Fabrication–microstructure–performance relationships of reversible solid oxide fuel cell electrodes–review

References

• Stern N: ‘Stern review on the economics of climate change’, Report, 1st edn, HM Treasury, London, UK, 2006.
   Google Scholar
• Ro ST, Sohn JL: ‘Some issues on performance analysis of fuel cells in thermodynamic point of view’, J. Power Sources, Feb. 2007, 167, 295–301.
   Web of Science ®Google Scholar
• Goettler R: ‘Review of the Rolls-Royce SOFC technology and SECA program’, Proc. 10th Annual Solid State Energy Conversion (SECA) Workshop, Pittsburgh, PA, USA, July2009, Rolls-Royce Fuel Cell Systems (US) Inc., US DOE.
   Google Scholar
• Vora SD: ‘SECA program review’, Proc. 10th Annual Solid State Energy Conversion (SECA) Workshop, Pittsburgh, PA, USA, July2009, Siemens, US DOE.
   Google Scholar
• Jiang SP, Zhang J, Foger K: ‘Chemical interactions between 3 mol lanthanum manganite’, J. Eur. Ceram. Soc., Nov. 2003, 23, 1865–1873.
   Web of Science ®Google Scholar
• Jiang SP: ‘Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review’, J. Mater. Sci., Aug. 2008, 43, 6799–6833.
   Web of Science ®Google Scholar
• Sun C, Stimming U: ‘Recent anode advances in solid oxide fuel cells’, J. Power Sources, Jun. 2007, 171, 247–260.
   Web of Science ®Google Scholar
• Bastidas DM, Tao S, Irvine JTS: ‘A symmetrical solid oxide fuel cell demonstrating redox stable perovskite electrodes’, J. Mater. Chem, Feb. 2006, 16, 1603–1605.
   Web of Science ®Google Scholar
• Kim JS, Pyun SI: ‘Kinetics of oxygen reduction at composite electrodes with controlled three-phase boundaries by patterning YSZ column’, Electrochim. Acta, Aug. 2009, 54, 952–960.
   Web of Science ®Google Scholar
• Jorgensen MJ, Mogensen M: ‘Impedance of solid oxide fuel cell LSM/YSZ composite cathodes’, J. Electrochem. Soc., Jan. 2001, 148, (5), A433–A442.
   Web of Science ®Google Scholar
• Yamaguchi T, Shimizu S, Suzuki T, Fujishiro Y, Awano M: ‘Effects of anode microstructure on the performances of cathode-supported micro-SOFCs’, Electrochem. Solid-State Lett., Aug. 2009, 12, (11), B151–B153.
   Google Scholar
• Clemmer RMC, Corbin SF: ‘The influence of pore and Ni morphology on the electrical conductivity of porous Ni/YSZ composite anodes for use in solid oxide fuel cell applications’, Solid State Ion., Feb. 2009, 180, 721–730.
   Web of Science ®Google Scholar
• Jiang SP: ‘A comparative study of fabrication and performance of NiO 3 mol.-%Y2O3–ZrO2 and NiO 8 mol.-%Y2O3–ZrO2 cermet electrodes’, J. Electrochem. Soc., May 2003, 150, (11), E548–E559.
   Web of Science ®Google Scholar
• Chen D, Lin Z, Zhu H, Lee RJ: ‘Percolation theory to predict effective properties of solid oxide fuel–cell composite electrodes’, J. Power Sources, Feb. 2009, 191, 240–252.
   Web of Science ®Google Scholar
• Jorgensen MJ, Primdahl S, Bagger C, Mogensen M: ‘Effect of sintering temperature on microstructure and performance of LSM–YSZ composite cathodes’, Solid State Ion., Nov. 2001, 139, 1–11.
   Web of Science ®Google Scholar
• Liu RZ, Wang SR, Huang B, Zhao CH, Li JL, Wang ZR, Wen ZY, Wen TL: ’Dip-coating and co-sintering technologies for fabricating tubular solid oxide fuel cells’, J. Solid State Electrochem., Nov. 2009, 13, 1905–1911.
