References
- M. B. KERMANI and L. M. SMITH (eds.): `CO2 corrosion control in oil and gas production — design considerations', EFC Publication No. 23; 1997, London, The Institute of Materials.
- M. B. KERMANI et al.: Proc. Conf. Corrosion '91, Cincinnati, OH, USA, March 1991, NACE, Paper 21.
- 'Guidelines on materials requirements for carbon and low alloy steels for H2 S-containing environments in oil and gas production', EFC Publication No. 16; 1995, London, The Institute of Materials.
- M. BONISand J.-L. CROLET: Corros. Sci., 1987, 27, 1059–1070.
- C. J. HOUGHTON and R. V. WESTERMARK: J. Pet. Technol., Jan. 1983, 239.
- G. G. HUNTOON and J. D. ALKIRE: 'Design and performance properties of oilfield fibreglass tubulars', SPE 19728, Society of Petroleum Engineers, San Antonio, TX, 1989.
- L. M. SMITH: 'Engineering with clad steel', NiDI Technical Series No. 10064, Nickel Development Institute, Birmingham, 1996.
- T. YOSHIDA, S. MATSUI, T. ATSUTA, S. TOMA, and H. HASEGAWA: Proc. Offshore Technology Conf., Houston, TX, USA, May1982, Paper 4200.
- J. A. COLWELL, C. J. MARTIN, and R. D. MACK: Corrosion, 1989, 45, (5), 429.
- Mater. Petform., 1990, 29, (2), 60–63.
- R. D. KANE, D. ABAYARATHNA, A. NAKAMURA, and K. MASAMURA: Proc. Conf. Corrosion '95, Houston, TX, USA, April1995, NACE, Paper 68.
- A. IKEDA et al.: Proc. Conf. Corrosion '83, Anaheim, CA, USA, April 1983, NACE, Paper 4.
- L. KLEIN et al.: Proc. Conf. Corrosion '90, Las Vegas, NV, USA, April 1990, NACE, Paper 52.
- B. D. CRAIG: 'Selection guidelines for corrosion resistant alloys in the oil and gas industry', NiDI Technical Series No. 10073, Nickel Development Institute, Birmingham, 1995.
- A. NAIRN: Proc. 4th Meeting of the EFC Working Party on Corrosion in the Oil and Gas Industry, Barcelona, Spain, July1993.
- W. J. SISAK: Proc. Conf. Corrosion '91, Cincinnati, OH, USA, March1991, NACE, Paper 12.
- M. UEDA et al.: Proc. Conf. Corrosion '92, Nashville, TN, USA, April—May 1992, NACE, Paper 55.
- S. HASHIZUME: Proc. Conf. Corrosion '92, Nashville, TN, USA, April—May1992, NACE, Paper 54.
- 'NKK material selection guide for OCTG', Fig. A6; 1992, Tokyo, NKK Corp.
- R. FRANCIS and G. BYRNE: Proc. Conf. Corrosion '94, Baltimore, MD, February—March 1994, NACE, Paper 64.
- T. GOOCH and R. GUNN: 'Alloy materials for sour environments — a critical review', Report TWI GSP 5607/1/92, TWI, Cambridge, 1992.
- M. BARTERI et al.: Proc. Conf. Corrosion '86, Houston, TX, USA, March 1986, NACE, Paper 157.
- R. FRANCIS: Proc. Conf. Duplex '94, Glasgow, UK, November1994, TWI, Keynote Paper KIV.
- L. M. SMITH and C. De WAARD: Ind. Corros., Dec. 1989—Jan. 1990, 14–18.
- J. KOLTS: Corrosion '86, Houston, TX, USA, March1986, NACE, Paper 323.
- B. D. CRAIG: Mater. Petform., 1991, 30, (12), 51–56.
- R GAVESON et al.: Proc. Conf. Corrosion '87, San Francisco, CA, USA, March1987, NACE, Paper 286.
- R. R BADRAK: Proc. Conf. Corrosion '92, Nashville, TN, USA, April—May1992, NACE, Paper 62.
- C. J. MARTIN: Proc. Conf. Corrosion '94, Baltimore, MD, USA, February—March1994, NACE, Paper 70.
- R. W. SCHUTZ: Proc. Conf. Corrosion '92, Nashville, TN, USA, April—May1992, NACE, Paper 51.
- S. KITAYAMA et al.: Proc. Conf. Corrosion '92, Nashville, TN, USA, April—May 1992, NACE, Paper 52.
- 'Corrosion resistant alloys for oil and gas production: guidance on general requirements and test methods for H25 service', EFC PublicationNo. 17; 1996, London, The Institute of Materials.
- B. D. CRAIG: Mater. Petform., 1986, 25, (6), 48.