.
  • Sato, S. , Isayama, T. & Shibayama, T. [1989] “Long-wave component in near-bottom velocity under random waves on a gentle slope,” Coast. Eng. Jpn. 32, 149–159.
  • Seyama, A. & Kimura, A. [1988] “The measured properties of irregular wave breaking and wave height change after breaking on slope,” in Proc. 21st Coastal Engineering Conf., ASCE , pp. 419–432.
  • Smith, E. R. , Hesser, T. J. & Smith, J. M. [2012] “Two- and three-dimensional laboratory studies of wave breaking, dissipation, setup, and runup on reefs,” Report ERDC/CHL TR-12-21, Coastal and Hydraulics Laboratory, US Army Engineer Research and Development Center.
  • Smith, E. R. & Kraus, N. C. [1990] “Laboratory study on macro-features of wave breaking over bars and artificial reefs,” Technical Report CERC-90-12, WES, US Army Corps of Engineers.
  • Smith, J. M. & Seabergh, W. C. [2001] “Wave breaking on a current at an idealized inlet with an ebb shoal,” Report No. ERDC/CHL TR-01-7, Engineer Research and Development Center, US Army Corps of Engineers.
  • Stive, M. J. F. & Wind, H. G. [1986] “Cross-shore mean flow in the surf zone,” Coast. Eng. 10, 325–340.
  • Thornton, E. B. & Guza, R. T. [1983] “Transformation of wave height distribution,” J. Geophys. Res. 88(C10), 5925–5938.
  • Ting, F. C. K. [2001] “Laboratory study of wave and turbulence velocity in broad-banded irregular wave surf zone,” Coast. Eng. 43, 183–208.
  • Ting, F. C. K. [2002] “Laboratory study of wave and turbulence characteristics in narrow-banded irregular breaking waves,” Coast. Eng. 46, 291–313.
  • Ting, F. C. K. [2011] “Laboratory measurements of large-scale near-bed turbulent flow structures under spilling regular waves,” Coast. Eng. 58, 151–172.
  • Ting, F. C. K. [2013] “Laboratory measurements of large-scale near-bed turbulent flow structures under plunging regular waves,” Coast. Eng. 77, 120–139.
  • Weggel J. R. [1972] “Maximum breaker height,” J. Waterway Harb. Coast. Eng. Div. 98(4), 529–548.
  • Whitehouse, R. J. S. k. Sutherland, J. [2001] “COAST3D Data Report — 3D Experiment, Teign-mouth, UK,” HR Wallingford Report TR 119.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.