References
- D. H. KIRKWOOD: Int. Mater. Rev., 1994, 39, 173.
- M. C. FLEMINGS: MetalL Trans. A, 1991, 22A, 957.
- P. A. JOLY and R. MEHRABIAN: J. Mater. Sci., 1976, 11, 1393.
- D. B. SPENCER, R. MEHRABIAN, and M. C. FLEMINGS: Metall. Trans., 1972, 3, 1925.
- M. SUERY, C. L. MARTIN, and L. SALVO: Proc. 4th Int. Conf. on ‘Semisolid processing of alloys and composites’, (ed. D. H. Kirkwood and P. Kapranos), The University of Sheffield, 1996, 21 — 29.
- H. LEHUY, F. MASSOUNAVE, and J. BLAIN: J. Mater. Sci., 1985, 20, 105.
- N. WANG, G. SHU, and H. YANG: Mater. Trans., JIM, 1990, 31, 715.
- T. Z. KATTAMIS and T. J. PICCONE: Mater. Sci. Eng. A, 1991, A131, 265.
- Y. ITO, M. C. FLEMINGS, and J. A. CORNIE: in ‘Nature and properties of semisolid materials’, (ed. J. A. Sekhar and J. A. Dantzig), 3-17; 1991, Warrendale, PA, TMS.
- T. TAHA N. EL. MAHALLAWY, and A. M. ASAR: J. Mater. Sci., 1988, 23, 1379.
- M. C. FLEMINGS and J. A. CORNIE: Proc. 2nd Int. Conf. on ‘Semisolid processing of alloys and composites’, (ed. S. B. Brown and M. C. Flemings), Cambridge, MA, USA, June 1992, 202-210; Warrendale, PA, TMS.
- R. A. MCLELLAND, N. G. ANDERSON, H. A. ATKINSON, and D. H. KIRKWOOD: Proc. 2nd Int. Conf. on ‘Semisolid processing of alloys and composites’, (ed. S. B. Brown and M. C. Flemings), Cambridge, MA, USA, June 1992, 290-295; Warrendale, PA, TMS.
- L. S. TURNG and K. K. WANG: J. Mater. Sci., 1991, 26, 12173.
- M. HIRAI, K. TAKEBAYASHI, Y. YOSHIKAWA, and R. YAMAGUCHI: ISIJ Int, 1993, 33, 405.
- L. MARTIN, P. KUMAR, and S. BROWN: Acta MetalL Mater., 1994, 42, 3603.
- M. MADA and F. AJERSCH: Mater. ScL Eng. A, 1996, A212, 157.
- M. MADA and F. AJERSCH: Mater. Sci. Eng. A, 1996, A212, 171.
- M. MODIGELL, J. PETERA, and J. KOKE: in Proc. 5th Int. Conf. on ‘Semisolid processing of alloys and composites’, ed. A. K. Bhasin et al., Colorado, USA, June 1998, Colorado School of Mines, 317–326.
- M. MODIGELL and J. KOKE: Mech. of Time-Dependent Mater., 1999, 3, 15–30.
- J. QUAAK, L. KATGERMAN, and W. H. KOOL: Proc. 4th Int. Conf. on ‘Semisolid processing of alloys and composites’, (ed. D. H. Kirkwood and P. Kapranos), Sheffield, UK, June 1996, 35-39; 1996, The University of Sheffield.
- P. KUMAR, C. L. MARTIN, and S. BROWN: Acta MetalL Mater., 1994, 42, 3595.
- M. M. CROSS: J. Colloid Sci., 1965, 20, 417–437.
- C.-H. CHENG: Int. J. Cosmetic Sci., 1987, 9, 151–191.
- N. ALEXANDROU, G. R. BURGOS, and V. M. ENTOV: Proc. 6th Int. Conf. on ‘Semisolid processing of alloys and composites’, (ed. G. L. Chiarmetta and M. Rosso), Turin, Italy, September 2000, Politecnico di Torino, 553–558.
- H. KIRKWOOD, P. J. WARD, M. BARKHUDAROV, S. B. CHIN, H. V. ATKINSON, and T. Y. LIU: Proc. 6th Int. Conf. OR ‘Semisolid processing of alloys and composites’, (ed. G. L. Chiarmetta and M. Rosso), Turin, Italy, September 2000, 545–551.
- K. SIGWORTH: Can. MetalL Q., 1996, 35, 101.
- M. SUERY and A. ZAVALIANGOS: Proc. 6th Int. Conf. on ‘Semisolid processing of alloys and composites’, (ed. G. L. Chiarmetta and M. Rosso), Turin, Italy, September 2000, 129–135.
- N. ALEXANDROU, G. R. BURGOS, and V. M. ENTOV: Proc. 6th Int. Conf. on ‘Semisolid processing of alloys and composites’, (ed. G. L. Chiarmetta and M. Rosso), Turin, Italy, September 2000, 161–167.
- P. G. J. VAN DONGEN and M. H. ERNST: J. Stat. Phys., 1984, 37, 301.
- J. Y. CHEN and Z. Q. HUANG: Biophys. Chem., 1996, 58, 273.
- T. MURATA and T. W. SECOMB: Biorhelogy, 1988, 25, 113.
- S. G. MASON and W. BARTOK: in `Rheology of disperse systems', (ed. C. C. Mill); 1957, London, Pergamon.
- A. BARNES, J. F. HUTTON, and K. WALTERS: ‘An introduction to rheology’; 1989, Amsterdam, Elsevier.
- P. ADLER, A. NADIM, and H. BRENNER: in ‘Advances in chemical engineering’, (ed. J. Wei), Vol. 15, 1-67; 1989, New York, Academic Press.
- A. EINSTEIN: Ann. Phys. (Leipzig), 1906, 19, 289.
- D. QUEMADA: J. Mech., Theor. AppL, 1985, 267.
- C. BIUNKMAN: J. Chem. Phys., 1952, 20, 571.
- R. ROSCOE: Br. J. AppL Phys., 1952, 3, 267.
- D. C.-H. CHENG and F. EVANS: Br. J. AppL Phys., 1965, 16, 1599.
- R. S. QIN and Z. FAN: Mater. Sci. Tech., 2001, 17, 1149–1152.