REFERENCES
- L. F. MONDOLFO: ‘Aluminium Alloys: Structure and properties’; 1976, London, Butterworths.
- J. R. DAVIES (ed.): ASM specialty handbook — Aluminium and aluminium alloys'; 1993, Materials Park, OH, ASM International.
- E. J. LAVERNIA, J. D. AYERS, and T. S. SRIVATSAN: int. Mater. Rev. , 1992, 37, 1–44.
- A. GREASLEY and H. Y. SHI: Powder Metall. , 1993, 36, 288–292.
- Z. ISHIJIMA, H. SHIKATA, H. URATA, and S. KAWASE: ‘Advances in powder metallurgy and particulate materials’, 14-3-14-14; 1996, Princeton, NJ, MPIF.
- J. R. PICKENS: J. Mater. Sci. , 1981, 16, 1437-1457.
- M. HULL: Powder Metall. , 1997, 40, 103.
- M. J. COUPER, M. NAUER, R. BAUMANN, and R. F. SINGER: in Proc. Int. Conf. ‘PM Aerospace Materials’, Luzern, Switzerland, Nov. 1987, Paper 28.
- A. D. JATKAR and R. R. SAWTELL: in Proc. Int. Conf. ‘PM Aerospace Materials’, Lausanne, Switzerland, Nov. 1991, Paper 15.
- P. S. GILMAN: in Proc. Int. Conf. ‘PM Aerospace Materials’, Lausanne, Switzerland, Nov. 1991, Paper 16.
- Met. Powder Rep., 1998, 53, (7/8), 12-15.
- G. B. SCHAFFER and s H. Roo: ‘Advances in powder metallurgy and particulate materials’, 14-27-14-39; 1996, Princeton, NJ, MPIF.
- W. J. ULLRICH: ‘Progress in powder metallurgy’, Vol. 42, 535–556; 1986, Princeton, NJ, MPIF.
- G. JANGG, H. DANNINGER, K. SCHR8DER, K. ABHARI, H. C. NEUBING, and J. SEYRKAMIVIER: Mater.wiss. Werkst. tech. , 1996,27, 179–189.
- W. J. HUPPMANN, H. KIRSCHSIEPER, W. HÄDE, and G. SCHLIEPER: in Proc. 7th Int. Light Metals Cong., Leoben/Vienna, June 1981, 236-237.
- R. N. LUMLEY and G. B. SCHAFFER: Scr. Mater. , 1996,35, 589–595.
- R. N. LUMLEY and G. B. SCHAFFER: SCr. Mater. , 1998, 39, 1089–1094.
- T. WATANABE and K. YAMADA: Mt. J. Powder Metall. , 1968, 4, (3), 37–47.
- H. DANNINGER, H. C. NEUBING, and J. GRADL: `PM98: world congress on powder metallurgy', 272-277; 1998, Shrewsbury, EPMA.
- R. N. LUMLEY, T. B. SERCOMBE, and G. B. SCHAFFER: Metall. Mater. Trans. , 1999, 30A, 457–463.
- I. A. SHIBLI and D. E. DAVIES: Powder Metall. , 1987, 30, 97–102.
- W. KEHL and H. FISCHMEISTER: Mater. Sci. Monographs, 1982, 14, 269–274.
- A. P. SAVITSKII, G. N. ROMANOV, and L. S. MARTSUNOVA: Proc. European Conf. on ‘Advances in structural PM component production’, Munich, Germany, October 1997, EPMA, 150-156.
- F. F. MA and B. L. DAVIES: Powder Metall. , 1982, 25, 209–215.
- H. C. NEUBING and G. JANGG: Met. Powder Rep. , 1987, 42, (5), 354–358.
- J. H. DUDAS and C. B. THOMPSON: ‘Modem developments in powder metallurgy’, (ed. H. H. Hausner), Vol. 5, 19–36; 1971, New York, NY, Plenum Press.
- M. MÜHLBURGER and P. PASCHEN: Z. Metallkd.,1993, 84, 346-350.
- E. M. DAVER, W. J. ULLRICH, and K. B. PATEL: Key Eng. Mater. , 1989, 29-31, 401–428.
- T. B. SERCOMBE and G. B. SCHAFFER: Mater. Sci. Eng. , 1999, 268A, 32–39.
- W. KEHL and H. F. FISCHMEISTER: Powder Metall. , 1980, 23, 113–119.
- J. M. MARTIN, H. DANNINGER, and F. CASTRO: `PM2000: world congress on powder metallurgy', Part 2, 1061-1064; 2000, Tokyo, Japan Society of Powder and Powder Metallurgy.
- G. B. SCHAFFER and S. H. HUG: Powder Metall. , 1999,42,219–226.
- G. B. SCHAFFER, S. H. HUO, J. DRENNAN, and G. J. AUCHTERLONIE Acta Mater. , 2001, 49, 2671–2678.