References
- Yong QL, Liu ZD, Sun XJ, Cao JC, Zhao KY, Zhang Y, Cha XQ: ‘Theoretical calculation for equilibrium solubilities and compositional coefficient of titanium carbonitrides in Ti‐bearing microalloyed steel’, Steel Iron Vanad. Titan., 2005, 26, (3), 12.
- Maehara Y, Yasumoto K, Tomono H, Nagamichi T, Ohmori Y: ‘Surface cracking mechanism of continuously cast low‐carbon low‐alloy steel slabs’, Mater. Sci. Technol., 1990, 6, 793.
- Fu J, Zhou DG, Zhu J, Di L, Li J, ‘Control of nitrogen and titanium in the alloying steels’, J. Chn Rare Earth Soc., 2000, 18, 394.
- Liu QG: ‘An analysis of bubble formation conditions during ingot solidification’, Iron Steel, 1981, 16, (2), 13.
- Qu Y: ‘Principle of steelmaking’; 1994, Beijing, Metallurgical Industry Press.
- Chen JX: ‘Common charts and databook for steelmaking’; 1984, Beijing, Metallurgical Industry Press.
- Ohnake I: ‘Mathematical analysis of solute redistribution during solidification with diffusion in solid phase’, Trans. ISIJ, 1986, 26, 1045.
- Goto H, Miyazawa K, Yamada W, Tanaka K: ‘Effect of cooling rate on composition of oxides precipitated during solidification of steels’, ISIJ Int., 1995, 35, (6), 708
- Manohar PA, Dunne DP, Chandra T, Killmore CR: ‘Grain growth predictions in microalloyed steels’, ISIJ Int., 1996, 36, (2), 194.
- Goto H, Miyazawa K, Yamaguchi W, Tanaka K: ‘Effect of cooling rate on oxide precipitation during solidification of low carbon steels’, ISIJ Int., 1994, 34, (5), 414.
- Maugis P, Gouné M: ‘Kinetics of vanadium carbonitride precipitation in steel: a computer model’, Acta Mater., 2005, 53, 3359.
- Goto H, Miyazawa K, Yamada W, Kazuaki T: ‘Effect of cooling rate on composition of oxides precipitated during solidification of steels’, ISIJ Int., 1995, 35, (6), 708.