References
- in ‘ASM handbook’, Vol. 7, ‘Powder metal technologies and applications/prepared under the direction of the ASM International Handbook Committee’, 376; 1998, Materials Park, OH, ASM.
- K. Ueda, T. Machida, M. Iwakiri and H. Fukagawa: ‘Effect of powder lubricants and compacting temperature on the higher density of iron-based green compacts’, Hitachi Powder Met. Techn. Report, 2002, 1, 29–38.
- Y. Ozaki, S. Unami and S. Uenosono: ‘Pre-mixed partially alloyed iron powder for worm compaction: KIP clean mix HW series’, Kawasaki steel technical report no. 47, December 2002.
- C. C. Degnan, P. H. Shipway and A. R. Kennedy: ‘Comparison of the green strength of warm compacted Astaloy CrM and Distaloy AE Densimix powder compacts’, Mater. Sci. Technol. , 2004, 20, 731
- in ‘ASM handbook’, Vol. 7, ‘Powder metal technologies and applications/prepared under the direction of the ASM International Handbook Committee’, 322; 1998, Materials Park, OH, ASM.
- H. Rutz, J. Khanuja and S. Kassam: ‘Single compaction to achieve high density in ferrous P/M materials in automotive applications’, Proc. PM2TEC '96 World Cong., Washington, DC, USA, June 1996, Metal Powder Industries Federation.
- W. Schatt and K. P. Wieters: ‘Powder metallurgy: processing and materials’, 50, 163; 1997, Shrewsbury, EPMA Publications.
- U. Shigeru, O. Yukiko and U. Satoshi: US patent no. 6355208,2002.
- S. S. M. Nora, M. M. Rahmana, F. Tarlochana, B. Shahidaa and A. K. Ariffinb: ‘The effect of lubrication in reducing net friction in warm powder compaction process’, J. Mater. Process. Technol. , 2008, 207, 118–124.
- in ‘ASM handbook’, Vol. 7, ‘Powder metal technologies and applications/prepared under the direction of the ASM International Handbook Committee’, 881; 1998, Materials Park, OH, ASM.
- H. Yu, S. Liu, Q. J. Wang and Y. W. Chung: ‘Influence of temperature-dependent yield strength on thermomechanical asper-ity contacts’, Tribol. Lett. , 2004, 17, (2), 155–164.
- R. P. Baron, F. E. Wawner and J. A. Wert: ‘Relationship between fractional porosity and tensile strength for high-porosity sintered ferrous powder compacts’, Ser. Mater. , 1998, 39, (3), 269–275.