Advanced search
Publication Cover
Powder Metallurgy Volume 54, 2011 - Issue 3
Journal homepage
172
Views
9
CrossRef citations to date
0
Altmetric
Original Article

On development of hypoeutectic aluminium–silicon powder metallurgy alloy

W G MosherMaterials Engineering Department of Process Engineering and Applied Science, Dalhousie University, 1360 Barrington St., Halifax, Nova Scotia, Canada
,
G J KipourosMaterials Engineering Department of Process Engineering and Applied Science, Dalhousie University, 1360 Barrington St., Halifax, Nova Scotia, Canada
,
W F CaleyMaterials Engineering Department of Process Engineering and Applied Science, Dalhousie University, 1360 Barrington St., Halifax, Nova Scotia, Canada
,
I W DonaldsonNorth American and Materials Engineering, GKN Sinter Metals LLC, 3300 University Drive, Auburns Hills, MI48326, USA
&
D P BishopMaterials Engineering Department of Process Engineering and Applied Science, Dalhousie University, 1360 Barrington St., Halifax, Nova Scotia, CanadaCorrespondence[email protected]
Pages 432-439 | Received 27 Jan 2010, Accepted 17 May 2010, Published online: 12 Nov 2013

References

  • German MR: ‘Powder metallurgy & particulate materials processing’; 2005, Princeton, NJ, Metal Powder Industries Federation.
  • Pease LF, West WG: ‘Fundamentals of powder metallurgy’; 2002, Princeton, NJ, Metal Powder Industries Federation.
  • Smith FW: ‘Structure and properties of engineering alloys’, 2nd edn; 1993, New York, McGraw-Hill, Inc.
  • Polmear IJ: ‘Light alloys: from traditional alloys to nanocrystals’, 4th edn; 2006, Oxford, Elsevier/Butterworth-Heinemann.
  • Kuroishi N: ‘High strength, high wear resistance aluminium–silicon PM alloys’, Met. Powder Rep., 1985, 40, (11), 642.
  • Perrot R: ‘Engine cylinder liners in high silicon aluminum alloy produced by powder metallurgy’, Revue L'aluminium, 1979, (482), 129.
  • Yilmaz M: ‘Production of hypereutectic Al-Si alloys by P/M route’, Mater. Sci. Forum, 1996, 217, (3), 1853.
  • MPIF: ‘Standard test methods for powders and powder metallurgy products’, 2008, Princeton, NJ, Metal Powder Industries Federation.
  • Heard DW, Donaldson IW, Bishop DP: ‘Metallurgical assessment of a hypereutectic aluminium–silicon P/M alloy’, J. Mater. Process. Technol., 2009, 209, 5902.
  • Bishop DP, Hofmann B, Couchman KR, “Properties and Attributes of Commercially Availiable AC2014-Type Aluminium P/M Alloys”, Advances in Powder Metallurgy and Particulate Materials, ed by H. Ferguson and DOI Whychell, MPIF, 1, Part 12, (2000), 87–100.
  • Hennessey C, Caley WF, Kipouros GJ, Bishop DP: ‘Development of a PM aluminum alloy: effect of post-sinter cooling conditions’, Int. J. Powder Metall., 2006, 42, (6), 39.
  • Baker H, ed (ed.): ‘Alloy phase diagrams’; 1992, Materials Park, OH, ASM International.
  • Villars P, Prince A, Okamoto H: ‘Handbook of ternary alloy phase diagrams’; 1995, Materials Park, OH, ASM International.
  • Massalski TB, Okamoto H, ASM International (eds.): ‘Binary alloy phase diagrams’, 2nd edn; 1990, Materials Park, OH, ASM International.
  • Starink MJ: ‘Analysis of aluminium based alloys by calorimetry: quantitative analysis of reactions and reaction kinetics’, Int. Mater. Rev., 2004, 49, (3), 191.
  • Abis S: ‘Study of ageing in an AlCuMgZn foundry alloy’, Mater. Sci. Eng. A, 1996, A214, (1), 153.
  • Heard DW: ‘Methods to improve density and mechanical properties of a commercial hypereutectic aluminum–silicon powder metallurgy alloy’, Master's dissertation, Dalhousie University, Halifax, Canada, 2008.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.