REFERENCES
- C. Darwin: ‘The voyage of the Beagle’, available on line http:// www. literature. org/authors/ darwin-charles/the-voyage-of-the-beagle/
- D. E. Goldberg: ‘Genetic algorithms in search, optimization and machine learning’: 1989, Reading, MA, Addision-Wesley.
- M. Mitchell: ‘An introduction to genetic algorithms’: 1998, New Delhi, Prentice-Hall.
- Z. Michalewicz: ‘Genetic algorithms +data structures=evolution programs’; 1999, Berlin, Springer-Verlag.
- R. L. Haupt and S. E. Haupt: ‘Practical genetic algorithms’: 1998, New York, John-Wiley.
- T. P. Bagchi: `Multiobjective scheduling by genetic algorithms'; 1999, Boston, Kluwer.
- K. Deb: ‘Multi-objective optimization using evolutionary algo-rithms’; 2001, Chicheter, John-Wiley.
- K. Deb: ‘Optimization for engineering design: algorithms and examples’; 1995, New Delhi, Prentice-Hall.
- N. Chakraborti: Survey. Math. Ind. , 2002, 10, 269.
- K. Deb and R. B. Agrawal: Complex Syst., 1995, 9, 115.
- K. Price and R. Storn: Dr Dobbs J., 1997, 22, 18.
- R. Kumar: ‘Feature selection, representation and classification’, Doctoral Dissertation, University of Sheffield, 1997.
- N. Marco, S. Lanteri, J. A. Désidéri, B. Mantel and J. Périaux: Survey. Math. Ind, 2000, 9, p. 207.
- R. Kumar and P. Rockett: Eva Computation, 2002, 10, 283.
- K. Ohno, K. Esfarjani and Y. Kawazoe: ‘Computational materials science from ab initio to Monte Carlo methods’; 1999, Berlin, Springer-Verlag.
- R. B. Bird, W. E. Stewart and E. N. Lightfoot: ‘Transport phenomena’; 1960, New York, John Wiley.
- C. Barr N, S. Gómez, D. Romero and A. Saavedra: Appl. Math. Lett. , 1999, 12, 85.
- D. Romero, C. Barrón and S. G6mez: Computer Phys. Commun. , 1999, 123, 87.
- R. Car and M. Parrinello: Phys. Rev. Lett. , 1985, 55, 2471.
- N. Chakraborti, P. S. De and R. Prasad: Z Metallkd. , 1999, 90, 508.
- N. Chakraborti, P. S. De and R. Prasad: Mater. Lett. , 2002, 55, 20.
- R. Prasad and N. Chakraborti: Met. Mater. Process. , 1998, 10, 203.
- N. Chakraborti, K. Misra, P. Bhatt, N. Barman and R. Prasad: J. Phase Equlib. , 2001, 22, 525.
- N. Chakraborti and R. Kumar: J. Phase Equlib. , 2003, 24, 132.
- G. R. Gupte: ‘Molecular dynamics studies of small hydrogenated silicon clusters and hydrogenated amorphous silicon’, Doctoral Dissertation, Indian Institute of Technology, Kanpur, 1998.
- N. Chakraborti, P. Mishra and S. Erkoq: J. Phase Equlib Diffusion, 2004, 25, 16.
- S. Erkoq, K. Leblebicioglu and U. Halici: Mater. Manuf Process. , 2003, 18, 329.
- B. Hartke: J. Phys. Chem. , 1993, 97, 9973.
- J. A. Niesse and H. R. Mayne: Chem. Phys. Lett. , 1996, 261, 576.
- J. A. Niesse and H. R. Mayne: J. Chem. Phys. , 1996, 105, 4700.
- M. Iwamatsu: J. Chem. Phys. , 2000, 112, 10976.
- R. T. Fu, K. Esfarjani, Y. Hashi, J. Wu, X. Sun and Y. Kawazoe: Set Rep. Res. Inst. Tohoku University Series A, Phys. Chem. Metall, 1997, 44, 77.
- J. R. Morris, D. M. Deaven, K. M. Ho, C. Z. Wang, B. C. Pan, J. G. Wacker and D. E. Turner: in ‘Evolutionary algorithms’, (ed. L. D. Davis et al), IMA Volumes in Mathematics and its Applications no. 111; 1999, Berlin, Springer.
