References
- T. Hashimoto, K. Ohnishi, M. Yamaguchi, M. Kinugawa and M. Ueda: ‘An analysis of the thermal load of mould plates in a continuous casting plant’, Hitachi Zosen Tech. Rev., 1982, 43, 1–9.
- B. G. Thomas, G. Li, A. Moitra and D. Habing: ‘Analysis of thermal and mechanical behaviour of copper moulds during continuous casting of steel slabs’, Proc. 80th Steelmaking Conf., Chicago, IL, USA, April 1997, ISS, 183.
- M. Langeneckert: ‘Influence of mould geometry on heat transfer, thermocouple and mould temperatures in the continuous casting of steel slabs’, MS thesis, University of Illinois, Chicago, IL, USA, 2001.
- B. G. Thomas, M. Langeneckert, L. Castella, M. Dziuba, G. Di Gresia and W. Balante: ‘Optimisation of narrow face water slot design for siderar slab casting mould’, Ironmaking Steelmaking, 2003, 30, 235–239.
- Z. W. Han, K. Feng, Y. Wang and J. H. Mao: ‘Optimum design on cooling framework of mould copper plate’, Foundry Technol., 2007, 28, 856–858.
- B. G. Thomas, J. Jiang and D. Lorento: ‘Optimization of water channel design in beam-blank moulds’, Proc. 5th Eur. Conf. on ‘Continuous casting conference’, Nice, France, 2005, ATS, 139–147.
- L. C. Hibbeler, S. Koric, K. Xu, B. G. Thomas and C. Spangler: ‘Thermo-mechanical modeling of beam blank casting’, Proc. AISTech 2008, Vol. 2, 135–148; 2008, Warrendale, PA, Association for Iron and Steel Technology.
- X. D. Liu and M. Y. Zhu: ‘Finite element analysis of thermal and mechanical behaviour in a slab continuous casting mould’, ISIJ Int., 2006, 46, 1652–1659.
- K. J. Schwerdtfeger: ‘The making, shaping, and treating of steel’, 11th edn, Casting volume, Chapter 4; 2003, Pittsburgh, PA, The AISE Steel Foundation.
- M. Y Liu, P. Li, X. J. Luan and D. L. Yu: ‘Design and calculation for slab caster’, 276; 1990, Beijing, Machine Industry Press.
- J. K. Park, B. G. Thomas, I. V. Samarasekera and U. Sok Yoon: ‘Thermal and mechanical behaviour of copper moulds during thinslab casting (II): mould crack formation’, Metall. Mater. Trans. B, 2002, 33B, 437–449.
- J. K. Park, B. G. Thomas, I. V. Samarasekera and U. Sok Yoon: ‘Thermal and mechanical behaviour of copper moulds during thinslab casting (I): plant trial and mathematical modeling’, Metall. Mater. Trans. B, 2002, 33B, 425–436.
- K. Kim, H. N. Han, T. Yeo, Y. Lee, K. H. Oh and D. N. Lee: ‘Analysis of surface and internal cracks in continuously cast beam blank’, Ironmaking Steelmaking, 1997, 24, 249–256.