REFERENCES
- M. S. Loveday, G. J. Mahon, B. Roebuck, A. J. Lacey, E. J. Palmiere, C. M. Sellars and M. R. van der Winden: ‘Measurement of flow stress in hot plane strain compression tests’, Mater. High Temp., 2006, 23, (2), 85–118.
- M. S. Mirza and C. M. Sellars: 'Modelling the hot plane strain compression test. Part 1 — effect of specimen geometry, strain rate, and friction on deformation', Mater. Set Technol., 2001, 17, (9), 1133–1141.
- M. S. Mirza and C. M. Sellars: ‘Modelling the hot plane strain compression test. Part 2 — effect of friction and specimen geometry on spread’, Mater. Sci. Technol., 2001, 17, (9), 1142–1148.
- B. Kowalski, A. J. Lacey and C. M. Sellars: ‘Correction of plane strain compression data for the effects of inhomo-geneous deformation’, Mater. Set Technol, 2003, 19, (11), 1564–1570.
- B. Roebuck, K. P. Mingard, M. Brooks, E. J. Palmiere, B. P. Wynne, M. J. Thomas, M. Bryant and W. J. Evans: ‘Good practice guide for quantifying microstructural heterogeneity in hot com-pression testpieces’, Measurement good practice guide no. 106, National Physical Laboratory, Department of Trade and Industry, Teddington, UK, May 2008.
- F. J. Humphreys: ‘Quantitative metallography by electron back-scattered diffraction’, J. Microsc., 1999, 195, 170–185.
- F. J. Humphreys: ‘Review — grain and subgrain characterisation by electron backscatter diffraction’, J. Mater. Sci, 2001, 36, (16), 3833–3854.
- K. P. Mingard, B. Roebuck, E. G. Bennett, M. Thomas, B. P. Wynne and E. J. Palmiere: ‘Grain size measurement by EBSD in complex hot deformed metal alloy microstructures’, J. Microsc., 2007, 227, (3), 298–308.
- M. S. Mirza and C. M. Sellars: ‘Modelling hot plane strain compression test. Part 3 — effect of asymmetric conditions’, Mater. Sci. Technol., 2007, 23, (5), 567–576.
- M. C. Mataya, E. R. Nilsson, E. L. Brown and G. Krauss: ‘Hot working and recrystallization of As-cast 316L’, Metall. Mater. Trans. A, 2003, 34A, (8), 1683–1703.
- W. Roberts, H. Boden and B. Ahlblom: ‘Dynamic recrystallization kinetics’, Met. Sci, 1979, 13, (3), 195–205.
- S. Funahashi: ‘The effects of friction and lubrication on multipass hot deformation’, MPhill thesis, The University of Sheffield, Sheffield, UK, 2009.
- K. P. Mingard, B. Roebuck, E. G. Bennett, M. G. Gee, H. Nordenstrom, G. Sweetman and P. Chan: ‘Comparison of EBSD and conventional methods of grain size measurement of hard-metals’, Int. J. Refract. Met. Hard Mater., 2009, 27, (2), 213–223.
- E. E. Underwood: ‘Quantitative stereology’, 284; 1970, Reading, MA; London, Addison-Wesley.
- J. H. Han and D. Y. Kim: ‘Analysis of the proportionality constant correlating the mean intercept length to the average grain-size’, Acta Metall Mater., 1995, 43, (8), 3185–3188.
- S. L. A. Valcke, G. M. Pennock, M. R. Drury and J. H. P. D. Bresser: ‘Electron backscattered diffraction as a tool to quantify subgrains in deformed calcite’, J. Microsc., 2006, 224, (3), 264–276.
- R. T. Dehoff and F. N. Rhines: ‘Quantitative microscopy’, 432; 1968, New York; London, McGraw-Hill.
- B. Roebuck, M. Stewart, R. Morrell, M. Gee and G. Plint: ‘Mapping hardness using automated depth sensing process’, Surf Eng., 2001, 17, (6), 447–449.
- J. H. Beynon and C. M. Sellars: ‘Strain distribution patterns during plane strain compression’, J. Test. Eval, 1985, 13, (1), 28–38.