Metallurgy and processing of ultralow carbon bake hardening steels

References

• `Galvanisability of high strength steels in lightweight auto-motive development of consensus target properties', Report ZCO — 1 —1, International Lead Zinc Research Organization, Research Triangle Park, NC, USA, April 1996.
   Google Scholar
• B. ENGL and T. GERBER: Steel Res., 1996, 67, 430–437.
   Google Scholar
• N. mizur Proc. Conf. on ‘Modern LC and ULC sheet steels for cold forming — processing and properties’, (ed. W. Bleck), 169-178; 1998, Aachen, Verlag Mainz.
   Google Scholar
• T. MORIMOTO and S. KATO: JSAE Rev., 1982, 74.
   Google Scholar
• M. F. SHI, J. A. BRINDZA, P. F. MICHEL, P. BUCKLIN, P. J. BELANGER, and J. M. PRENCIPE, JR: SAE Technical Paper 970158, Society of Automotive Engineers, Warrendale, PA, USA, 1997.
   Google Scholar
• N. E. HEATH: in ‘Galvanised steel sheet forum—automotive’, 1–5; 2000, London, IoM Communications.
   Google Scholar
• ‘Glossary —coatings for automotive sheet steels’, AISI, Washington, DC, USA (www.steel.org ).
   Google Scholar
• F. E. GOODWIN, R. VENKATARAMAN, and T. C. SIMPSON: in ‘Galvanised steel sheet forum—automotive’, 47–56; 2000, London, IoM Communications.
   Google Scholar
• M. SASABE: Proc. 143 —144th Nishiyama Memorial Seminar, 19; 1992, Tokyo, Iron and Steel Institute of Japan.
   Google Scholar
• W. B. HUTCHINSON, K.-I. NILSSON, and J. HIRSCH: in ‘Metallurgy of vacuum degassed products’, 109 — 126; 1990, Warrendale, PA, TMS.
   Google Scholar
• D. K. MATLOCK, B. J. ALLAN, and J. G. SPEER: Proc. Conf. on ‘Modern LC and ULC sheet steels for cold forming — processing and properties’, (ed. W. Bleck), 265-276; 1998, Aachen, Verlag Mainz.
   Google Scholar
• N. MIZUI, A. OKAMOTO, and T. TANIOKU: Proc. LTV/SMI Technology Exchange Meeting, 1990, LTV Steel/Sumitomo Metal Industries.
   Google Scholar
• A. H. COTTRELL and B. A. BILBY: Proc. Phys. Soc., 1949, A62, 49— 62.
   Google Scholar
• J. D. BAIRD: Iron Steel, 1963, 36, 186–192.
   Google Scholar
• J. D. BAIRD: Iron Steel, 1963, 36, 326–334.
   Google Scholar
• J. D. BAIRD: Iron Steel, 1963, 36, 368–374.
   Google Scholar
• J. D. BAIRD: Iron Steel, 1963, 36, 400–405.
   Google Scholar
• R. BULLOUGH and R. C. NEWMAN: Proc. R Soc., 1959, A249, 427.
   Google Scholar
• M. NACKEN and W. HELLER: Arch. Eisenhiatenwes., 1960, 31, 103.
   Google Scholar
• D. V. WILSON and B. RUSSELL: Acta. Metall., 1959, 7, 628.
   Google Scholar
• D. V. WILSON and B. RUSSELL: Acta. Metall., 1960, 8, 36.
   Google Scholar
• D. V. WILSON and B. RUSSELL: Acta. Metall., 1960, 8, 468.
   Google Scholar
• J. L. SNOEK: Physica, 1939, 6, 591.
   Google Scholar
• P. ELSEN and H. P. HOUGARDY: Steel Res., 1993, 64, 431.
   Google Scholar
• A. V. SNICK, K. LIPS, S. VANDEPUTTE, B. C. DE COOMAN, and J. DILEWUNS: Proc. Conf. on ‘Modern LC and ULC sheet steels for cold forming—processing and properties’, (ed. W. Bleck), Vol. 2, 413; 1998, Aachen, Verlag Mainz.
