Solid freeform fabrication of ceramics

REFERENCES

• R. A. LINDBERG: ‘Processes and materials of manufacture’, 4th edn, 18-20; 1990, Boston, Allyn and Bacon.
   Google Scholar
• B. H. AMSTEAD, P. F. OSTWALD and M. L. BEGEMAN. ‘Manufacturing processes’, 8th edn; 1969, New York, Wiley.
   Google Scholar
• G. MAIR: ‘Mastering manufacturing’; 1993, London, Macmillan.
   Google Scholar
• A. GHOSH and A. K. MALIK: ‘Manufacturing science’; 1986, Chichester, Ellis Harwood.
   Google Scholar
• J. A. SCHEY: ‘Introduction to manufacturing processes’, 2-3; 1997, New York, McGraw-Hill.
   Google Scholar
• S. KALPAKJIAN: ‘Manufacturing processes for engineering materials’, 2nd edn, 6-7; 1991, New York, Addison Wesley.
   Google Scholar
• J. BOURRIAU: ‘Pottery from the Nile valley before the Arab conquest’, 15-18; 1981, Cambridge, Cambridge University Press.
   Google Scholar
• J. BALLATO, R. VAN WEEREN, M. AGARWALA, R. E. RIMAN and S. C. DANFORTH: Electron. Lett. , 1997, 33, 83–84.
   Web of Science ®Google Scholar
• ‘The new encyclopaedia Britannica’, 15th edn, Vol. 7, 313; 1995, Chicago, Encyclopaedia Britannica Inc.
   Google Scholar
• ‘The new encyclopaedia Britannica’, 15th edn, Vol. 9, 347; 1995, Chicago, Encyclopaedia Britannica Inc.
   Google Scholar
• R CALVERT: ‘Materials science and technology’, (ed. R. W. Cahn et al), Vol. 17, 51-82; 1996, Weinheim, VCH.
   Google Scholar
• J. R KRUTH: CIRP Ann., 1991, 40, 603–614.
   Google Scholar
• J. G. CONLEY and H. L. MARCUS: J. Manuf. Sci. Eng. ( Trans. ASME), 1997, 119, 811–816.
   Web of Science ®Google Scholar
• D. T. PHAM and R. S. GAULT: Int. J. Mach. Tools Manuf. , 1998, 38, 1257–1287.
   Web of Science ®Google Scholar
• P. F. JACOBS: ‘Rapid prototyping and manufacturing: funda-mentals of stereolithography’; 1993, New York, McGraw-Hill.
   Google Scholar
• J. G. ZHOU: Mater. Des. , 2000, 21, 61–63.
   Web of Science ®Google Scholar
• J. J. BEAMAN, J. W. BARLOW, D. L. BOURELL, R. H. CRAWFORD, H. L. MARCUS and K. P. MCALEA: ‘Solid freeform fabrication: a new direction in manufacturing’, 1-49 and 121-165; 1997, Dordrecht, Kluwer Academic.
   Google Scholar
• C. GRIFFIN, J. DANFENBACH and S. MCMILLIN. Bull. Am. Ceram. Soc. , 1994, 73, 109–113.
   Google Scholar
• D. HAUBER: Int. Powder Metall. , 1988, 24, 337–342.
   Web of Science ®Google Scholar
• D. KOCHAN: Comput. Ind. , 1992, 20, 133–140.
   Web of Science ®Google Scholar
• W. BAUER and R. KNITTER: J. Mater. Sci. , 2002,37, 3127-3140.
   Google Scholar
• C. K. CHUA: ‘Rapid prototyping; principles and applications in manufacturing’; 1997, New York, Wiley.
   Google Scholar
• H. L. MARCUS, S. HARRISON and J. CROCKER: Proc. Int. Symp. on ‘Information storage and processing systems’, Vol. 4, 3-9; 1996, New York, ASME.
   Google Scholar
• I. SHISHKOVSKY: Rapid Prototyp. J., 2001, 7, 138-147 and 207-211.
   Google Scholar
• J. W. HALLORAN: Br. Ceram. Trans. , 1999, 98, 299–303.
   Web of Science ®Google Scholar
• S. AU and P. K. WRIGHT: ‘Intelligent concurrent designs: fundamentals, methodology, modelling and practice’, Vol. 66, 73-82; 1993, New York, ASME.
   Google Scholar
• L. TRYGG: Int. J. Human Factors Manuf. , 1994, 4, 321–338.
   Google Scholar
• G. M. A. COX: Foundryman, 1996, 89, 331–337.
   Google Scholar
• P. M. DICKENS: Proc. Inst. Mech. Eng. , 1995, 209, 261–266.
   Web of Science ®Google Scholar
• C. K. CHITA, S. M. CHOU and T. S. WONG: Int. J. Adv. Manuf. Technol. , 1998, 14, 146–152.
   Web of Science ®Google Scholar
• J. W. SEARS: Int. J. Powder Metall. , 2001, 37, 29–30.
   Google Scholar
• G. WANG and V. D. KRSTIC: J. Can. Ceram. Soc. , 1998,67, 52–57.
   Google Scholar
• R. IRVING: Int. J. Powder Metall. , 2000, 7, 32–41.
   Google Scholar
• J. HEINZL and C. H. HERTZ: Electron. Electron Phys. , 1985, 65, 91–171.
   Web of Science ®Google Scholar
• N. P. FUSTER: Assem. Autom. , 1997, 17, 525–540.
   Google Scholar
• J. D. CAWLEY: Proc. Int. Gas Turbine and Aeroengine Congress and Exhibition, Orlando, FA, 1-6; 1997, New York, American Society of Mechanical Engineers.
   Google Scholar
• M. L. GRIFFITH and J. W. HALLORAN: J. Am. Ceram. Soc. , 1996, 79, 2601–2608.
   Web of Science ®Google Scholar
• M. K. AGARWALA, A. BANDYOPADHYAY, R. VAN WEEREN, N. A. LANGRANA, A. SAFARI, S. C. DANFORTH, V. R. JAMALABAD, P. J. WHALEN, R. DONALDSON and J. POLLINGER: Proc. Symp On ‘Solid freeform fabrication’, 326-334; 1996, Austin, TX, University of Texas at Austin.
   Google Scholar
• P. K. SUBRAMANIAN and H. L. MARCUS: Mater. Manuf. Process. , 1995, 10, 689–706.
   Web of Science ®Google Scholar
• E. A. GRIFFIN, D. R. MUMM and D. B. MARSHALL: Am. Ceram. Soc. Bull. , 1996, 75, 65–68.
   Web of Science ®Google Scholar
• J. D. CAWLEY, A. H. HEUER, W. S. NEWMAN and B. B. MATHEWSON: Am. Ceram. Soc. Bull. , 1996, 75, 75–79.
   Web of Science ®Google Scholar
• M. J. CIMA, J. YOO, S. KHANUJA, M. RHYNERSON and D. NAMMOUR: Proc. Symp. on ‘Solid freeform fabrication’, (ed. H. L. Marcus et al), 479-488; 1995, Austin, TX, University of Texas at Austin.
   Google Scholar
• M. J. EDIRISINGHE: Proc. 1998 TMS Fall Meeting, (ed. T. S. Srivatsan and K. A. Khor), 139-150; 1998, Warrendale, PA, TMS.