   Web of Science ®Google Scholar
• Wang ZR, Qian JQ, Wang SR, Cao JD, Wen TL: ‘Improvement of anode-supported solid oxide fuel cells’, Solid State Ion., Mar. 2008, 179, 1593–1596.
   Web of Science ®Google Scholar
• Nguyen TL, Honda T, Kato T, Limura Y, Kato K, Negishi A, Nozaki K, Shiono M, Kobayashi A, Hosoda K, Cai ZF, Dokiya M: ‘Fabrication and characterization of anode supported tubular SOFCs with zirconia-based electrolyte for reduced temperature operation’, J. Electrochem. Soc., Feb. 2004, 151, (8), A1230–A1235.
   Web of Science ®Google Scholar
• Darbandi AJ, Enz T, Hahn H: ‘Synthesis and characterization of nanoparticulate films for intermediate temperature solid oxide fuel cells’, Solid State Ion., Jan. 2009, 180, 424–430.
   Web of Science ®Google Scholar
• Yamaguchi T, Shimizu S, Suzuki T, Fujishiro Y, Awano M: ‘Fabrication and evaluation of cathode-supported small scale tubular SOFCs’, Mater. Lett., Sept. 2008, 62, 1518–1520.
   Web of Science ®Google Scholar
• Du Y, Sammes NM: ‘Fabrication and properties of anode-supported tubular solid oxide fuel cells’, J. Power Sources, May 2004, 136, 66–71.
   Web of Science ®Google Scholar
• Jardiel T, Levenfield B, Jimenez R, Varez A: ‘Fabrication of 8-YSZ thin-wall tubes by powder extrusion moulding for SOFC electrolytes’, Ceram. Int., Aug. 2009, 35, 2329–2335.
   Web of Science ®Google Scholar
• Li CX, Li CJ, Yang GY: ‘Development of a Ni/Al2O3 cermet-supported tubular solid oxide fuel cell assembled with different functional layers by atmospheric plasma-spraying’, J. Therm. Spray Technol., Mar. 2009, 18, (1), 83–89.
   Web of Science ®Google Scholar
• Zhou W, Shi H, Ran R, Cai R, Shao Z, Jin W: Fabrication of an anode-supported yttria-stabilized zirconia thin film for solid-oxide fuel cells via wet powder spraying’, J. Power Sources, Jun. 2008, 184, 229–237.
   Web of Science ®Google Scholar
• Bessette N: ‘Status of the Acumentrics SOFC program’, Proc. SECA Annual Workshop, Pacific Grove, CA, USA, April2005, Acumentrics Corp., US DOE.
   Google Scholar
• Liktal T: ‘Ceramic/metallic heat exchanger development’, Proc. 10th Annual Solid State Energy Conversion (SECA) Workshop, Pittsburgh, PA, USA, July2009, Acumentrics Corp., US DOE.
   Google Scholar
• Fergus J, Hui R, Li X, Wilkinson DP, Zhang (eds) J: ‘Solid oxide fuel cells: materials properties and performance’, 1st edn; 2008, Boca Raton, FL, CRC Press, Inc., Taylor and Francis Group.
   Google Scholar
• Bance P, Brandon NP, Girvan B, Holbeche P, O’Dea S, Steele BCH: ‘Spinning-out a fuel cell company from a UK university – 2 years of progress at Ceres power’, J. Power Sources, Nov. 2004, 131, 86–90.
   Web of Science ®Google Scholar
• Kerr R: ‘Delphi SOFC stack development update’, Proc. 2009 SECA Annual Review Meet., Pittsburgh , PA, USA, August 2009, Delphi, US DOE.
   Google Scholar
• Mulot J, Niethammer M, Mukerjee S, Haltiner K, Shaffer S: ‘Development update on Delphi’ s solid oxide fuel cell systems’, Proc. Fundamentals and Developments of Fuel Cells Conf., Nancy, France, December2008, Electrochemical Society.
