References
- Walley S. M.: ‘Historical origins of indentation hardness testing’, Mater. Sci. Technol., 2012, 28, (9–10), 1028–1044.
- Bull S. J., Sanderson L., Moharrami N. and Oila A.: ‘Effect of microstructure on hardness of submicrometre thin films and nanostructured devices’, Mater. Sci. Technol., 2012, 28, (9–10), 1177–1185.
- Vlassak J. J. and Nix W. D.: ‘Measuring the elastic properties of anisotropic materials by means of indentation experiments’, J. Mech. Phys. Sol., 1994, 42, 1223–1245.
- Li T. L., Bei H., Morris J. R., George E. P. and Gao Y. F.: ‘Scale effects in convoluted thermal/spatial statistics of plasticity initiation in small stressed volumes during nanoindentation’, Mater. Sci. Technol., 2012, 28, (9–10), 1055–1059.
- Armstrong R. W. and Elban W. L.: ‘Hardness properties across multiscales of applied loads and material structures’, Mater. Sci. Technol., 2012, 28, (9–10), 1060–1071.
- Salehinia I. and Bahr D. F.: ‘Inception of plasticity in copper single crystal in presence of stacking fault tetrahedra’, Mater. Sci. Technol., 2012, 28, (9–10), 1141–1146.
- Wang J. and Conrad H.: Effect of electric field on solute solubility in Al alloys measured by hardness’, Mater. Sci. Technol., 2012, 28, (9–10), 1198–1201.
- Marsh D. M.: Proc. R. Soc., 1964, A279, 420–35.
- Marsh D. M.: Proc. R. Soc., 1964, A282, 33–43.
- Johnson K. L.: ‘The correlation of indentation experiments’, J. Mech. Phys Sol., 1970, 18, 115–26.
- Atkinson C., Martínez-Esnaola J. M. and Elizalde M. R.: ‘Contact mechanics: a review and some applications’, Mater. Sci. Technol., 2012, 28, (9–10), 1079–1091.
- Mokios G. and Aifantis E. C.: ‘Gradient effects in micro-/nanoindentation’, Mater. Sci. Technol., 2012, 28, (9–10), 1072–1078.
- Nowak R., Chrobak D., Nagao S., Vodnick D. and Berg M.: ‘Mystery of current spike: nanoscale plasticity revisited’, Mater. Sci. Technol., 2012, 28, (9–10), 1202–1206.
- Gouldstone A., Chollacoop N., Dao M., Li J., Minor A. M. and Shen Y. L.: ‘Indentation across length scales: recent developments in experimentation and modelling’, Acta Mater., 2007, 55, (12), 4015–4039.
- Chang H. J., Fivel M., Rodney D. and Verdier M.: ‘Multiscale modelling of indentation in fcc metals: from atomic to continuum’, Comptes Rendus Physique, 2010, 11, 285–292.
- Minor A. M., Morris J. W. and A Stach E.: ‘Quantitative in situ nanoindentation in an electron microscope,’ Appl. Phys. Lett., 2001, 79, 1625–1627.
- Minor A. M., Lilleodden E. T., Stach E. A. and Morris J. W.: ‘Direct observations of incipient plasticity during nanoindentation of Al’, J. Mater. Res., 2004, 19, 176–182.
- Sundararajan G.: ‘Understanding dynamic indentation behaviour of metallic materials’, Mater. Sci. Technol., 2012, 28, (9–10), 1101–1107.
- Murr L. E.: ‘Correlating impact related residual microstructures through 2D computer simulations and microindentation hardness mapping: a review’, Mater. Sci. Technol., 2012, 28, (9–10), 1108–1126.
- Charitidis C. A.: ‘Multiscale approach of hardness in aluminium alloy: consideration of rate dependent behaviour’, Mater. Sci. Technol., 2012, 28, (9–10), 1127–1134.
- Haghshenas M., Wang L. and Klassen R. J.: ‘Depth dependence and strain rate sensitivity of indentation stress of 6061 aluminium alloy’, Mater. Sci. Technol., 2012, 28, (9–10), 1135–1140.
- Yeager J. D., Ramos K. J., Singh S., Rutherford M. E., Majewski J. and Hooks D. E.: ‘Nanoindentation of explosive polymer composites to simulate deformation and failure’, Mater. Sci. Technol., 2012, 28, (9–10), 1147–1155.