   Google Scholar
• O. LEHMANN and M. STUKE: Mater. Lett., 1994, 21, 131-136.
   Google Scholar
• R. H. LEACH, R. J. PIERCE, E. P. HICKMAN, M. J. MACKENZIE and H. G. SMITH: ‘The printing ink manual’, 5th edn, 14-85; 1999, Dordrecht, Kluwer Academic.
   Google Scholar
• N. S. LEYLAND, J. R. G. EVANS and D. J. HARRISON: J. Euro. Ceram. Soc. , 2002, 22, 1–13.
   Web of Science ®Google Scholar
• J. VECHEMBRE, L. SAGALOWICZ and N. SETTER: Ferroelectrics, 1999, 224, 573–580.
   Web of Science ®Google Scholar
• A. KAWAHARA, H. KATSUKI and M. EGASHIRA: Key Eng. Mater. , 1999, 159, 175–180.
   Google Scholar
• J. Y. H. FUH, Y. S. CHOU, A. Y. C. NEE, L. LU and K. C. LEE: Mater. Des. , 1995, 16, 23–32.
   Web of Science ®Google Scholar
• s. MARUO and K. IKUTA: Sensors Actuators A, 2002,100, 70–76.
   Web of Science ®Google Scholar
• M. L. GRIFFITH and J. W. HALLORAN: J. Appl. Phys. , 1997, 81, 2538–2546.
   Web of Science ®Google Scholar
• H. M. LiAo and T. W. COYLE: J. Can. Ceram. Soc. , 1996, 65, 254–262.
   Web of Science ®Google Scholar
• H. KODAMA: Rev. Sci. Intrum. , 1981, 52, 1770–1773.
   Web of Science ®Google Scholar
• R. GLARDON, N. KARAPATIS and V. ROMANO: Cirp Ann., Manuf. Technol. , 2001, 50, 133–136.
   Web of Science ®Google Scholar
• F. DOREAU, C. CHAPUT and T. CHARTIER: Adv. Eng. Mater. , 2000, 2, 493–496.
   Web of Science ®Google Scholar
• T. CHARTIER, C. CHAPUT, F. DOREAU and M. LOISEAU: Key Eng. Mater. , 2002, 206, 293–296.
   Google Scholar
• A. LICCIULLI, A. GRECO and A. MAFFEZZOLI: Ind. Ceram. , 2000, 20, 97–99.
   Google Scholar
• A. GRECO, A. LICCIULLI and A. MAFFEZZOLL J. Mater. Sci. , 2001, 36, 99–105.
   Web of Science ®Google Scholar
• J. S. YOUNG, S. R. FOX and K. S. ANSETH: J. Manuf. Sci. Eng. ( Trans. ASME), 1999, 121, 474–477.
   Web of Science ®Google Scholar
• S. MONNERET, C. PROVIN, H. LE GALL and S. CORBEL: Micros yst. Technol. , 2002, 8, 368–374.
   Google Scholar
• S. MONNERET, H. LE GALL, V. BADE, F. DEVAUS, A. MOSSET and E. LANTZ: Euro. Phys. J., Appl. Phys. , 2002, 20, 213–218.
   Google Scholar
• M. L. WU, W. H. ZHAO, Y. P. TANG, D. C. LI and B. H. LU: Rapid Prototyp. J. , 2001, 77, 268–274.
   Google Scholar
• C. SUN and X. ZHANG: J. Appl. Phys. , 2002, 92, 4796–4802.
   Web of Science ®Google Scholar
• T. CHARTIER, C. CHAPUT, F. DOREAU and M. LOISEAU: J. Mater. Sci. , 2002, 37, 3141-3147.
   Google Scholar
• P. RISTHAUS, D. GOHRING and R. KNITTER: Key Eng. Mater. , 2002, 206, 337–340.
   Google Scholar
• R. KNITTER, D. GOHRING, P. RISTHAUS and J. HAUSSELT: Microsyst. Technol. , 2001, 7, 85–90.
   Google Scholar
• R. KNITTER, W. BAUER and D. GOHRING: Adv. Eng. Mater. , 2001, 3,49–54.
   Web of Science ®Google Scholar
• L. W. WANG, J. YANEZ, W. M. SIGMUND and F. ALDINGER: Ind. Ceram. , 2000, 20, 93–94.
   Google Scholar
• T. M. G. CHU, J. W. HALLORAN, S. J. HOLLISTER and S. E. FEINBERG: J. Mater. Sci., Mater. Med. , 2001, 12, 471–478.
   Google Scholar
• T. M. G. CHU, S. J. HOLLISTER, J. W. HALLORAN, S. E. FEINBERT and D. G. ORTON: Repar. Med.: Grow. Tiss. Org., Ann. New York Acad. Sci. , 2002, 961, 114–117.
   PubMed Web of Science ®Google Scholar
• T. M. G. CHU, D. G. ORTON, S. J. HOLLISTER, S. E. FEINBERG and T. W. HALLORAN: Biomaterials, 2002, 23, 1283–1293.
   PubMed Web of Science ®Google Scholar
• D. T. PHAM, S. S. DIMOV and R. S. GAULT: Int. J. Adv. Manuf. Technol. , 1999, 15, 674–682.
   Web of Science ®Google Scholar
• W. Y. MA and P. R. HE: J. Mater. Process. Technol, 1999, 90, 191–197.
   Web of Science ®Google Scholar
• J. H. LEE, R. K. PRUD'HOMME and I. A. AKSAY: J. Mater. Res. , 2001, 16 3536–3544.
   Web of Science ®Google Scholar
• D. T. PHAM: Proc. Inst. Mech. Eng. C, J. Mech. Eng. Sci. , 2000, 214, 635–640.
   Google Scholar
• S. S. CRUMP: Proc. 2nd Int. Conf. on ‘Rapid prototyping’, 354-357; 1991, Dayton, OH, University of Dayton.
   Google Scholar
• Q. DAO, J. C. FRIMODIG, H. N. LE, X. Z. LI, S. B. PUTNAM, K. GOLDA, J. FOYOS, R. NOORANI and B. FRITZ: Comput. Appl. Eng. Educ. , 1999,7, 186–195.
   Web of Science ®Google Scholar
• C. w. ZIEMIAN and P. M. CRAWN: Rapid Prototyp. J. , 2001, 7, 138–147.
   Web of Science ®Google Scholar
• P. KULKARNI and D. DISTTA: J. Manuf. S ci. Eng. ( Trans. ASME), 1999, 121, 93–103.
   Web of Science ®Google Scholar
• S. RANGARAJAN, G. QI, N. VENKATARAMAN, A. SAFARI and S. C. DANFORTH: J. Am. Ceram. Soc. , 2000, 83, 1663–1669.
   Web of Science ®Google Scholar
• A. SAFARI: Ferroelectrics, 2001, 263, 1345–1354.
   Web of Science ®Google Scholar
• I. TSAO, S. C. DANFORTH and A. B. METZNER: J. Am. Ceram. Soc. , 1993, 76, 2977–2984.
   Web of Science ®Google Scholar
• F. N. COGSWELL: ‘Polymer melt theology’, 136-137; 1981, New York, Halstead Press/Wiley.