   Google Scholar
• Tietz F, Buchkremer HP, Stover D: ‘Components manufacturing for solid oxide fuel cells’, Solid State Ion., Jan. 2002, 152–153, 373–381.
   Web of Science ®Google Scholar
• Linderoth S: ‘Solid oxide cell R&D at Risø National Laboratory – and its transfer to technology’, J. Electroceram., Feb. 2009, 22, 61–66.
   Web of Science ®Google Scholar
• Borglum B: ‘Cell and stack development at versa power systems’, Proc. 10th Annual Solid State Energy Conversion (SECA) Workshop, Pittsburgh, PA, USA, July 2009, Versa Power Systems, US DOE.
   Google Scholar
• Devoe A, Devoe L: ‘A fuel cell technology breakthrough, the SOFC stick’, Technical report, Violet Fuel Cell Sticks, 7173 Construction Court, San Diego, CA, USA, February 2008.
   Google Scholar
• Vohs JM, Gorte RJ: ‘High-performance SOFC cathodes prepared by infiltration’, Adv. Mater., 2009, 21, 943–956.
   Web of Science ®Google Scholar
• Wang W, Huang Y, Jung S, Vohs JM, Gorte RJ: ‘A comparison of LSM, LSF, and LSCO for solid oxide electrolyzer anodes’, J. Electrochem. Soc., Jul. 2006, 153, (11), A2066–A2070.
   Web of Science ®Google Scholar
• Sholklapper TZ, Radmilovic V, Jacobsen CP, Visco SJ, Jonghe LCD: ‘Synthesis and stability of a nanoparticle-infiltrated solid oxide fuel cell electrode’, Electrochem. Solid-State Lett., Jan. 2007, 10, (4), B74–B76.
   Google Scholar
• Bidrawn F, Kim G, Aramrueang N, Vohs JM, Gorte RJ: ‘Dopants to enhance SOFC cathodes based on Sr-doped LaFeO3 and LaMnO3’, J. Power Sources, Feb. 2010, 195, (3), 720–728.
   Web of Science ®Google Scholar
• Chen XJ, Liu QL, Chan SH, Brandon NP, Khor KA: ‘High performance cathode supported SOFC with perovskite anode operating in weakly humidified hydrogen and methane’, Electrochem. Commun., Nov. 2007, 9, 767–772.
   Web of Science ®Google Scholar
• Dong Q, Du ZH, Zhang TS, Lu J, Song XC, Ma J: ‘Sintering and ionic conductivity of 8YSZ and CGO10 electrolytes with small addition of Fe2O3: a comparative study’, Int. J. Hydrogen Energy, Jun. 2009, 34, 7903–7909.
   Web of Science ®Google Scholar
• Besra L, Liu M: ‘A review on fundamentals and applications of electrophoretic deposition (EPD) of electrophoretic deposition (EPD)’, Prog. Mater. Sci., Jul. 2007, 52, 1–61.
   Web of Science ®Google Scholar
• Shearing PR, Brett DJL, Brandon NP: ‘Towards intelligent engineering of sofc electrodes: a review of advanced microstructural characterisation techniques’, Int. Mater. Rev., Nov. 2010, 55, (6), 347–363.
   Web of Science ®Google Scholar
• Thyden K, Liu YL, Bilde-Sorensen JB: ‘Microstructural characterization of SOFC Ni–YSZ anode composites by low-voltage scanning electron microscopy’, Solid State Ion., Dec. 2008, 178, 1984–1989.
   Web of Science ®Google Scholar
• Pratihar SK, Sharma AD, Basu RN, Maiti HS: ‘Preparation of nickel coated YSZ powder for application as an anode for solid oxide fuel cells’, J. Power Sources, Nov. 2004, 129, 138–142.