- K. M. Ho, A. A. Shvartburg, B. Pan, Z. Y. Lu, C. Z Wang, J. G. Wacker, J. L. Fye and M. F. Jarrold: Nature, 1998, 329, 582.
- I. Rata, A. A. Shvartsburg, M. Horoi, T. Frauenheim, K. W. Siu and K. A. Jackson: Phys. Rev. Lett. , 2000, 85, 546.
- J. Wang, G. Wang, F. Deng, H Lee, W. Shen and J. Zhao: Chem. Phys. Lett. , 2001, 341, 529.
- G. Klimeck, R. C. Bowen, T. B. Boykin, C. S. Lazaro, T. A. Cwik and A. Stoica: Superlatt. Microstr. , 2000, 27, 77.
- D. M. Deaven and K. M. Ho: Phys. Rev. Lett. , 1995, 75, 288.
- C. Z. Wang and K. M. Ho: J. Phase Equilib. , 1997, 18, 516.
- S. Hobday and R. Smith: J. Chem. Soc., Faraday Trans. , 1997, 93, 3919.
- Q. Kong, L. Zhao, J. Zhuang, J. Xu, S. Qian, Y. Li, R. Cai, H. Hou and J. Wang: Int. J. Mass Spectrom. , 2001, 209, 69.
- Y. H. Luo, J. Zhao, S. Qiu and G. Wang: Phys. Rev. B, 1999, 59, 14903.
- J. Zhao, Y. Luo and G. Wang: European. Phys. J. D, 2001, 14, 309.
- T. X. Li, S. Y. Yin, Y. L. Ji, B. L. Wang, G. H. Wang and J. J. Zhao: Phys. Lett. A, 2000, 267, 403.
- H. Sun, Y. Ren, Y. H. Luo and G. Wang: Physica B, 2001, 293, 260.
- J. Wang J. Zhao, F. Ding, W. Shen>, H. Lee and G. Wang: Solid State Commun. , 2001, 117, 593.
- S. Erkoq: Z. Phys. D, 1994, 32, 257.
- S. Erkoç; and R. Shaltaf: Phys. Rev. A, 1999, 60, 3053.
- C. Roberts and R. L. Johnston: Phys. Chem. Chem. Phys. , 2001, 3, 5024.
- D. C. Sayle and R. L. Johnson: Curr. Opin. Solid State Mater. Set, 2003, 7, 3.
- J. Jan-Ole, M. Springborg and G. Seifert: Phys. Chem. Chem. Phys. , 2001, 3, 5130.
- J. Wang, G. Wang, X. Chen, W. Lu and J. Zhao: Phys. Rev. B, 2002, 66, 014419.
- Y. Ikeda: Mater. Trans. Jpn Inst. Mater., 1997, 38, 771.
- G. H. Jóhannesson, T. Bilgaard, A. V. Ruban, H. L. Skrivar, K. W. Jacobsen and J. K. Norskov: Phys. Rev. Lett. , 2002,88, 255506.
- B. Wang, S. Yin, G. Wang and J. Zhao: J. Phys. Condens. Matter, 2001, 13, L403.
- B. Wang, S. Yin, G. Wang, A. Buldum and J. Zhao: Phys. Rev. Lett. , 2001, 86, 2046.
- B. Wang, G. Wang and J. Zhao: Phys. Rev. B, 2001, 65, 235406.
- K. F. Pal: Physica A, 1996, 223, 283.
- K. Miyazaki and T. Inoue: Surf Sci., 2002, 501, 93.
- J. M. Yang, J. T. Horng, C. J. Lin and C. Y. Kao: EvoL Computation, 2001, 9, 421.
- M. Kesar and S. I. Stupp: Comput. Method. Appl. Mech. Eng. , 2000, 186, 373.
- N. Chen, C. Li and P. Qin: Eng. Appl. Artificial Intel. , 1998, 11, 669.
- H. Su, C. F. Yang, J. C. Shen and Z. L. Tian: Modell. Simulat. Mater. Set Eng. , 2001, 9, 97.
- M. Mahfouf, D. A. Linkens and M. F. Abbod: in Proc. 15th International Federation of Automatic Control (IFAC) World Congress on ‘Automatic control’, (ed. E. F. Camacho et al); 2002, Oxford, Pargamon Press.
- G. P. Rangaiah: Fluid Phase Equilib. , 2001, 187-188, 83.
- T. Bagchi: Mater. Manufact. Process. , 2003, 18, 341.