   Google Scholar
• Y. N. YAN, R. J. ZHANG, G. D. HONG and X. M. YUAN: Mater. Des. , 2000, 21, 93–99.
   Web of Science ®Google Scholar
• M. GREUL, T. PINTANT and M. GREULICH Comput. Ind. , 1995, 28, 23–28.
   Web of Science ®Google Scholar
• M. GREUL and R. LENK: Ind. Ceram. , 2000, 20, 115–117.
   Google Scholar
• M. GEIGER, W. STEGER, M. GREUL and M. SINDEL: EARP Newsletter, (3), 1994.
   Google Scholar
• G. M. LOUS, I. A. CORNEJO, T. F. MCNULTY, A. SAFARI and S. C. DANFORTH: J. Am. Ceram. Soc. , 2000, 83, 124–128.
   Web of Science ®Google Scholar
• A. BANDYOPADHYAY, R. K. PANDA, V. E. JANAS, M. K. AGARWALA, S. C. DANFORTH and A. SAFARI: J. Am. Ceram. Soc. , 1997, 80, 1366–1372.
   Web of Science ®Google Scholar
• A. SAFARI, S. DANFORTH, R. PANDA and T. MCNULTY: J. Korean Phys. Soc. , 1998, 32, S1733—S1736.
   Web of Science ®Google Scholar
• A. SAFARI: Mater. Res. Innov. , 1999, 2, 263–269.
   Google Scholar
• A. SAFARI and S. C. DANFORTH: FetT0eieetrieS, 1999, 231, 731–745.
   Google Scholar
• S. TURCU, B. JADIDIAN, S. C. DANFORTH and A. SAFARI: J. Electroceram. , 2003, 9, 165–171.
   Web of Science ®Google Scholar
• Y. CHEN, D. BARTZOS, Y. LU, E. NIVER, M. E. PILLEUX, M. ALLAHVERDI, S. C. DANFORTH and A. SAFARI: Microwave Opt. Technol. Lett. , 2001, 30, 305–307.
   Web of Science ®Google Scholar
• A. BANDYOPADHYAY, R. K. PANDA, T. F. MCNULTY, F. MOHAMMADI, S. C. DANFORTH and A. SAFARI: Rapid Prototyp. J. , 1998, 4, 37–49.
   Web of Science ®Google Scholar
• D. GUO, K. CAI, C. NAN, L. T. LI and Z. L. GUL: Ser. Mater. , 2002, 47, 383–387.
   Google Scholar
• M. ALLAHVERDI, S. C. DANFORTH, M. JAFARI and A. SAFARI: J. Euro. Ceram. Soc. , 2001, 21, 1485–1490.
   Web of Science ®Google Scholar
• M. ALLAHVERDI, A. HALL, R. BRENNAN, M. E. EBRAHIMI, N. M. HASH and A. SAFARI: J. Electroceram. , 2002,8, 129–137.
   Web of Science ®Google Scholar
• S. BOSE, S. SUGUIRA and A. BANDYOPADHYAY: Ser. Mater. , 1999, 41, 1009–1014.
   Web of Science ®Google Scholar
• J. E. SINAY, G. M. GRATSON, R. F. SHEPHERD, J. CESARANO and J. A. LEWIS: Adv. Mater. , 2002, 14, 1279.
   Web of Science ®Google Scholar
• J. E. SMAY, J. CESARANO and J. A. LEWIS: Langmuir, 2002, 18, 5429–5437.
   Web of Science ®Google Scholar
• R. VAIDYANATHAN, J. WALISH, J. L. LOMBARDI, S. KASICHAINULA, P. CALVERT and K. C. COOPER: JOM, 2000, 52, 34–37.
   Web of Science ®Google Scholar
• J. L. LOMBARDI and P. CALVERT: Polymer, 1999, 40, 1775–1779.
   Web of Science ®Google Scholar
• J. TYBERG and J. H. BOHN: Mater. Des. , 1999, 20, 77–82.
   Web of Science ®Google Scholar
• A. A. TSENG and M. TANAKA: Rapid Prototyp. J. , 2001,7, 6–17.
   Web of Science ®Google Scholar
• M. K. AGARWALA, A. BANDYOPADHYAY, R. VAN WEEREN, A. SAFARI, S. C. DANFORTH, N. A. LANGRANA, V. R. JAMALABAD and R J. WHALEN: Am. Ceram. Soc. Bull. , 1996, 75, 60–65.
   Web of Science ®Google Scholar
• B. A. TUTTLE, J. E. SINAY, J. COSARANO, J. A. VOIGT, T. W. SCOFIELD and w. OLSON: J. Am. Ceram. Soc. , 2001,84, 872–874.
   Web of Science ®Google Scholar
• J. CESARANO, R. SEGALMAN and P. CALVERT: Ceram. Ind. , 1998, 148, 94–102.
   Google Scholar
• C. W. SOUVIGNIER, T. B. SEROCOMBE, S. H. HUO, P. CALVERT and G. B. SCHAFTER: J. Mater. Res. , 2001, 16, 2613–2618.
   Web of Science ®Google Scholar
• S. FINKE and F. K. FEENSTRA: J. Mater. Sci. , 2002,37, 3101-3106.
   Google Scholar
• G. HILMAS: Mater. Technol. , 1996, 11, 226–228.
   Google Scholar
• B. KHOSHNEVIS, S. BUKKAPATNAM, H. KWON and J. SAITO: Rapid Prototyp. J. , 2001,7 32–41.
   Web of Science ®Google Scholar
• C. J. GASDASKA, R. CLANCY, V. JAMALABAD and D. DALFONZO: in ‘Solid freeform and additive fabrication’, MRS Symp. Proc. 542, 79-84; 1999, Warrendale, PA, Materials Research Society.
   Google Scholar
• S. RANGARAJAM, I. POZSGAI, J. MCINTOSH, R. MCCUISTON, B. L. HARPER, N. LANGRANA, A. SAFARI, S. C. DANFORTH, R. B. CLANCY, C. GASDASKA and P. J. WHALEN; in ‘Solid freeform and additive fabrication’, MRS Symp. Proc. 542,97-103; 1999, Warrendale, PA, Materials Research Society.
   Google Scholar
• S. L. MORISSETTE, J. A. LEWIS, J. CESARANO, D. B. DIMOS and T. Y. BAER: J. Am. Ceram. Soc. , 2000, 83, 2409–2416.
   Web of Science ®Google Scholar
• M. GREUL: Mater. Technol. , 1996, 11, 140–142.
   Google Scholar
• P. YANG, D. DIMOS, M. A. RODRIGUEZ, R. F. HUANG, S. DAI and D. WILCOX: in ‘Solid freeform and additive fabrication’, MRS Symp. Proc. 542, 159-164; 1999, Warrendale, PA, Materials Research Society.
   Google Scholar
• B. H. KING, D. DIMOS, P. YANG and S. L. MORISSETTE: J. Electroceram. , 1999, 3, 173–178.
   Web of Science ®Google Scholar
• V. TOHVER, S. L. MORISSETTE, J. A. LEWIS, B. A. TUTTLE, J. A. VOIGT and D. B. DIMOS: J. Am. Ceram. Soc. , 2002,85, 123–128.