   Google Scholar
• E. KOZESCHNIK and B. BUCHMAYR: Steel Res., 1997, 68, 224.
   Google Scholar
• H. ABE: Scand J. Metad, 1984, 13, 226–239.
   Google Scholar
• K. R. SANTANU: Metad Trans. A, 1991, 22A, 35–43.
   Google Scholar
• W. C. LESLIE and G. C. RAUCH: Metall. Trans A, 1978, 9A, 343 — 349.
   Google Scholar
• M. G. H. WELLS and J. F. BUTLER: Trans. ASM, 1966, 59, 427 — 438.
   Google Scholar
• R. W. K. HONEYCOMBE and H. K. D. H BHADESHIA: ‘Steels: microstructure and properties’, 2nd edn, 8-9; 1995, London, Edward Arnold.
   Google Scholar
• J. M RUBIANES and P. znarEa: Rev. Metad Cah. Int. Tech., 1996, 99–109.
   Google Scholar
• A. OKAMOTO, K. TAKECHI, and M. TAKAGI: Sumitomo Search, 1989, (39), 183–194.
   Google Scholar
• M. S. RASHID: Metad Trans. AIME, 1949, 7, 498.
   Google Scholar
• W. C. LESLIE: ‘The physical metallurgy of steels’, 79; 1981, New York, McGraw-Hill.
   Google Scholar
• S. HANAI, N. TAKEMOTO, Y. TOKUNAGA, and Y. MIZUYAMA: Trans ISIJ, 1984, 24, 17–23.
   Web of Science ®Google Scholar
• W. BLECK: Proc. IDDRG Working Group Meeting, Haugesund, Norway, May 1987, International Deep Drawing Research Group, 2–15.
   Google Scholar
• M. KINOSHITA and A. NISHIMOTO: Trans ISIJ, 1988, 28, B66.
   Google Scholar
• P. MEISSEN and V. LEROY: Steel Res., 1989, 60, (7), 320–328.
   Google Scholar
• K. SAKATA, S. SATOH, T. KATO, and O. HASHIMOTO: in ‘Physical metallurgy of IF steels’, 279–288; 1994, Tokyo, Iron and Steel Institute of Japan.
   Google Scholar
• T. OBARA, K. SAKATA, M. NISHIDA, and T. IRIE: Kawasaki Steel Tech. Rep., 1985, (12), 25–35.
   Google Scholar
• R. PRADHAN: in ‘Metallurgy of vacuum degassed steel products’, 309–325; 1990, Warrendale, PA, TMS.
   Google Scholar
• C.-S. LEE and B. K. ZUIDEMA: in ‘High strength steels for the automotive industry’, 103–110; 1994, Warrendale, PA, ISS.
   Google Scholar
• G. TITHER, C. I. GARCIA, M. HUA, and A. J. DEARDO: in ‘Physical metallurgy of IF steels’, 293; 1994, Tokyo, Iron and Steel Institute of Japan.
   Google Scholar
• T. TANIOKU, Y. HOBAH, A. OKAMOTO, and N. MIZUI: SAE Technical Paper 910293, Society of Automotive Engineers, Warrendale, PA, USA, 1991.
   Google Scholar
• N. KOJIMA, N. MIZUI, and T. TANIOKU: Sumitomo Search, 1993, 45, (5), 12–19.
   Google Scholar
• K. TSUNOYAMA, K. SAKATA, T. OBARA, S. SATOH, K. HASIGUSI, and T. nuE: in ‘Hot and cold rolled sheet steels’, 155–164; 1998, Warrendale, PA, TMS.
   Google Scholar
• K. KAWASAKI, T. SENUMA, and S. SANAGI: in ‘Processing, microstructure and properties of micro alloyed and other modern HSLA steels’, 137–144; 1991, Warrendale, PA, ISS.
