References
- ‘Materials standards for PM structural parts’, Standard 35, MPIF, Princeton, NJ, 2009 edition.
- King P, et al..: ‘Lower molybdenum steels for high performance powder metallurgy applications’, in ‘Advances in powder metallurgy & particulate materials’, (compiled by W. Gasbarre, and J. von Arx), Part 7, 81–94; 2006, Princeton, NJ, MPIF.
- Lindsley B, Rutz H: ‘Effect of molybdenum content in PM steels’, in ‘Advances in powder metallurgy & particulate materials’, (compiled by R. Lawcock et al.), Part 7, 26; 2008, Princeton, NJ, MPIF.
- Lindsley B, ‘High performance manganese containing PM steels’, in ‘Advances in powder metallurgy & particulate materials’, (compiled by R. Lawcock et al.), Part 7, 17–25; 2008, Princeton, NJ, MPIF.
- Lindsley B, James WB: ‘PM steels that contain Mn’, in ‘Advances in powder metallurgy & particulate materials, (compiled by M. Bulger and B. Stebick), Part 10, 36–49; 2010, Princeton, NJ, MPIF.
- Lindsley B, et al..: ‘Mn-containing steels’, in ‘Advances in powder metallurgy & particulate materials’; 2011, Princeton, NJ, MPIF.
- ‘Standard test methods for metal powders and powder metallurgy products’, MPIF, Princeton, NJ, 2010.
- ‘Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials’, ASTM E466–07, ASTM, West Conchohoken, PA, 2007, p. 583–587.
- Chawla N, et al..: ‘Effect of copper and nickel alloying additions on the tensile and fatigue behavior of sintered steels’, in ‘Advances in powder metallurgy & particulate materials’, Part 5, 104; 2002, Princeton, NJ, MPIF.
- Zafari A, Beiss P, Broeckmann C: ‘Fatigue behaviour of Fe–Cu–C sintered steels as a function of stress concentration and alloying contents’, Proc. PM2010 World Congress, 231–236; 2010, Shrewsbury, MPIF.
- James WB, Lindsley B, Rutz HG, Narasimhan KS: ‘Lean hybrid low-alloy PM molybdenum steels’, Proc. Euro PM2009, Vol. 1, 23–28; 2009, Shrewsbury, EPMA.