   Web of Science ®Google Scholar
• S. L. MORISSETTE, J. L. LEWIS, P. G. CLEM, J. CESARANO and D. B. DIMOS: J. Am. Ceram. Soc. , 2001, 84, 2462–2468.
   Web of Science ®Google Scholar
• D. L. BOURELL, H. L. MARCUS, J. W. BARLOW and J. J. BEAMAN: Int. J. Powder Metall. , 1992, 28, 369–381.
   Web of Science ®Google Scholar
• C. L. ATWOOD, M. C. MAGUIRE, B. T. PARDO and E. A. BRYCE: SAMPE J., 1996, 32, 55–60.
   Google Scholar
• S. DAS, M. WOHLERT, J. J. BEAMAN and D. L. BOURELL: Mater. Des. , 1999, 20, 115–121.
   Web of Science ®Google Scholar
• J. PEGNA: Autom. Constr. , 1997, 5, 427–437.
   Google Scholar
• X. u, H. cuoi and Y. YANG: Thin Solid Films, 2002, 420-421, 515–523.
   Web of Science ®Google Scholar
• S. YANG and J. R. G. EVANS: Powder Technol., 2003, 133, 251–254.
   Web of Science ®Google Scholar
• D. T. PHAM and X. WANG: Proc. Inst. Mech. Eng. B, J. Eng. Manuf. , 2000, 214, 425–430.
   Google Scholar
• K. MCALEA, P. FORDERHASE, U. HEJMADI and C. NELSON: Proc. 7th Int. Conf. on ‘Rapid prototyping’, (ed. A. J. Lightman et al), 23-33; 1997, Dayton, OH, University of Dayton.
   Google Scholar
• N. K. VAIL and J. W. BARLOW: Proc. Symp. on ‘Solid freeform fabrication’, (ed. H. L. Marcus et al), 124-130; 1992, Austin, TX, University of Texas at Austin.
   Google Scholar
• U. LAKSHMINARAYAN and H. L. MARCUS: Proc. Symp. 011 ‘Solid freeform fabrication’, (ed. H. L. Marcus et al), 44-53; 1992, Austin, TX, University of Texas at Austin.
   Google Scholar
• w Z. wu and M. G. YAN : J. Adv. Mater. , 2002, 34, 25–28.
   Web of Science ®Google Scholar
• P. K. SUBRAMANIAN, G. ZONG and H. L. MARCUS: Proc. Symp. on ‘Solid freeform fabrication’, (ed. H. L. Marcus et al), 63-71; 1992, Austin, TX, University of Texas at Austin.
   Google Scholar
• J. C. NELSON, S. XUE, J. W. BARLOW, J. J. BEAMAN, H. L. MARCUS and D. L. BOURELL: Ind. Eng. Chem. Res. , 1993, 32, 2305–2317.
   Web of Science ®Google Scholar
• J. C. NELSON, N. K. VAIL, J. W. BARLOW, J. J. BEAMAN, D. L. BOURELL and H. L. MARCUS: Ind. Eng. Chem. Res. , 1995, 34, 1641–1651.
   Web of Science ®Google Scholar
• N. VOLPATO, T. H. C. CHILDS, T. D. STEWART and P. WATSON: Proc. Inst. Mech. Eng. B, J. Eng. Manuf. , 2001, 215, 873–876.
   Google Scholar
• A. SIMCHI, F. PETZOLDT and H. POHL: Int. J. Powder Metall. , 2001, 37, 49–61.
   Web of Science ®Google Scholar
• J. BEUTH and N. KLINGBEIL: JOM, 2001, 53, 36–39.
   Web of Science ®Google Scholar
• M. L. GRIFFITH, M. E. SCHLIENGER, L. D. HARWELL, M. S. OLIVER, M. D. BALDWIN, M. T. ENSZ, M. ESSIEN, J. BROOKS, C. V. ROBINO, J. E. SMUGERESKY, W. H. HOFMEISTER, M. J. WERT and D. V. NELSON: Mater. Des. , 1999, 20, 107–113.
   Web of Science ®Google Scholar
• A. V. GUSAROV, T. LAOUI, L. FROYEN and V. I. TITOV: Int. J. Heat Mass Transf. , 2003, 46, 1103–1109.
   Web of Science ®Google Scholar
• P. FISCHER, N. KARAPATIS, V. ROMANO, R. GLARDON and H. P. WEBER: Appl. Phys. A, Mater. Sci. Process. , 2002,74, 467–474.
   Web of Science ®Google Scholar
• L. S. MELVIN and J. J. BEAMAN: Proc. Symp. 011 ‘Solid freeform fabrication’, (ed. H. L. Marcus), 171-177; 1991, Austin, TX, University of Texas at Austin.
   Google Scholar
• L. S. MELVIN and J. J. BEAMAN: Proc. 3rd Symp. 011 ‘Solid freeform fabrication’, (ed. H. L. Marcus et al), 118-123; 1992, Austin, TX, University of Texas at Austin.
   Google Scholar
• D. E. BUNNELL, S. DAS, D. L. BOURELL, J. B. BEAMAN and H. L. MARCUS: Proc. Symp. on ‘Solid freeform fabrication’, (ed. H. L. Marcus et al), 440-447; 1995, Austin, TX, University of Texas at Austin.
   Google Scholar
• L. LU, J. Y. H. FUH, Z. D. CHEN, C. C. LEONG and Y. S. WONG: Mater. Res. Bull. , 2000, 35, 1555–1561.
   Web of Science ®Google Scholar
• J. D. CAWLEY: Curr. Opin. Solid State Mater. Sci. , 1999, 4, 483–489.
   Google Scholar
• D. A. KLOSTERMAN, R. P. CHARTOFF, N. R. OSBORNE, G. A. GRAVES, A. LIGHTMAN, G. HAN, A. BEZEREDI, S. RODRIGUES, S. PAK, G. KALMANOVICH, L. DODIN and S. TU: Am. Ceram. Soc. Bull. , 1998, 77, 69–74.
   Google Scholar
• A. DAS, G. MADRAS, N. DASGUPTA and A. M. UMARJI: J. Euro. Ceram. Soc. , 2003, 23, 1013–1017.
   Web of Science ®Google Scholar
• Y. ZHANG, X. HE, J. HAN, X. DO and Z. ZHANG: Int. J Adv. Manuf. Technol. , 2001, 17, 531–534.
   Web of Science ®Google Scholar
• D. KOCHAN and T. DIMMER: Ceram. Forum Int. , 1999, 76, 5–9.
   Google Scholar
• Y. M. ZHANG, J. C. HAN, X. H. ZHANG, X. D. HE, Z. Q. LI and S. Y. DU: Mater. Sci. Eng. , 2001, 299, 218–224.
   Google Scholar
• D. KLOSTERMANN, R. CHARTOFF, N. OSBORNE and G. GRAVES: Ceram. Eng. Sci. Proc. , 1997, 18, 113–120.
   Web of Science ®Google Scholar
• s. s. CRUMP: ‘Intelligent design and manufacturing for proto-typing’, (ed. A. Bachi and J. J. Beaman), Vol. 50, 53-60; 1991, New York, American Society of Mechanical Engineers.