- S. Clement and N. Vagenas: Int. J. Rock Mech. Mining Set, 1995, 32, 167A.
- S. L. Jamsd-Jounela: Control Eng. Pract. , 2001, 9, 1021.
- C. L. Karr, D. A. Stanley and B. McWhorter: Comput. Method. Appl. Mech. Eng. , 2000, 186, 517.
- P. Mazumder and E. M. Rudnick: ‘Genetic algorithms for VLSI design, layout and test automation’; 1999, Upper Saddle River, NJ, Prentice-Hall.
- C. Mandal and P. P. Chakrabarti: Mater. Manufact. Process. , 2003, 18, 355.
- N. Chakraborti, P. Mishra and A. Banerjee: Mater. Lett. , 2003, 58, 136.
- P. Ghosh, A. Sundaram, V. Venkatasubramanian and J. M. Caruthers: Comput. Chem. Eng. , 2000, 24, 685.
- R. B. Kasat, A. K. Ray and S. K. Gupta: Mater. Manufact. Process. , 2003, 18, 523.
- D. Sadagopan and R. Pitchumani: Compos. Sci. Technot, 1998, 58, 571.
- E. S. Kim, C. Oh, S. Lee, B. Lee and I. Yun: Microelectronics 1, 2001, 32, 563.
- A. Dargys: Optic. Commun. , 2002, 206, 123.
- J. Toivanen, J. P. Hämäläinen, K. Miettinen and P. Tarvainen: Mater. Manufact. Process. , 2003, 18, 533.
- H. Cao, J. Yu, L. Kang, H. Yang and X. Ai: Comput. Chem. , 2001, 25, 251.
- G. Cao, M. Grugicic and B. Gersten: Appl. Surf Sci. , 2002, 199, 90.
- F. Pettersson, J. Hinneld and H. Saxén: in Int. Conf. on ‘Advances in materials and materials processing’, (ICAMMP-2002), (ed. N. Chakraborti and U. K. Chatterjee); 2002, New Delhi, Tata/ McGraw-Hill.
- F. Pettersson, J. Hinneld and H. Saxén: Mater. Manufact. Process. , 2003, 18, 385.
- J. Hinneld: ‘Data-driven modeling of burden distribution in the blast furnace’, Doctoral Dissertation, Abo Akademi University, Abo, Finland, 2003.
- A. Bikas, N. Pantelelis and A. Kanarachos: J. Mater. Process. Technot , 2002, 122, 112.
- D. L. Carroll: Am. Inst. Aeronaut. Astronaut. J. , 1996, 34, 338.
- C. Cheng: J. Phys. D: Appl. Phys. , 2000, 33, 1169.
- B. M. Kariuki, H. Serrano-Gonzalez, R. L. Johnston and K. D. M. Harris: Chem. Phys. Lett. , 1997, 280, 189.
- H. Ahonen, P. A. de Suza Junior and V. K. Garg: Nucl. Instrum. Method. Phys. Res. B, 1997, 124, 633.
- B. K. Lavine, A. Moores and L. K. Helfend: J. Analyt. Appl. Pyrolysis, 1999, 50, 47.
- A. L. Mackay: J. Molecular Struct. (Theochem), 1995, 336, 293.
- J. M. Newsam, C. M. Freeman and F. J. J. Leusen: Curr. Opinion Solid State Mater. Sci. , 1999, 4, 515.
- A. D. Dane, A. Veldhuis, D. K. G. de Boer, A. J. G. Leenaers and L. M. C. Buydens: Physica B, 1998, 253, 254.
- A. Ulyanenkov, K. Omote and J. Harada: Physica B, 2000, 283, 237.
- T. Lafford, M. Taylor, J. Wall and N. Loxley: J. Cryst. Growth, 2000, 221, 520.
- M. Taylor, J. Wall, N. Loxley, M. Wormington and T. Lafford: Mater. SeL Eng. B, 2001, 80, 2001, 95.
- P. Zaumseil, T. A. Lafford and M. Taylor: J. Phys. D: Appl. Phys. , 2001, 34, A52.
- Z. Klencsár: Nucl. Instrum. Method. Phys. Res. B, 1997, 129, 527.
- D. Luna-Moreno, E. De la Rosa-Cruz, F. J. Cuevas, L. E. Regalado, P. Salas, R. Rodriguez and V. M. Castailo: Opt. Mater. , 2002, 19, 275.
