REFERENCES
- ‘Materials standards for metal injection moulded parts’, 12-13; 2000, Princeton, NJ, MPIF.
- M. BLÖMACHER, D. WEINAND, M. SCHWARZ, and E. LANGER: ‘Advances in powder metallurgy and particulate materials’, (ed. A. Lawley and A. Swanson), 5.73-5.89; 1993, Princeton, NJ, MPIF.
- H. MIURA, T. HONDA, K. F. HENS, and R. M. GERMAN: in ‘Powder injection moulding symposium’, (ed. P. Booker et al), 203-217; 1992, Princeton, NJ, MPIF.
- P. A. HAUCK, P. M. MACHMEIER, P. A. DEPOUTILOFF, P. B. LEMENS, and W. R. MOSSNER: ‘Advances in powder metallurgy and particulate materials’, (ed. L. F. Pease III and R. J. Sansoucy), 2.237-2.257; 1991, Princeton, NJ, MPIF.
- F. PETZOLDT, H. EIFERT, T. HART WIG, and G. VELTL: ‘Advances in powder metallurgy and particulate materials’, (ed. M. Phillips and J. Porter), 6.3-6.13; 1995, Princeton, NJ, MPIF.
- ‘Materials standards for PM structural parts’, 47; 2000, Princeton, NJ, MPIF.
- ‘Computer aided selection of iron powders’, 1995, Högands, Hoganfts AB.
- M. GAGNE and Y. TRUDEL: Met. Powder Rep. , 1992,47, (2), 36–41.
- M. KHALEGHI and R. HAYNES: Powder Metall. Int. , 1988, 20, (1), 9–12.
- K. S. HWANG and M. Y. HSIAO: Metall. Mater. Trans. B, 1996, 27B, 203–211.
- H. ZHANG and R. M. GERMAN: Int. J. Powder Metall. , 1991, 27, (3), 249–254.
- Y. HANATATE, K. MAJIMA, and H. MITANI: Trans. Jpn Inst. Met. , 1978, 19, 669–673.
- Y. HANATATE, K. MAJIMA, and H. MITANI: J. Jpn Inst. Met. , 1976, 40, (10), 1010–1015.
- K. LIPP, G. STRAFFELINI, and C. M. SONSINO: Powder Metall. Mt. , 1993, 25, (6), 261–266.
- J. A. LUND and A. M. LAWSON: Trans. Metall. Soc. AIME, 1966, 236, 581–582.
- E. HORNBOGEN and R. C. GLENN: Trans. Metall. Soc. AIME, 1960, 218, 1064–1070.
- C. T. HUANG and K. S. HWANG: Powder Metall. , 1996, 39, (2), 119–123.
- F. V. LENEL and K. S. HWANG: Powder Metall. Int. , 1980, 12, (2), 88–90.
- S. KOHARA and K. TATSUZAWA: J. Jpn Soc. Powder Powder Metall. , 1986, 33, 139–145.
- H. DANNINGER: Powder Metall. Int. , 1992, 24, (2), 73–79.
- H. DANNINGER: Powder Metall. Int. , 1992, 24, (3), 163–168.
- M. HAMIUDDIN: Powder Metall. Int. , 1983, 15, (3), 147–150.
- Y. L. HO and S. T. LIN: Metall. Mater. Trans. A, 1995, 26A, 133–142.
- M. A. PHILLIPS, E. L. STREICHER, MELVIN RENOWDEN, R. M. GERMAN, and J. M. FRIEDT: ‘Powder injection moulding symposium’, (ed. P. Booker et al), 203-217; 1992, Princeton, NJ, MPIF.
- G. CIZERON and P. LACOMBE: C. R. Acad. Bulg. Sci. , 1955, 241, 409–410.
- H. ZHANG, R. M. GERMAN, K. F. HENS, and D. LEE: Powder Metall. Int. , 1990, 22, (6), 15–18.
- S. MROWEC: ‘Defects and diffusion in solids, an introduction’, 400; 1974, New York, NY, Elsevier/North-Holland Inc.