   Google Scholar
• J. P. KRUTH, M. C. LEU and T. NAKAGAWA: CIRP Ann., 1998, 47, 525–540.
   Google Scholar
• o. LEHMANN and M. STUKE: Science, 1995, 270, 1644–1646.
   Web of Science ®Google Scholar
• o. LEHMANN and M. STUKE: J. Phys. IF 1995, 5, C5-601—05-605.
   Google Scholar
• M. C. WANKE, O. LEHMANN, K. MULLER, Q. Z. WEN and M. STUKE: Science, 1997, 275, 1284–1286.
   PubMed Web of Science ®Google Scholar
• J. L. MAXWELL, J. PEGNA and D. V. MESSIA: Appl. Phys. A, Mater. Sci. Process. , 1998, 67, 323–329.
   Google Scholar
• F. T. WALLENBERGER: Science, 1995, 267, 1274–1275.
   PubMed Web of Science ®Google Scholar
• L. SUN and L. L. SHAW: Metall. Mater. Trans. A, 1999, 30A, 2549–2551.
   Google Scholar
• L. SUN, J. E. CROCKER, L. L. SHAW and H. L. MARCUS: in ‘Solid freeform and additive fabrication’, MRS Symp. Proc. 542, 37-44; 1999, Warrendale, PA, Materials Research Society.
   Google Scholar
• C. DUTY, D. JEAN and W. J. LACKEY: Mt. Mater. Rev. , 2001, 46, 271–287.
   Google Scholar
• B. R. BIRMINGHAM, J. V. TOMPKINS, S. L. HARRISON and H. L. MARCUS: Proc. 2nd Int. Conf. on ‘Beam processing of advanced materials’, (ed. T. S. Srivatsan and J. J. Moore), 105-117; 1996, Warrendale, PA, TMS.
   Google Scholar
• J. MAXWELL and J. PEGNA: Proc. Symp. on ‘Solid freeform fabrication’, (ed. H. L. Marcus et al.), 143-150; 1995, Austin, TX, University of Texas at Austin.
   Google Scholar
• E. SACHS, M. CIMA, P. WILLIAMS, D. BRANCAZIO and J. CORNIE: J. Eng. Ind. , 1992, 114, 481–488.
   Web of Science ®Google Scholar
• E. SACHS, M. CIMA, J. CORNIE, D. BRANCAZIO, J. BREDT, A. CURODEAU, T. FAN, S. KHANUJA, A. LAUDER, J. LEE and S. MICHAELS: CIRP Ann., 1993, 42, 257–260.
   Google Scholar
• Y. UZIEL: SME technical paper PE98-117-2, 1-8; 1997, Dearborn, MI, Society of Manufacturing Engineers.
   Google Scholar
• E. M. SACHS: ‘Powder dispensing apparatus using vibration’, US Patent 6036777, 14 March 2000.
   Google Scholar
• S. MICHAELS, E. M. SACHS and M. J. CIMA: Proc. Symp. on ‘Solid freeform fabrication’, (ed. H. L. Marcus et al.), 244-250; 1992, Austin, TX, University of Texas at Austin.
   Google Scholar
• A. CARRION: Rapid Prototyp. J. , 1997,3, 99–115.
   Web of Science ®Google Scholar
• J. YOO, K. M. CHO, W. S. BAE, M. CIMA and S. SURESH: J. Am. Ceram. Soc. , 1998, 81, 21–32.
   Web of Science ®Google Scholar
• T. R. JACKSON, H. LIU, N. M. PATRIKALAKIS, E. M. SACHS and M. J. CIMA: Mater. Des. , 1999, 20, 63–75.
   Web of Science ®Google Scholar
• A. CURODEAU, E. SACHS and S. CALDARISE: J. Biomed. Mater. Res. , 2000, 53, 525–535.
   PubMed Web of Science ®Google Scholar
• S. A. UHLAND, R. K. HOLMAN, M. J. CIMA, E. SACHS and Y. ENOKIDO: in ‘Solid freeform and additive fabrication’, MRS Symp. Proc. 542, 153-158; 1999, Warrendale, PA, Materials Research Society.
   Google Scholar
• F. F. LANGE: J. Amer. Ceram. Soc. , 1984, 66, 83–89.
   Web of Science ®Google Scholar
• R. K. HOLMAN, S. A. UHLAND, M. J. CIMA and E. SACHS: J. Colloid Interf. Sci. , 2002, 247, 266–274.
   PubMedGoogle Scholar
• R. K. HOLMAN, M. J. CIMA, S. A. UHLAND and E. SACHS: J. Colloid Interf. Sci. , 2002, 249, 432–440.
   PubMed Web of Science ®Google Scholar
• J. MOON, J. E. GRAU, V. KNEZEVIC, M. J. CIMA and E. M. SACHS: J. Am. Ceram. Soc. , 2002, 85, 755–762.
   Web of Science ®Google Scholar
• J. MOON, J. E. GRAU, M. J. CIMA and E. M. SACHS: J. Am. Ceram. Soc. , 2000, 83, 2401–2408.
   Web of Science ®Google Scholar
• S-F. F. LEE, E. SACHS and M. CIMA: Rapid Prototyp. J. , 1995, 1, 24–37.
   Google Scholar
• A. M. ALLEN and E. M. SACHS: Met. Mater. (Korea), 2000, 6, 589–594.
   Web of Science ®Google Scholar
• J. MOON, A. C. CABALLERO, L. HOZER, Y. M. CHIANG and M. J. CIMA: Mater. Sci. Eng. A, 2001, 298, 110–119.
   Web of Science ®Google Scholar
• E. SACHS, E. WYLONIS, S. ALLEN, M. CIMA and H. L. GUO: Polym. Eng. Sci. , 2000, 40, 1232-1247.
   Google Scholar
• J. R. G. EVANS: Br. Ceram. Trans. , 2001, 100, 124–128.
   Web of Science ®Google Scholar
• B. J. RAMSEY, P. S. A. EVANS and D. HARRISON: J. Electronic Manuf, 1997, 7, 63–67.
   Web of Science ®Google Scholar
• A. J. WALTON, J. T. M. STEVENSON, L. I. HAWORTH, M. FALLON, P. S. A. EVANS, B. J. RAMSEY and D. HARRISON: IEICE Trans. Electron, 1999, E82C, 576-581.
   Google Scholar
• P. R. SHEPHERD, P. S. A. EVANS, B. J. RAMSEY and D. J. HARRISON: Electron. Lett. , 1997, 33 483–484.
   Web of Science ®Google Scholar
• P. F. BLAZDELL, J. R. G. EVANS, M. J. EDIRISINGHE, P. SHAW and M. J. BINSTEAD: J. Mater. Sci. Lett. , 1995, 14, 1562–1565.
   Google Scholar
• M. J. EDIRISINGHE: Mater. World, 1997, 5, 138–140.
   Web of Science ®Google Scholar
• M. MOTT and J. R. G. EVANS: Mater. Sci. Eng. A, 1999, 271, 344–352.
   Web of Science ®Google Scholar
• W. J. LLOYD and H. H. TAUB: in ‘Output hardcopy devices’, (ed. R. C. Durbeck and S. Sherr), 311-370; 1988, New York/Boston, Academic Press.