- O. Sahin, P. Sayan and A. N. Bulutcu: J. Cryst. Growth, 2000, 216, 475.
- W. Kuzmicz: J. Vac. Set Technot B, 1996, 14, 408.
- S. M. Tam and K. C. Cheung: Expert Syst. Applicat. , 2000, 18, 17.
- M. Brezocnik and M. Kovacic: Mater. Manufact. Process. , 2003, 18, 475.
- P. Salek, J. Tarasiuk, K. Wierzbanowski and A. Baczmariski: Mater. Set Forum, 1998, 273-275, 139.
- P. Salek, J. Tarasiuk, K. Wierzbanowski and A. Baczmariski: in ‘Texture and anistropy in polycrystals’, (ed. R. A. Schwarzer); 1998, Zurich, Trans Tech Publications.
- P. Salek, J. Tarasiuk and K. Wierzbanowski: Archiv. MetalL, 1999, 44, 175.
- P. Salek, J. Tarasiuk and K. Wierzbanowski: Cryst. Res. Technot, 1999, 34, 1073.
- J. Tarasiuk and K. Wierzbanowski: Mater. Manufact. Process. , 2003, 18, 463.
- C. Chiroiu, L. Munteanu, V. Chiroiu, P. P. Delsanto and M. Scalerandi: Inverse Problems, 2000, 16, 121.
- K. Balasubramaniam and N. S. Rao: Composites Part B, 1998, 29B, 171.
- B. Deo, K. Deb, S. Jha, V. Sudhakar and NV. Sridhar: ISIJ Int. , 1998, 38, 98.
- R. J. Paul and T. S. Chaney: Simulat. Pract. Theory, 1998, 6, 601.
- L. Tang, J. Liu, A. Rong and Z. Yang: Eur. J. Operat. Res. , 2000, 120, 423.
- A. J. Skinner and J. Q. Broughton: Modell. Simulat. Mater. Set Eng. , 1995,3, 371.
- B. Deo, A. Datta, B. Kukreja, R. Rastogi and K. Deb: 1994, Steel Research, 65, 528.
- R. Rastogi, K. Deb, B. Deo and R. Boom: Steel Res., 1994, 65, 472.
- P. Sheel and B. Deo: in Proc. Genetic and Evolutionary Computation Conf. (GECCO-99), Vol. 2, (W. Banzhaf et al); 1999, San Francisco, Morgan Kaufmann.
- B. Deo: Proc. Int. Conf. on ‘Advances in materials and materials processing’, (ICAMMP-2002), (N. Chakraborti and U. K. Chatterjee); 2002, New Delhi, Tata/McGraw-Hill.
- V. Srivastava and B. Deo: Mater. Manufact. Process. , 2003, 18, 401.
- N. Chakraborti, K. Deb and D. K. Jain: EvoNews, 1997, 4, 2.
- B. arler and B. Filipi 6: Proc. 2nd Int. Metallurgical Conf. on ‘Continuous casting of billets’, Oct. 1997, Tfinec, Czech Republic, Expert Group, Steelmaking of Czech Metallurgical Society/ VDEh.
- B. Filipik and B. S' arler: Proc. 3rd Int. Conf. on ‘Design to manufacture in modern industry’, (DMI'97), (ed. A. Jezernik and B. Dolgak); 1997, Portoroz, Slovenia, Faculty of Mechanical Engineering, University of Maribor.
- B. FilipiB and B. arler: Proc. 6th European Cong. on ‘Intelligent techniques and soft computing’, (EUFIT'98), Vol. 1, (ed. H. J. Zimmermann); 1998, Aachen, Verlag Mainz.
- N. Chakraborti and A. Mukherjee: Ironmaking Steelmaking, 2000, 27, 243.
- N. Chakraborti, R. Kumar and D. Jain: Appl. Math. Modell. , 2001, 25, 287.
- C. A. Santos, J. A. Spim Jr, M. C. F. Ieradi and A. Garcia: Appl. Math. Modell. , 2002, 26, 1077.
- N. Chakraborti, R. S. P. Gupta and T. K. Tiwari: Ironmaking Steelmaking, 2003, 30, 273.
- N. Chakraborti, K. S. Kumar and G. G. Roy: Proc. Int. Conf. on ‘Advances in materials and materials processing’, (ICAMMP-2002), (ed. N. Chakraborti and U. K. Chatterjee); 2002, New Delhi, Tata/McGraw-Hill.