   Web of Science ®Google Scholar
• Wilson JR, Kobsiriphat W, Mendoza R, Chen HY, Hiller JM, Miller DJ, Thornton K, Voorhees PW, Adler SB, Barnett SA: ‘Three-dimensional reconstruction of a solid-oxide fuel-cell anode’, Nat. Mater., Jun. 2006, 5, (7), 541–544.
   PubMed Web of Science ®Google Scholar
• Wilson JR, Duong AT, Gameiro M, Chen HY, Thornton K, Mumm DR, Barnett SA: ‘Quantitative three-dimensional microstructure of a solid oxide fuel cell cathode’, Electrochem. Commun., Mar. 2009, 11, 1052–1056.
   Web of Science ®Google Scholar
• Shearing PR, Golbert J, Chater RJ, Brandon NP: ‘3d reconstruction of SOFC anodes using a focused ion beam lift-out technique’, Chem. Eng. Sci., May 2009, 64, 3928–3933.
   Web of Science ®Google Scholar
• Smith JR, Chen A, Gostovic D, Hickey D, Kundinger D, Duncan KL, DeHoff RT, Jones KS, Wachsman ED: ‘Evaluation of the relationship between cathode microstructure and electrochemical behaviour for SOFCs’, Solid State Ion., Oct. 2009, 180, 90–98.
   Web of Science ®Google Scholar
• Gostovic D, Smith JR, Kundinger DP, Jones KS, Wachsman ED: ‘Three-dimensional reconstruction of porous LSCF cathodes’, Electrochem. Solid-State Lett., Sept. 2007, 10, (12), B214–B217.
   Google Scholar
• Hauch A, Bowen JR, Kuhn LT, Mogensen M: ‘Nanoscale chemical analysis and imaging of solid oxide cells’, Electrochem. Solid-State Lett., 2008, 11, (3), B38–B41.
   Google Scholar
• Izzo JR, Joshi AS, Grew KN, Chiu WKS, Tkachuk A, Wang SH, Yun W: ‘Nondestructive reconstruction and analysis of SOFC anodes using X-ray computed tomography at sub-50 nm resolution’, J. Electrochem. Soc., Mar. 2008, 155, (5), B504–B508.
   Web of Science ®Google Scholar
• Shearing PR, Gelb J, Brandon NP: ‘X-ray nanocomputerised tomography of SOFC electrodes using a focused ion beam sample-preparation technique’, J. Eur. Ceram. Soc., 2010, 30, (8), 1809–1814.
   Web of Science ®Google Scholar
• Yamahara K, Sholklapper TZ, Jacobsen CP, Visco SJ, Jonghe LCD: ‘Ionic conductivity of stabilized zirconia networks in composite SOFC electrodes’, Solid State Ion., Mar. 2005, 176, 1359–1364.
   Web of Science ®Google Scholar
• Lanzini A, Leone P, Asinari P: ‘Microstructural characterization of solid oxide fuel cell electrodes by image analysis technique’, J. Power Sources, Apr. 2009, 194, 408–422.
   Google Scholar
• Shikazono N, Sakamoto Y, Yamaguchi Y, Kasagi N: ‘Microstructure and polarization characteristics of anode supported tubular solid oxide fuel cell with co-precipitated and mechanically mixed Ni-YSZ anodes’, J. Power Sources, Apr. 2009, 193, 530–540.
   Web of Science ®Google Scholar
• Huang QA, Hui R, Wang B, Zhang J: ‘A review of ac impedance modeling and validation in SOFC diagnosis’, Electrochim. Acta, May 2007, 52, 8144–8164.
   Web of Science ®Google Scholar
• EG&G Technical Services, Inc: ‘Fuel cell handbook’, 7th edn; 2004, Morgantown, WV, US Department of Energy, National Energy Technology Laboratory.
   Google Scholar
• Chen XJ, Chan SH, Khor KA: ‘Cyclic voltammetry of (La,Sr)MnO3 electrode on YSZ substrate’, Solid State Ion., 2003, 164, 17–25.
