References
- Elansezhian R., Ramamoorthy B. and Kesavan Nair P.: ‘Study on characterisation and influence of surfactants on adhesion and coating thickness of electroless Ni–P deposits’, Int. J. Microstruct. Mater. Prop., 2012, 7, (1), 77–93.
- Juan B.: ‘Life extension of electroless nickel solutions’, AES 68th Annual Technical Conference, Cincinnati, 1; 1984.
- Li C. L., Zhao H. X., Tsuru T., Zhou D. and Matsumura M.: ‘Recovery of spent electroless nickel plating bath by electrodialysis’, J. Membr. Sci., 1999, 157, (2), 241–249.
- Bolger P. T. and Szlag D. C.: ‘Investigation into the rejuvenation of spent electroless nickel baths by electrodialysis’, Environ. Sci. Technol., 2002, 36, (10), 2273–2278.
- Jappes J. T., Ramamoorthy B. and Kesavan Nair P.: ‘A study on the influence of process parameters on efficiency and crystallinity of electroless Ni–P deposits’, J. Mater. Process. Technol., 2005, 169, (2), 308–313.
- Mallory G. O. and Hajdu J. B.: ‘Electroless plating’ 207, 1991, Orlando, American Electroplaters and Surface Finishing Society.
- Riedel W.: ‘Electroless plating’ 261; 1991, Ohio, ASM International.
- Baudrand D. W.: ‘Electroless nickel plating’, in ‘ASM Handbook, Volume 5 – Surface Engineering’, 290; 1994, Material Park, OH, ASM International.
- Salvago G. and Cavallotti P. L.: ‘Characteristics of the chemical reduction of nickel alloys with hypo-phosphite’, Plating, 1972, 59, 665.
- Feldstein N. and Amodio P. R.: ‘Anionic inhibition in electroless plating’, J. Electrochem. Soc., 1970, 117, 1110.
- Parker K.: ‘The formulation of electroless nickel-phosphorus plating baths’, Plat. Surf. Finish., 1987, 74, (2), 60–65.
- Shravani D., Lakshmi P. K. and Balasubramaniam J.: ‘Preparation and optimisation of various parameters of enteric coated pellets using the Taguchi L9 orthogonal array design and their characterization’, Acta Pharm. Sin. B, 2011, 1, (1), 56–63.
- Farzaneh A., Ehteshamzadeh M., Ghorbani M. and Vazifeh Mehrabani J.: ‘Investigation and optimisation of SDS and key parameters effect on the nickel electroless coatings properties by Taguchi method’, J. Coat. Technol. Res., 2010, 7, (5), 547–555.
- Bellemare R.: ‘Proceeding Electroless Nickel Conference’; 1997, Cincinnati, Gardner Publications.
- Das S. K. and Sahoo P.: ‘Influence of process parameters on microhardness of electroless Ni-B coatings’, Adv. Mech. Eng., 2012, 4, 703168.
- Elansezhian R., Ramamoorthy B. and Kesavan Nair P.: ‘Effect of surfactants on the mechanical properties of electroless (Ni–P) coating’, Surf. Coat. Technol., 2008, 203, (5), 709–712.
- Yan M., Ying H. G. and Ma T. Y.: ‘Improved microhardness and wear resistance of the as-deposited electroless Ni–P coating’, Surf. Coat. Technol., 2008, 202, (24), 5909–5913.
- Mukherjee S. K. and Khanra G. P.: ‘Development of nickel aluminide-carbon fibre intermetallic composite by reaction sintering’, J. Mater. Sci. Lett., 1991, 10, (20), 1222–1224.