- T. C. Chen: ‘A hybrid intelligent system for process modeling and control using a neural network and a genetic algorithm’, Doctoral Dissertation, University of Iowa, Iowa City, Iowa, 1997.
- R. L. Wood: Eng. Comput. , 1996, 13, 43.
- K. Deb, A. R. Reddy and G. Singh: Mater. Manufact. Process. , 2003, 18, 409.
- D. D. Wang, A. K. Tieu, F. G. de Boer, B. Ma and W. Y. D. Yuen: Eng. Applic. Artific. IntelL, 2000, 13, 397.
- N. Chakraborti and A. Kumar: Mater. Manufact. Process. , 2003, 18, 433.
- W. H. Ray and J. Szekely: ‘Process optimization with applications in metallurgy and chemical engineering’; 1973, New York, John Wiley.
- M. Brezocnik, J. Balic and Z. Kampus: J. Mater. Process. Technot, 2001, 109, 20.
- S. H. Chung, J. H. Lee, H. S. Chung and S. M. Hwang: Int. J. Mech. SeL, 2000, 42, 965.
- J. S. Chung and S. M. Hwang: J. Mater. Process. TechnoL, 1997, 72, 20.
- C. A. C. Ant6nio and N. M. Dourado: J. Mater. Process. Technot, 2002, 121, 403.
- S. Roy, S. Ghosh and R. Shivpuri: Int. J. Machine Tool. Manufact. , 1997, 37, 29.
- J. S. Chung and S. M. Hwang: J. Mater. Process. TechnoL, 1998, 80-81, 136.
- K. Mori, and M. Yamamoto and K. Osakada: J. Mater. Process. Technot, 1996, 60, 463.
- U. Dirksen, N. Austerhoff, F. Maevus and M. Kleiner: J. Mater. Process. TechnoL, 2001, 115, 136.
- S. Mihelcic, T. Slivnik and B. Vilfan: Eng. Struct. , 1997, 19, 1043.
- T. Ono and T. Ikeda: Proc. 6th European Cong. on ‘Intelligent techniques and soft computing’, (EUFIT'98), Vol. 1, (ed. H. J. Zimmermann); 1998, Aachen, Verlag Mainz.
- P. PotoèMik and I. Grabec: Neurocomputing, 2002, 43, 107.
- S. Mohanty, B. Mahanty and P. K. J. Mohapatra: Mater. Manufact. Process. , 2003, 18, 447.
- Z. C. Lin and C. H. Deng: J. Mater. Process. Technol, 2001, 115, 302.
- M. S. Shunmugam, S. V. B. Reddy and T. T. Narendran: Int. J. Machine Tool. Manufact. , 2000, 40, 401.
- W. T. Chien and C. Y. Chou: J. Mater. Process. Technot, 2001, 118, 442.
- C. S. Krishna, B. N. Sashank, B. M. Rajaprakash, B. K. Muralidhar and V. K. Basalalli: Proc. Int. Conf. on ‘Advances in materials and materials processing’, (ICAMMP-2002), (ed. N. Chakraborti and U. K. Chatterjee); 2002, New Delhi, Tata/ McGraw-Hill.
- K. Deb: 1991, AAAI J. , 29, 2013.
- T. Yokota, T. Taguchi and M. Gen: Comput. Ind Eng. , 1999, 37, 379.
- B. Deo, A. Gupta, B. V. S. Girish and A. K. Jena: Met. Mater. Process. , 1998, 10, 323.
- P. Norberg: Scand. J. MetalL, 1997, 26, 206.
- T. C. Fogarty: in ‘Handbook of evolutionary computation’, (ed. T. Back et al); 1997, Bristol/Oxford, Institute of Physics Publishing/Oxford University Press.
- K. Deb and N. Chakraborti: in Proc. 6th European Cong. on ‘Intelligent techniques and soft computing’, (EUFIT'98), Vol. 1, (ed. H. J. Zimmermann); 1998, Aachen, Verlag Mainz.
- N. Chakraborti, K. Deb and A. Jha: Steel Res., 2000, 71, 396.
- R. G. Song and Q. Z. Zhang: Mater. Set Eng. C, 2001, 17, 133.
- R. G. Song and Q. Z. Zhang: J. Mater. Process. Technot, 2001, 117, 84.