   Google Scholar
• M. KITAMURA, I. TSUKATANI, and T. INOUE: ISIJ Int., 1994, 34, (1), 115–122.
   Google Scholar
• H. TAKECHI: in `Microalloying 1995', 71 —80; 1995, Warrendale, PA, ISS.
   Google Scholar
• M. KINO, M. YAMADA, Y. TOKUNAGA, and T. TSUCHIYA: in ‘Metallurgy of vacuum degassed products’, 197–211; 1990, Warrendale, PA, TMS.
   Google Scholar
• S. OKADA: Curr. Adv. Mater. Process., 1989, 2, 1726.
   Google Scholar
• T. HUE, S. SATOH, A. YASUDA, and O. HASHIMOTO: in ‘Metal-lurgy of continuously annealed sheet steel’, 155–171; 1982, Warrendale, PA, TMS.
   Google Scholar
• K. TSUNOYAMA, S. SATOH, Y. YAMASAKI, and H. ABE: in ‘Metallurgy of vacuum degassed products’, 127–141; 1990, Warrendale, PA, TMS.
   Google Scholar
• Y. TOKUNAGA and H. KATO: in ‘Metallurgy of vacuum degassed products’, 91–108; 1990, Warrendale, PA, TMS.
   Google Scholar
• B. ENGL and T. GERBER: ISS MWSP Conf. Proc., 1998, 35, 3–15.
   Google Scholar
• K. A. TAYLOR and J. G. SPEER: ISS MWSP Conf Proc., 1998, 35, 49 — 61.
   Google Scholar
• British Steel Strip Products, internal publication .
   Google Scholar
• N. OHASHI, T. IRIE, S. SATOH, and o. HASHIMOTO: SAE Technical Paper 810027, Society of Automotive Engineers, Warrendale, PA, USA, 1981.
   Google Scholar
• K. LIPS, X. YANG, and K. moLs: Steel Res., 1996, 67, (9), 357 — 363.
   Google Scholar
• H. TANAKA, Y. OGURA, K. YOSHIOKA, T. HIROSE, H. YAMADA, and M. SAKO: NKK Tech. Rep., 1987, (48), 21–28.
   Google Scholar
• E. HOGGAN and G. M. SUNG: ISS MWSP Conf Proc., 1998, 35, 17— 29.
   Google Scholar
• Y.-S. HWANG, 11.-C. CHEN, and T.-S. CHOU: in ‘High strength steels for the automotive industry’, 187 — 193; 1994, Warrendale, PA, ISS.
   Google Scholar
• T. NISHIOZAWA: in `Thermec— 88', 39-48; 1988, Tokyo, Iron and Steel Institute of Japan.
   Google Scholar
• A. VAN SNICK, D. VANDERSCHUREN, S. VANDEPUTTE, and J. DILEWIJNS: ISS MWSP Conf Proc., 1998, 35, 225–232.
   Google Scholar
• Y. TOKUNAGA and M. YAMADA: Method for the production of cold rolled steel sheet having super deep drawability', US Patent 4,504,326, 1985.
   Google Scholar
• A. ITAMI, K. USHIODA, N. KIMURA, H. ASANO, Y. KIMURA, and K. KOYAMA: Nippon Steel Tech. Rep., Jan. 1995, (64), 26–32.
   Google Scholar
• D. O. WILSHYNSKY, D. K. MATLOCK, and G. KRAUSS: in ‘Metallurgy of vacuum degassed products’, 247 — 261; 1990, Warrendale, PA, TMS.
   Google Scholar
• S. SATOH, T. IRIE, and O. HASHIMOTO: Tetsu-to-liagane (J. Iron Steel Inst. Jpn), 1983, 68, 1362.
   Google Scholar
• J. R. LOW and M. GENSAMER: Trans. AIME, 1944, 158, 207 — 249.
   Google Scholar
• W. BLECK, R. BODE, and W. MUSCHENBORN: SAE Technical Paper 930025, Society of Automotive Engineers, Warrendale, PA, USA, 1993.
   Google Scholar