   Web of Science ®Google Scholar
• Liang M, Yo B, Wen M, Chen J, Xu J, Zhai Y: ‘Preparation of LSM–YSZ composite powder for anode of solid oxide electrolysis cell and its activation mechanism’, J. Power Sources, Dec. 2009, 190, 341–345.
   Web of Science ®Google Scholar
• Hauch A, Jensen SH, Ramousse S, Mogensen M: ‘Performance and durability of solid oxide electrolysis cells’, J. Electrochem. Soc., May 2006, 153, (9), A1741–A1747.
   Web of Science ®Google Scholar
• Schiller G, Ansar A, Lang M, Patz O: ‘High temperature water electrolysis using metal supported solid oxide electrolyser cells (SOEC)’, J. Appl. Electrochem., Sept. 2009, 39, 293–301.
   Web of Science ®Google Scholar
• Tanasini P, Cannarozzo M, Costamagna P, Faes A, Herle JV, Hessler-Wyser A, Comninellis C: ‘Experimental and theoretical investigation of degradation mechanisms by particle coarsening in SOFC electrodes’, Fuel Cells, 2009, 5, 740–752.
   Google Scholar
• Matsui T, Fujii H, Ozaki A, Takeuchi T, Kikuchi R, Eguchi K: ‘Degradation behavior of Ni–ScSZ cermet anode under various humidified conditions for solid oxide fuel cells’, J. Electrochem. Soc., Jun. 2007, 154, (12), B1237–B1241.
   Web of Science ®Google Scholar
• Klemensoe T, Chung C, Larsen PH, Mogensen M: ‘The mechanism behind redox instability of anodes in high-temperature SOFCs’, J. Electrochem. Soc., Jun. 2005, 152, (11), A2186–A2192.
   Web of Science ®Google Scholar
• Sarantaridis D, Chater RJ, Atkinson A: ‘Changes in physical and mechanical properties of SOFC Ni–YSZ composites caused by redox cycling’, J. Electrochem. Soc., Jan. 2008, 155, (5), B467–B472.
   Google Scholar
• Malzbender J, Wessel E, Steinbrech RW: ‘Reduction and re-oxidation of anodes for solid oxide fuel cells’, Solid State Ion., Jun. 2005, 176, 2201–2203.
   Web of Science ®Google Scholar
• Mawdsley JR, Carter JD, Kropf AJ, Yildiz B, Maroni VA: ‘Post-test evaluation of oxygen electrodes from solid oxide electrolysis stacks’, Int. J. Hydrogen Energy, Jul. 2009, 34, 4198–4207.
   Web of Science ®Google Scholar
• Kong J, Zhang Y, Deng C, Xu J: ‘Synthesis and electrochemical properties of LSM and LSF perovskites as anode materials for high temperature steam electrolysis’, J. Power Sources, Oct. 2009, 186, 485–489.
   Web of Science ®Google Scholar
• An CM, Song JH, Kang I, Sammes N: ‘The effect of porosity gradient in a nickel/yttria stabilized zirconia anode for an anode-supported planar solid oxide fuel cell’, J. Power Sources, Aug. 2010, 195, 821–824.
   Google Scholar
• Ni M, Leung MHK, Leung DYC: ‘A modeling study on concentration overpotentials of a reversible solid oxide fuel cell’, J. Power Sources, Sept. 2006, 163, 460–466.
   Web of Science ®Google Scholar
• Hauch A, Ebbesen SD, Jensen SH, Mogensen M: ‘Highly efficient high temperature electrolysis’, J. Mater. Chem., Jan. 2008, 18, 2331–2340.
   Google Scholar
• Mogensen M, Jensen SH, Hauch A, Chorkendorff I, Jacobsen T: ‘Performance of reversible solid oxide cells – a review’, Proc. Eur. Solid Oxide Fuel Cell Forum, Lucerne, Switzerland, July 2006, Page 301.
   Google Scholar