   Google Scholar
• M. R. KEELING: Phys. Technol. , 1981, 12, 196–203.
   Google Scholar
• H. P. LE: J. Imaging Sci. Technol. , 1998, 42, 49–62.
   Web of Science ®Google Scholar
• L. KUHN and R. A. MYERS: Am. Sci. , 1979, 240, 120–132.
   Google Scholar
• E. LITBORN, M. STJERNSTRoM and J. ROERAADE: Anal. Chem. , 1998, 70, 4847–4852.
   Web of Science ®Google Scholar
• P. öNNERFJORD, J. NILSSON, L. WALLMAN, T. LAURELL and G. MARKO-VARGA: Anal. Chem. , 1998, 70, 4755–4760.
   PubMed Web of Science ®Google Scholar
• A. V. LEMMO, D. J. ROSE and T. C. TISONE: CUM Opin. Biotechnol. , 1998,9, 615–617.
   PubMed Web of Science ®Google Scholar
• K. R. OLDENBURG, J-H. ZHANG, T. CHEN, A. MAFFIA, K. F. BLOM, A. P. COMBS and T. D. Y. CHUNG: J. Biomolec. Screen. , 1998, 3, 55–62.
   Web of Science ®Google Scholar
• R. KLEBE: Exp. Cell. Res. , 1988, 179, 362–373.
   PubMed Web of Science ®Google Scholar
• K. F. TENG and R. W. VEST: IEEE Trans. Comp. Hybrids Manuf. Technol. , 1987, 10, 545–549.
   Google Scholar
• K. F. TENG and R. W. VEST: IEEE Trans. Comp. Hybrids Manuf. Technol. , 1988, 11, 291–297.
   Google Scholar
• T. R. HEBNER, C. C. WU, D. MARCY, M. H. LU and J. C. STURM: Appl. Phys. Lett. , 1998, 72, 519–521.
   Web of Science ®Google Scholar
• A. ATKINSON, J. DOORBAR, A. JUDD, D. L. SEGAL and P. J. WHITE: J. Sol—Gel Sci. Technol. , 1997, 8, 1093–1097.
   Web of Science ®Google Scholar
• S. J. KIM and D. E. MCKEAN: J. Mater. Sci. Lett. , 1998, 17, 141–144.
   Google Scholar
• H. AGO, J. QI, K. TSUKAGOSHI, K. MURATA, S. OHSHIMA, Y. AOYAGI and M. YUMURA: J. Electroanal. Chem. , to be published.
   PubMedGoogle Scholar
• J. W. S. RAYLEIGH: Philos. Mag. , 1882, 14, 184–186.
   Google Scholar
• C. WEBER: Z. Angew. Math. , 1939, 11, 136–154.
   Google Scholar
• W. T. PIMBLEY and H. C. LEE: IBM J. Res Dev. , 1977,21, 21–30.
   Web of Science ®Google Scholar
• G. L. FILLMORE, W. L. BUEHNER and D. L. WEST: Ibm J. Res. Dev., 1977, 21, 37–47.
   Google Scholar
• F. C. LEE, R. N. MILLS and F. E. TULKE: IBM J. Res. Dev., 1984, 28, 307–313.
   Web of Science ®Google Scholar
• J. H. SONG, M. J. EDIRISINGHE and J. R. G. EVANS: J. Am. Ceram. Soc. , 1999, 82, 3374–3380.
   Web of Science ®Google Scholar
• W. D. TENG and M. J. EDIRISINGHE: J. Am. Ceram. Soc. , 1998, 81, 1033–1036.
   Web of Science ®Google Scholar
• P. F. BLAZDELL and J. R. G. EVANS: J. Mater. Process. Technol. , 2000, 99, 94–102.
   Web of Science ®Google Scholar
• P. F. BLAZDELL and S. KURODA: Surf. Coat. Technol. , 2000, 123, 239–246.
   Web of Science ®Google Scholar
• B. Y. TAY and M. J. EDIRISINGHE: J. Mater. Res. , 2001, 16, 373–384.
   Web of Science ®Google Scholar
• Q. F. XIANG, J. R. G. EVANS, M. J. EDIRISINGHE and P. F. BLAZDELL: Proc. Inst. Mech. Eng. B, J. Eng. Manuf, 1997, 211B, 211–214.
   Google Scholar
• M. MOTT, J. H. SONG and J. R. G. EVANS: J. Am. Ceram. Soc. , 1999, 82, 1653–1658.
   Web of Science ®Google Scholar
• S. BIEHL, R. DANZEBRINK, P. OLIVEIRA and M. A. AEGERTER: J. Sol—Gel Sci. Technol. , 1998, 13, 177–182.
   Web of Science ®Google Scholar
• C. E. SLADE and J. R. G. EVANS: J. Mater. Sci. Lett. , 1998, 17, 1669–1671.
   Google Scholar
• J. WINDLE and B. DERBY: J. Mater. Sci. Lett. , 1999, 18, 87–90.
   Google Scholar
• M. J. WRIGHT and J. R. G. EVANS: J. Mater. Sci. Lett. , 1999, 18, 99–101.
   Google Scholar
• B. A. GLOWACKI: Supercond. Sci. Technol. , 2000, 13, 1–8.
   Web of Science ®Google Scholar
• AL M. MOHEBI and J. R. G. EVANS: J. Combinator. Chem. , 2002, 4, 267–274.
   PubMedGoogle Scholar
• J. R. G. EVANS, M. J. EDIRISINGHE, P. V. COVENEY and J. EAMES: J. Euro. Ceram. Soc. , 2001, 21, 2291–2299.
   Web of Science ®Google Scholar
• G. PERCIN and B. T. K-YAKUB: Rev. Sci. Instr. , 2002, 73, 2193–2196.
   Web of Science ®Google Scholar
• J. H. SONG and J. R. G. EVANS: J. Rheol. , 1996, 40, 131–152.
   Web of Science ®Google Scholar
• C. AINSLEY, N. REIS and B. DERBY: J. Mater. Sci. , 2002, 37, 3155-3161.
   Google Scholar
• N. REIS and B. DERBY: in ‘Solid freeform and additive fabrication 2000’, MRS Symp. Proc. 625, 117-122; 2000, Warrendale, PA, Materials Research Society.
   Google Scholar
• K. A. M. SEERDEN, N. REIS, J. R. G. EVANS, P. S. GRANT, J. W. HALLORAN and B. DERBY: J. Am. Ceram. Soc. , 2001, 84, 2514–2520.
   Web of Science ®Google Scholar
• K. A. M. SEERDEN, N. REIS, B. DERBY, P. S. GRANT, J. W. HALLORAN and J. R. G. EVANS: in ‘Solid freeform and additive fabrication’, MRS Symp. Proc. 542, 141-146; 1999, Warrendale, PA, Materials Research Society.
   Google Scholar
• N. REIS, K. A. M. SEERDEN, B. DERBY, J. W. HALLORAN and J. R. G. EVANS: in ‘Solid freeform and additive fabrication’, MRS Symp. Proc. 542, 147-152; 1999, Warrendale, PA, Materials Research Society.
   Google Scholar
• C. AINSLEY, N. REIS and B. DERBY: Key Eng. Mater. , 2002, 206, 297–300.