- B. J. Reardon: Modell. Simulat. Mater. SeL Eng. , 1998, 6, 717.
- B. J. Reardon: 1998, Modell. Simulat. Mater. SeL Eng. , 6, 735.
- B. J. Reardon: 1999, Modell. Simulat. Mater. SeL Eng. , 7, 1061.
- B. J. Reardon and S. R. Bingert: Acta Mater., 2000, 48, 647.
- B. J. Reardon: Mater. Manufact. Process. , 2003, 18, 493.
- M. F. Ashby: Acta MetalL, 1972, 20, 887.
- M. G. McKimpson: Mater. Manufact. Process. , 1996, 11, 935.
- Q. Y. Pan, W. D. Huang, R. G. Song, Y. H. Zhou and G. L. Zhang: Surf Coat. Technot, 1998, 102, 245.
- M. Ridha, K. Amaya and S. Aoki: Corrosion, 2001, 57, 794.
- P. Miltiadou and L. C. Wrobel: Corrosion, 2002, 58, 912.
- X. T. Feng and C. Yang: Comput. Method. Appl. Meek Eng. , 2001, 190, 5957.
- K. Sivakumar, N. G. R. Iyengar and K. Deb: Compos. Struct. , 1998, 42, 265.
- K. Sivakumar, N. G. R. Iyengar and K. Deb: Adv. Compos. Mater. , 1999, 8, 295.
- J. S. Kim, C. G. Kim and C. S. Hong: Compos. Struct. , 1999, 46, 171.
- J. S. Kim, C. G. Kim and C. S. Hong: Compos. Struct. , 2001, 51, 285.
- K. Mahesh, N. N. Kishore and K. Deb: Adv. Compos. Mater. , 1996, 5, 87.
- R. Spallino and G. Thierauf: Comput. Struct. , 2000, 78, 691.
- G. Soremekun, Z. Gürdal, C. Kassapoglou and D. Toni: Compos. Struct. , 2002, 56, 53.
- A. Nag, D. R. Mahapatra and S. Gopalakrishnan: Smart Mater. Struct. , 2002, 11, 899.
- W. J. Staszewski, K. Worden, R. Wardle and G. R. Tomlinson: Smart Mater. Struct. , 2000, 9, 298.
- J. P. Davim and C. A. C. Ant6nio: J. Mater. Process. Technol, 2001, 112, 78.
- I Rajendran and S. Vijayarangan: Comput. Struct. , 2001,79, 1121.
- E. Wilson, C. Karr and S. Messimer: Mater. Manufact. Process. , 2003, 18, 509.
- T. Eisenhammer: Thin Solid Films, 1995, 270, 1.
- S. S. Han, L. Cai, A. Rohatgi and G. May: Intel!. Eng. Syst. Through Artific. Neur. Network, 1996, 6, 343.
- T. Eisenhammer, M. Lazarov and R. Sizmann: Proc. SPIE, 1992, 1727, 194.
- A. Grauel, L. A. Ludwig and G. Klene: Int. J. Approx. Reason. , 1997, 16, 89.
- I. Rechenberg: Comput. Meth. App!. Mech. Eng. , 2000, 186, 125.
- M. Schutz and H. P. Schwefel: Comput. Meth. App!. Mech. Eng. , 2000, 186, 141.
- S. M. Hur, K. H Choi, S. H. Lee and P. K. Chang: J. Mater. Process. Technol, 2001, 112, 236.
- N. Chakraborti and R. Prasad: Bull. Mater. Set, 2003, 26, 127.
- H. J. Li, K. Y Jiang and K. Z Li: Mater. Lett. , 2003, 57, 2366
- N. Chakraborti, K. S. Kumar and G. G. Roy: J. Mater. Eng. Perform. , 2003, 12, 430
- C. A. Santos, J. A. Spim and A. Garcia: Eng. App!. Artific. Intel!. , 2003, 16, 511.
- N. Chakraborti, P. S. Mishra, A. Banerjee and R. Dewri: Proc. Int. Cong. on ‘Evolutionary methods for design, optimization and control with applications to industrial problems’ (EUROGEN 2003), (ed. G. Bugeda et al.); 2003, Barcelona, CIMNE.
- N. Chakraborti: Mater. Manufact. Process. , 2003, 18, vii.
- M. D. Vose: ‘The simple genetic algorithm foundation and theory’; 1999, Cambridge, MA, MIT Press.