REFERENCES
- D. E. CLARK and w H. SUTTON: Annu. Rev. Mater. Scl, 1996, 26, 299–331.
- R. F. SCHIFFMAN: Ceram. Trans. , 1995, 59, 7–17.
- J. D. KATZ: Annu. Rev. Mater. Scl, 1992, 22, 153–170.
- W. H. SUTTON: Mater. Res. Soc. Symp. Proc. , 1992, 269, 3–19.
- W. H. SUTTON: Ant Ceram. Soc. Bull, 1989, 68, (2), 376–386.
- D. K. AGRAWAL: Curr. Opin. Solid State Mater. Scl, 1998, 3 (5), 480–486.
- R. ROY, D. K. AGRAWAL, J. P. CHENG and M. MATHIS: Ceram. Trans. , 1997, 80, 3–26.
- D. K. AGRAWAL, Y. FANG, D. M. ROY and R. ROY: Mater. Res. Soc. Symp. Proc. , 1992, 269, 231–236.
- Y. FANG, D. K. AGRAWAL, D. M. ROY and R. ROY: J. Mater. Res. , 1992, 7, (2), 490–494.
- Y. FANG, D. K. AGRAWAL, D. M. ROY and R. ROY: Ceram. Trans. , 1993, 36, 397–407.
- Y. FANG, D. K. AGRAWAL, D. M. ROY and R. ROY: Ceram. Trans. , 1993, 36, 109–114.
- Y. FANG, D. K. AGRAWAL, D. M. ROY and R. ROY: Mater. Lett. , 1995, 23, 147–151.
- Y. FANG, R. ROY, D. K. AGRAWAL and D. M. ROY: Mater. Lett. , 1996, 28, 11–15.
- J. P. CHENG, D. K. AGRAWAL, S. KOMARNENI, M. MATHIS and R. ROY: Mater. Res. Innov. , 1997, 1, 44–52.
- T. GERDES and M. WILLERT-PORADA: Mater. Res. Soc. Symp. Proc. , 1996, 347, 531–537.
- T. GERDES, M. WILLERT-PORADA and K. RODIGER: ‘Materials processing of materials V’, 430, 45-50; 1996, Pittsburgh, PA, Materials Research Society.
- R. ROY, D. K. AGRAWAL, J. P. CHENG and S. GEDEVANISHVILI: Nature, 1999, 399, (17), 668–670.
- R. M. ANKLEKAR, K. BAUER, D. K. AGRAWAL and R. ROY: Proc. 2nd National Conf. on ‘Powder metallurgy with international participation’, Ankara, Turkey, September 1999, Turkish Powder Metallurgy Association, 287-294.
- M.-J. YANG and R. M. GERMAN: ‘Advances in powder metallurgy and particulate materials’, Vol. 1, No. 3, 207-219; 1999, Princeton, NJ, MPIF.
- R. M. ANKLEKAR, D. K. AGRAWAL and R. ROY: Powder Metall. , 2001, 44, (4), 355–362.
- R. ROY, D. K. AGRAWAL and J. P. CHENG: ‘Process for Sintering Powder Metal Components’, US Patent # 6,004,505 (1999).
- J. W. WALKIEWICZ, G. KAZONICH and S. L. MCGILL: Min. Metall. Process. , 1988, 5, 39–42.
- T. NISHITANI: ‘Method for sintering refractories and an apparatus therefore’, US Patent # 4,147,911 (1979)
- R. M. GERMAN: ‘Powder metallurgy of iron and steel’; 1998, New York, NY, Wiley.
- P. NASH, C. WEN, M. PHILIPS and E. LUMPKINS: ‘Advances in powder metallurgy and particulate materials’, Vol.1, No.4, 95; 1995, Princeton, NJ, MPIF.
- A. J. PAPWORTH, D. K. AGRAWAL and J. CHENG: `Microstructural and microcompositional analysis of WC/Co and Fe—Cu—C powder materials, prepared by microwave sintering method,' Proc. Inst. Phys. Conf. Ser. No. 168, Section 4, 199-202 (EMAG 2001); London, Institute of Physics.