   Google Scholar
• w. ZHANG, M. C. LEU, Z. M. JI and Y. N. YAN: Mater. Des. , 1999, 20, 139–145.
   Web of Science ®Google Scholar
• G. THORNELL, L. KLINTBER, T. LAURELL, J. NILSSON and S. JOHANSSON: J. Micromech. Microeng. , 1999, 9, 434–437.
   Web of Science ®Google Scholar
• H. M. NUR, J. H. SONG, J. R. G. EVANS and M. J. EDIRISINGHE: J. Mater. Sci., Mater. Electron. , 2002, 13, 213–219.
   Google Scholar
• A. R. BHATTI, M. MOTT, J. R. G. EVANS and M. J. EDIRISINGHE J. Mater. Sci. Lett. , 2001, 20, 1245–1248.
   Google Scholar
• M. MOTT and J. R. G. EVANS: J. Am. Ceram. Soc. , 2001, 84, 307–313.
   Web of Science ®Google Scholar
• X. ZHAO, J. R. G. EVANS, M. J. EDIRISINGHE and J. H. SONG: J. Mater. Sci. , 2002, 37, 1987-1992.
   Google Scholar
• X. ZHAO, J. R. G. EVANS, M. J. EDIRISINGHE and J. H. SONG: J. Am. Ceram. Soc. , 2002, 85, 2113–2115.
   Web of Science ®Google Scholar
• X. ZHAO, J. R. G. EVANS, M. J. EDIRISINGHE and J. H. SONG: J. Mater. Synth. Process. , 2001, 9, 319–327.
   Web of Science ®Google Scholar
• A. HUDD: in ‘The printing ink manual’, 5th edn, (ed. R. H. Leach et al), 678-698; 1999, Dordrecht, Kluwer Academic.
   Google Scholar
• M. A. ACITELLI, C. J. MERZ, F. M. ROSE and J. C. SMITH: US Patent 5076843, 31 Dec. 1991 (assigned to Lexmark Inc.).
   Google Scholar
• R. H. LEACH and R. J. PIERCE: in ‘The printing ink manual’, 5th edn, (ed. R. H. Leach et al), 1-13; 1999, Dordrecht, Kluwer Academic.
   Google Scholar
• I. HARGREAVES: in ‘The printing ink manual’, 5th edn, (ed. R. H. Leach et al), 636-677; 1999, Dordrecht, Kluwer Academic.
   Google Scholar
• R. MARSH: in ‘The printing ink manual’, 4th edn, (ed. R. H. Leach et al), 687; 1988, London, Van Nostrand Reinhold.
   Google Scholar
• J. E. FROMM: Ibm J. Res. Dev., 1984, 28, 322–333.
   Web of Science ®Google Scholar
• B. Y. TAY and M. J. EDIRISINGHE: J. Mater. Sci. Lett. , 2002, 21, 213–219.
   Google Scholar
• B. Y. TAY and M. J. EDIRISINGHE: Proc. R. Soc. (London) Series A, 2002, 458, 2039–2051.
   Web of Science ®Google Scholar
• W. L. BUEHNER, J. D. HILL, T. H. WILLIAMS and J. W. WOODS: Ibm J. Res. Dev., 1977, 21, 2–9.
   Web of Science ®Google Scholar
• H. RASHID, B. Y. TAY and M. J. EDIRISINGHE: J. Mater. Sci. Lett. , 2000, 19, 799–801.
   Google Scholar
• B. Y. TAY, H. RASHID and M. J. EDIRISINGHE: J. Mater. Sci. Lett. , 2000, 19, 1151–1154.
   Google Scholar
• W. D. TENG, M. J. EDIRISINGHE and J. R. G. EVANS: J. Am. Ceram. Soc. , 1997, 80, 486–494.
   Web of Science ®Google Scholar
• E. JORGE, T. CHARTIER and P. BOCH: J. Am. Ceram. Soc. , 1990, 73, 2552–2554.
   Web of Science ®Google Scholar
• K. HIGASHITANI, K. YOSHIDA, N. TANISE and H. MURATA: Colloid Surf. A, Physiochem. Eng. , 1993, 81, 167–175.
   Web of Science ®Google Scholar
• B. Y. TAY and M. J. EDIRISINGHE: IO be published.
   Google Scholar
• W. D. TENG and M. J. EDIRISINGHE: Br. Ceram. Trans. , 1998, 97, 109–173.
   Google Scholar
• M. E. R. SHANNAHAN and C. BOURGES: Int. J. Adhes. Adhes. , 1994, 14, 201–205.
   Web of Science ®Google Scholar
• lc S. BIRDI and D. T. VG: in ‘Contact angle, wettability and adhesion’, (ed. K. L. Mittal), 285-293; 1993, Utrecht, VSP.
   Google Scholar
• F. PAIUSEE and C. ALLAIN: J. Phys. II (France), 1996, 6, 1111–1119.
   Google Scholar
• F. PARISEE and C. ALLAIN: Langmuir, 1997, 13, 3598–3602.
   Web of Science ®Google Scholar
• w w Y. LAU and C. M. BURNS : J. Colloid Interf. Sci. , 1973, 45, 295–302.
   Web of Science ®Google Scholar
• H. Y. ERBIL: J. Adhes. Sci. Technol. , 1999, 13, 1405–1413.
   Web of Science ®Google Scholar
• A. K. RAY, J. LEE and H. L. TILLEY: Langmuir, 1988,4, 631–637.
   Web of Science ®Google Scholar
• S. CHANDRA, M. DI MARZO, Y. M. QIAO and P. TARTARINI: Fire Safety J., 1996, 27, 141–158.
   Web of Science ®Google Scholar
• S. MAENOSONO, C. D. DUSHKIN, S. SAITA and Y. YAMAGUCHI: Langmuir, 1999, 15, 957–965.
   Web of Science ®Google Scholar
• Y. SHENGJIE, Y. C. LAM, S. C. M. YU and K. C. TAM: J. Mater. Res. , 2001, 16, 2436–2451.
   Web of Science ®Google Scholar
• J. A. LEWIS: Ann. Rev. Mater. Sci. , 1997, 27, 147–173.
   Google Scholar
• M. J. EDIRISINGHE and J. R. G. EVANS: Int. J. High. Tech. Ceram. , 1986, 2, 249–278.
   Google Scholar
• S. MASIA, P. D. CALVERT, W. E. RHINE and H. K. BOWEN: J. Mater. Sci. , 1989, 24, 1907-1912.
   Google Scholar
• M. J. EDIRISINGHE, H. M. SHAW and K. L. TOMKINS: Ceram. 1992, 18, 193-200.
   Google Scholar
• author. ASHLEY: Mech. Eng. , 1993, 115, 50–53.
   Web of Science ®Google Scholar
• P. A. WEBB: J. Med. Eng. Technol. , 2000, 24, 149–153.
   PubMed Web of Science ®Google Scholar
• J. VANDER SLOTEN, R. VAN AUDEKERCKE and G. VAN DER PERRE: Ind. Ceram. , 2000, 20, 109–112.
   Google Scholar
• R. A. LEVY, S. GODVRI and R. H. CRAWFORD: Am. J. Neuroradiol. , 1994, 15, 473–477.
   PubMed Web of Science ®Google Scholar
• P. S. D'URSO, W. J. EARWAKER, T. M. BARKER, M. J. REDMOND, R. G. THOMPSON, D. J. EFFENEY and F. H. TOMLINSON: Br. J. Plast. Surg. , 2000, 53, 200–204.
   PubMedGoogle Scholar
• R. A. LEVY, T. M. G. CHU, J. W. HALLORAN, S. E. FEINBERG and S. HOLLISTER: Am. J. Neuroradiol. , 1997, 18, 1522–1525.
   PubMed Web of Science ®Google Scholar
• R. PETZOLD, H. F. ZEILHOFER and W. A. KALENDER: Comput. Med. Imag. Graph. , 1999, 23, 277–284.
   PubMed Web of Science ®Google Scholar
• T. J. COWARD, R. M. WATSON and I. C. WILKINSON: Int. J. Prosthodont„ 1999, 12, 20–27.
   PubMed Web of Science ®Google Scholar
• R. BIBB, P. FREEMAN, R. BROWN, A. SUGAR, P. EVANS and A. BOCCA: Proc. Inst. Mech. Eng. H, J. Eng. Med. , 2000, 214, 589–594.
   Google Scholar
• B. BORAH, G. J. GROSS, T. E. DUFRESNE, T. S. SMITH, M. D. COCKMAN, P. A. CHMIELEWSKI, M. W. LUNDY, J. R. HARTKE and E. W. SOD: Anatom. Rec. , 2001, 265, 101–110.
   PubMedGoogle Scholar
• J. C. ANDREWS, N. J. MANKOVICH, Y. ANZAI and R. B. LUFKIN: Am. J. Otol. , 1994, 15, 335–339.
   PubMedGoogle Scholar
• N. G. STOKER, N. J. MANKOVICH and D. VALENTINO: J. Oral Maxillofacial Surg. , 1992, 50, 466–471.
   PubMed Web of Science ®Google Scholar
• I. ONO, K. ABE, S. SHIOTANI and Y. HIRAYAMA: J. Craniofacial Surg. , 2000, 11, 527–537.
   PubMed Web of Science ®Google Scholar
• E. BERRY, J. M. BROWN, M. CONNELL, C. M. CRAVEN, N. D. EFFORD, A. RADJENOVIC and M. A. SMITH: Med. Eng. Phys. , 1997, 19, 90–96.
   PubMed Web of Science ®Google Scholar
• s. J. LEE, I. Y. JUNG, C. Y. LEE, S. Y. cult: and K. Y. KUM: Dental Traumatol. , 2001, 17, 114–119.
   PubMed Web of Science ®Google Scholar
• A. GRIFFIN, S. MCMILLIN, C. GRIFFIN and K. BARTON: Proc. 7th Int. Conf. on ‘Rapid prototyping’, (ed. A. J. Lightman et al), 355-359; 1997, Dayton, OH, University of Dayton.
   Google Scholar
• N. L. PORTER, R. M. PILLIAR and M. D. GRYNPAS: J. Biomed. Mater. Res. , 2001, 56, 504–515.
   PubMed Web of Science ®Google Scholar
• N. K. VAIL, L. D. SWAIN, W. C. FOX, T. B. AUFDLEMORTE, G. LEE and J. W. BARLOW: Mater. Des. , 1999, 20, 123–132.
   Web of Science ®Google Scholar
• D. W. HUTMACHER, I. ZEIN and S. H. TEOH: in ‘Processing and fabrication of advanced materials VIII’, (ed. K. A. Khor et al), 201-206; 2000, Singapore, World Science.
   Google Scholar
• I. ZEIN, D. W. HUTMACHER, K. C. TAN and S. H. TEOH: Biomaterials, 2002, 23, 1169–1185.
   PubMed Web of Science ®Google Scholar
• D. W. HUTMACHER, T. SCHANTZ, I. ZEIN, K. W. NG, S. H. TEOH and K. C. TAN: J. Biomed. Mater. Res. , 2001, 55, 203–216.
   PubMed Web of Science ®Google Scholar
• Z. XIONG, Y. N. YAN, R. J. ZHANG and L. SUN: SCr. Mater. , 2001, 45, 773–779.
   Web of Science ®Google Scholar
• I. GRIDA and J. R. G. EVANS: J. Euro. Ceram. Soc. , 2003, 23, 629–635.
   Web of Science ®Google Scholar
• F. C. GOMES DE SOUSA and J. R. G. EVANS: J. Am. Ceram. Soc. , 2003, 86, 517–519.
   Web of Science ®Google Scholar
• M. C. MELICAN, M. C. ZIMMERMAN, M. S. DHILLON, A. R. PONNAMBALAM, A. CURODEAU and J. R. PARSONS: J. Biomed. Mater. Res. , 2001, 55, 194–202.
   PubMed Web of Science ®Google Scholar
• R. IPPOLITO, L. LULIANO and A. GATTO: CIRP Ann., 1995, 44, 157–160.
   Google Scholar
• B. K. PAUL and S. BASKARAN: J. Mater. Process. Technol. , 1996, 61, 168–172.
   Web of Science ®Google Scholar
• W. M. SIGMUND, N. S. BELL and L. BERGSTROM: J. Am. Ceram. Soc. , 2000, 83, 1557–1574.
   Web of Science ®Google Scholar
• Z. w ZHAO and L. LAPERRIERE: Int. J. Prod. Res. , 2000, 38, 69–83.
   Web of Science ®Google Scholar
• S. N. JAYASINGHE, M. J. EDIRISINGHE and T. DE WILDE: J. Mater. Res. Innovat, 2002, 6, 92–95.
   Web of Science ®Google Scholar
• S. N. JAYASINGHE and M. J. EDIRISINGHE: J. Mater. Res. Innovat. , 2003, 7, 62–64.
   Web of Science ®Google Scholar
• A. J. MESTEL: J. Fluid Mech. , 1996, 312, 311–326.
   Web of Science ®Google Scholar
• M. CLOUPEAU and B. PRUNET-FOCH: J. Electrostat. , 1990, 25, 165–184.
   Web of Science ®Google Scholar
• C. H. CHEN, M. H. J. EDMOND, E. M. KELDER, B. MEESTER and J. SCHOONMAN: J. Aerosol Sci. , 1999, 30, 959–969.
   Web of Science ®Google Scholar
• W. D. TENG, Z. A. HUNEITI, W. MACHOWSKI, J. R. G. EVANS, M. J. EDIRISINGHE and W. BALACHANDRAN: J. Mater. Sci. L ett., 1997, 16, 1017–1019.
   Google Scholar
• S. N. JAYASINGHE AND M. J. EDIRISINGHE: J. Aerosol. Sci., 2002, 33, 1379–1388.
   Web of Science ®Google Scholar
• H. FAN, Y. LU, A. STUMP, S. T. REED, T. BAER, R. SCHUNK, V. PEREZ-LUNA, G. P. LO’PEZ AND C. J. BRINKER: Nature, 2000
   Google Scholar
• H. Y. FAN, S. REED, T. BAER, R. SCHUNK, G. P. LOPEZ AND C. J. BRINKER: Micropor. Mesopor. Mater., 2001, 44, 625–637.
   Web of Science ®Google Scholar